To improve the lithium-ion battery performance and stability, a conducting polymer, which can simultaneously serve as both a conductive additive and a binder, is introduced into the anode. Water-soluble polyaniline:polystyrene sulfonate (PANI:PSS) can be successfully prepared through chemical oxidative polymerization, and their chemical/mechanical properties are adjusted by varying the molecular weight of PSS. As a conductive additive, the PANI with a conjugated double bond structure is introduced between active materials or between the active material and the current collector to provide fast and short electrical pathways. As a binder, the PSS prevents short circuits through strong π‒π stacking interaction with active material, and it exhibits superior adhesion to the current collector, thereby ensuring the maintenance of stable mechanical properties, even under high-speed charging/discharging conditions. Based on the synergistic effect of the intrinsic properties of PANI and PSS, it is confirmed that the anode with PANI:PSS introduced as a binder has about 1.8 times higher bonding strength (0.4 kgf/20 mm) compared to conventional binders. Moreover, since active materials can be additionally added in place of the generally added conductive additives, the total cell capacity increased by about 12.0%, and improved stability is shown with a capacity retention rate of 99.3% even after 200 cycles at a current rate of 0.2 C.

The high level of lithium storage in synthetic porous carbons has necessitated the development of accurate models for estimating the specific capacity of carbon-based lithium-ion battery (LIB) anodes. To date, various models have been developed to estimate the storage capacity of lithium in carbonaceous materials. However, these models are complex and do not take into account the effect of porosity in their estimations. In this paper, a novel model is proposed to predict the specific capacity of porous carbon LIB anodes. For this purpose, a new factor is introduced, which is called normalized surface area. Considering this factor, the contribution of surface lithium storage can be added to the lithium stored in the bulk to have a better prediction. The novel model proposed in this study is able to estimate the lithium storage capacity of LIB anodes based on the porosity of porous carbons for the first time. Benefiting porosity value (specific surface area) makes the predictions quick, facile, and sensible for the scientists and experts designing LIBs using porous carbon anodes. The predicted capacities were compared with that of the literature reported by experimental works. The remarkable consistency of the measured and predicted capacities of the LIB anodes also confirms the validity of the approach and its reliability for further predictions.

nanotubes were successfully synthesized using an electrospinning technique followed by calcination in air. The nanotubes were the single phase nature of and consisted of approximately 14 nm nanocrystals. SEM and TEM characterizations demonstrated that uniform hollow fibers with an average outer diameter of around 124 nm and wall thickness of around 25 nm were successfully obtained. As anode materials for lithium ion batteries, the nanotubes exhibited excellent cyclability and reversible capacity of up to 25 cycles at as compared to nanoparticles with a capacity of . Such excellent performance of the nanotube was related to the one-dimensional hollow structure which acted as a buffer zone during the volume contraction and expansion of Sn.