Pumps for hazardous materials handling areas of self service stations are still scattered in the country, generator room, engine room of the small vessels, etc. are installed inside buildings against big is the risk of fire extinguishers are installed only. These facilities are in severe climate change because it is an open space area, as well as a water based fire extinguishers may not be suitable for that type of gas extinguishing system is also adaptable. This study features a compressed air port operation principles and characteristics, equipment, fire extinguishers, which can minimize the casualties and property losses from fire against hazardous substances in small business, design requirements, domestic contain fire extinguishers laws and foreign Compression Four fire extinguishers through the air and foreign regulations comparative analysis of the compressed air port installations such as fire extinguishers and applied to study the measures to be included are fire extinguishers installed in the country. Climate change is a big country review In winter, water based fire extinguishers are also concerned about the freeze, but compared to the foreign installations were exploring ways to work in the country. CAF is especially preferred that the fire extinguishing performance and to demonstrate the protective space as there is a risk of frost risk significantly less compressed air port digestion plant.

A core device of foam system is the in-line eductor and it is the device to mix the foam liquid into liquid solution proper to the use density and the mixture ratio must be kept regularly regardless of changing fluid condition of the front and rear end of the in-line eductor. However, if the flux of the pressurized water changes, the mixture ratio is not kept regularly, and so it becomes a cause which a performance of fire-extinguishing deteriorates in discharging foam liquid. I devise a method to improve it that the metering orifice type in-line eductor is improved into the metering venturi type in-line eductor, the fluctuation of the mixture ratio to the flux change of the pressurized water is minimized and the performance of fire-extinguishing is kept regularly. As this method is simple in its structure and can be designed at a low cost, it helps for maintenance as well. In the future, it seems to need the research for the metering nozzle type in-line eductor in the future.