상변화 물질(PCM)은 상전이 동안 에너지를 흡수하거나 방출할 수 있는 잠열 저장 물질로 활용된다. 최근 수십 년 동 안, 연구자들은 다양한 온도 적용을 위한 건설 물질로의 다양한 PCM의 통합을 탐구해 왔다. 그러나, PCM을 통합하는 콘크리트 의 기계적 및 열적 반응은 통합 방법에 의해 영향을 받는다. PCM을 콘크리트에 추가하기 위한 여러 기술이 제안되었다. 그럼 에도 불구하고, 콘크리트에 마이크로 캡슐화 PCM(m-PCM)의 통합은 종종 기계적 강도의 상당한 감소를 초래한다. 기존 콘크리 트에 m-PCM의 추가와 관련된 한계를 극복하기 위해, 예외적인 강도 및 내구성 특성으로 인해 초고성능 시멘트 복합체(UHPCC) 가 선호된다. 따라서, 본 연구에서는 기존 기술의 단점을 해결하기 위해 PCM을 통합한 신규 나노 엔지니어링 UHPCC를 개발하 였다. 또한, 시멘트 복합체의 기계적 및 열적 성능을 향상시키기 위해 다중 벽 탄소 나노튜브(MWCNT)를 추가하였다. 결과는 MWCNT의 포함이 기계적 성능을 향상시켰을 뿐만 아니라 시멘트 복합체의 열적 성능을 향상시켰다는 것을 보여 주었다.

In this study, the bending performance of flexural specimens fabricated with ECC was compared with typical reinforced concrete specimens. Test results show that the deflection of specimens made of ECC is increased compared with that of normal concrete specimens, and ductile fracture behavior is shown.

In this study, dry shrinkage was evaluated by adding limestone powder according to the substitution ratio to Engineered Cementitious Composite. The test method was carried out by KS F 2424, and it was confirmed that the drying shrinkage tends to increase slightly as the substitution ratio of the limestone fine powder increases.

The purpose of this study was to evaluate flowability of engineered cemetitious composite(ECC) Using blast furnace slag and fly ash as a binder in mixture. From the test result, flowability value of all ECC mixtures show good flowability and self compacting performance.

The purpose of this study was to evaluate flowability of engineered cemetitious composite(ECC) Using blast furnace slag and fly ash as a binder in mixture. From the test result, flowability value of all ECC mixtures show good flowability and self compacting performance.

This study was performed to evaluate compressive strength of Engineered Cementitious Composite(ECC) using limestone powder. In order to evaluate compressive strength, specimens were manufactured based on KS F 2403 Standard. From the test result, compressive strength of specimens using 10% and 20% limestone powder was lower than plain specimens.

The Chloride ion penetration resistance of Engineered cementitious composite using surface coating material was evaluated in this study. The test results showed that the amount of chloride ion of surface coated specimens were decreased approximately 22 % lower than that of plain specimens