The PCHE(Printed Circuit Heat Exchanger)-type heat exchanger, which was fabricated by etching and diffusion bonding, was used to hydrogen station, VHTR(Very High Temperature Reactor), SMR and so on. The hydrogen station equipped with PCHE-type heat exchanger is necessary to inject the hydrogen gas into facilities, for instance, such as HFCV(Hydrogen Fuel Cell Vehicle) and power systems. The purpose of this study is to investigate the thermal characteristics of thin plate of PCHE depending on constraint conditions through numerical analysis. As the results, it showed that thermal stress of thin plate, which was not performed diffusion bonding at all, was larger than that, which was performed perfect diffusion bonding, and its maximum difference was about 3 times. Further it was confirmed that the thermal characteristics of thin plate could be obtained by investigating the heat flux.

신재생에너지로서 수소에 대한 수요가 증가하고 있으나 기존의 화석 연료와 달리 수소는 연료 공급을 위한 전용 충전소가 필 요하며, 이러한 인프라 확보를 위해서 수소충전소의 위험성 평가가 선행되어야 한다. 따라서 본 연구에서는 정성적 위험성평가와 정량적 위험성 평가로 구분하여 수소충전소에 대한 위험성평가를 수행하였다. 정성적 평가는 Hazard and Operability Analysis(HAZOP) 기법을 사용 하여 Dispenser Module을 두 개의 Node로 평가하였으며, Criticality Estimation Matrix에 따라 Filter의 막힘으로 인한 사고와 고압 사고의 위험 도가 High Level로 평가되었다. 정량적 위험성 평가는 Hydrogen Korea Risk Assessment Module(Hy-KoRAM)을 사용하여 화재의 형상과 피해영 향범위를 나타냈고, 개인적 위험도와 사회적 위험도에 대한 평가를 수행하였다. 개인적 위험도는 수소충전소로부터 약 100m 떨어진 공공 시설 부근까지 추가적인 안전조치가 고려되는 As Low As Reasonably Practicable(ALARP) 구간의 위험도를 보였고, 사회적 위험도 역시 약 10명의 사망자가 발생할 사고빈도가 1E-04/year로 도출되며 ALARP 구간 내에 나타났다. 정성적·정량적 위험성 평가 결과, 공정 단계의 추 가적인 안전 조치와 수소충전소 부근의 제한구역 설정을 통하여 안전성 향상 방안을 제시하였다.

In order to cope with climate change, the UN Climate Summit announced a policy to reduce carbon emissions to 0% by 2050. As a result, hydrogen energy is attracting attention as a new energy. Hydrogen energy is one of the future clean energy sources and is the most abundant and ideal fuel on Earth that does not emit pollutants. On the other hand, there is a risk of wide explosion range, easy ignition, and fast flame speed. As a result, There is limited use of hydrogen gases, and research is being conducted to safely use hydrogen gases. However, the localization rate of hydrogen-related equipment parts is low and dependence on foreign countries is high. In order to reduce dependence on foreign countries, this study designed and analysis a model of ultra-high pressure relief valve, which is a safety device for hydrogen charging stations. In order to evaluate the structural stability, a spring, a valve disk, a valve guide, and a valve spindle, which are components of an ultra high pressure relief valve, were applied with pressure resistance test and water pressure test criteria according to KS B ISO 19880-3, and analyzed using an Ansys workbench 2021 R1. Through the analysis results, the structural stability of the relief valve under the water pressure test and the pressure resistance test conditions confirmed.