Nuclear power generation is expected to be enlarged for domestic electricity supply based on the 10th Basic Plan of Long-Term Electricity Supply and Demand. However, the issues on the disposal of spent nuclear fuel or high-level radioactive waste has not been solved. KBS-3 concept of the deep geological disposal and pyroprocessing has been investigated as options for disposal and treatment way of spent nuclear fuel. In other way, the radionuclide management process with 6 scenarios are devised combining chlorination treatment and alternative disposal methods for the efficient disposal of spent nuclear fuel. Various scenarios will be considered and comprehensively optimized by evaluation on many aspects, such as waste quantity, radiotoxicity, economy and so on. Level 0 to 4 were identified with the specialized nuclide groups: Level 0 (NFBC, Hull), Level 1 (Long-lived, volatile nuclides), Level 2 (High heat emitting nuclides), Level 3 (TRU/RE), Level 4 (U). The 6 options (Op.1 to 6) were proposed with the differences between scenarios, for examples, phase types of wastes, the isolated nuclide groups, chlorination process sequences. Op.1 adopts Level 0 and 1 to separate I, Tc, Se, C, Cs nuclides which are major concerns for long-term disposal through heat treatment. The rest of spent nuclear fuel will be disposed as oxide form itself. Op.2 contains Sr separation process using chlorination by MgCl2 and precipitation by K2CO3to alleviate the burden of heat after heat treatment process. U/TRU/RE will be remained and disposed in oxide form. Op.3 is set to pyroprocessing as reference method, but residual TRU/RE chlroides after electrorefining will be recovered as precipitates by K3PO4. Op.4 introduces NH4Cl to chlorinate TRU/RE from oxides after Op.2 applied and precipitates them. TRU/RE/Sr will be simultaneously chlorinated by NH4Cl without MgCl2 in Op.5. Then, chlorinated Sr and TRU/RE groups will be separated by post-chlorination process for disposal. But, chlorinated Sr and TRU/RE are designed not to be divided in disposal steps in Op.6. In this study, the mass flow analysis of radionuclide management process scenarios with updated process variables are performed. The amount and composition of wastes by types will be addressed in detail.

In this theoretical study, a design and performance analysis theory of a micro flowrate and high pressure air-compressor is developed. The governing equations are from the gas state equation and fluid dynamic theories because the working fluid in the air compressor is in a gas phase. A case study was conducted to design a reciprocating type of air compressor which the target performance was 0.6liter/min in the volume flowrate with 5atg in air pressure at 1,600rpm rotational speed. Geometrical size of the model air compressor designed is 10mm in stroke, 20mm in bore with 4.79 compression ratio. From the performance analysis of the model compressor, it was found that the air volume flowrate produced was 0.6liter/min with 5.81atg in pressure. The design theory of a micro-size high-pressure air compressor developed in this study is expected to be very useful design tools in NANO technology industry.