This study investigated species identification and labeling compliance of 48 shrimp products sold in the Korean online markets. Species identification was conducted using the standard DNA barcoding method, using the cytochrome c oxidase subunit I gene. The obtained sequences were compared with those deposited in the NCBI GenBank and BOLD Systems databases. Additionally, phylogenetic analysis was performed to further verify the identified shrimp species. Consequently, 16 shrimp species were identified, including Penaeus vannamei, Pandalus borealis, Palaemon gravieri, Leptochela gracilis, Penaeus monodon, Pleoticus muelleri, Metapenaeopsis dalei, Euphausia pacifica, Lebbeus groenlandicus, Trachypenaeus curvirostris, Argis lar, Metanephrops thomsoni, Metapenaeopsis barbata, Alpheus japonicus, Penaeus chinensis, and Mierspenaeopsis hardwickii. The most prevalent species was Penaeus vannamei, found in 45.8% of the analyzed products. A significant mislabeling rate of 72.9% was found; however, upon excluding generic names such as shrimp, the mislabeling rate reduced to 10.4%. The mislabeling rate was higher in highly-processed products (89.3%) compared with that in minimally-processed products (50%). No correlation was found between the country of origin and mislabeling rate. The results of this study provide crucial data for future monitoring of shrimp products and improving the labeling of shrimp species in Korea.

The aim of this review is to communicate some essential knowledge of the underlying mechanism of the corrosion of structural containment alloys during molten salt reactor operation in the context of prospective online monitoring in future MSR installations. The formation of metal halide species and the progression of their concentration in the molten salt do reflect containment corrosion, tracing the depletion of alloying metals at the alloy salt interface will assure safe conditions during reactor operation. Even though the progress of alloying metal halides concentrations in the molten salt do strongly understate actual corrosion rates, their prospective 1st order kinetics followed by near-linearly increase is attributed to homogeneous matrix corrosion. The service life of the structural containment alloy is derived from homogeneous matrix corrosion and near-surface void formation but less so from intergranular cracking (IGC) and pitting corrosion. Online monitoring of corrosion species is of particular interest for molten chloride systems since besides the expected formation of chromium chloride species CrCl2 and CrCl3, other metal chloride species such as FeCl2, FeCl3, MoCl2, MnCl2 and NiCl2 will form, depending on the selected structural alloy. The metal chloride concentrations should follow, after an incubation period of about 10,000 hours, a linear projection with a positive slope and a steady increase of < 1 ppm per day. During the incubation period, metal concentration show 1st order kinetics and increasing linearly with time1/2. Ideally, a linear increase reflects homogeneous matrix corrosion, while a sharp increase in the metal chloride concentration could set a warning flag for potential material failure within the projected service life, e.g. as result of intergranular cracking or pitting corrosion. Continuous monitoring of metal chloride concentrations can therefore provide direct information about the mechanism of the ongoing corrosion scenario and offer valuable information for a timely warning of prospective material failure.

Industrial Motors diagnostic equipment is highly dependent on the automation system, so if there are defects in the automation equipment, it can only rely on the operator’s intuitive judgment.To help with intuitive judgment, Park’s Vactor Approach(PVA) represents the current signal as a pattern of circles, so it can tell if a fault occurs when the circle is distorted. However, the failure to judge the degree of distortion of the circle pattern is the basis of the fault, so it will face difficulties. In this paper, in order to compare the faults of PVA, the period of d-axis current of PVA pulsation was mastered, so that two phase differences occurred in the same signal source. Through experiments, it is confirmed that this is a 90 degree cross formation of PVA, which is convenient for judging from the vision that there is no fault, thus helping the operator to make intuitive judgment.

최근 선박의 안전운항에 대한 요구가 증가되면서, 국제해사기구에서는 SOLAS규정에 따라 선박의 다양한 정보를 제공하는 AIS의 의무 장착을 시행하고 있다. AIS장비는 선박의 자선 정보를 주변 선박 및 육상에 자동으로 브로드캐스팅방식으로 발신하고, 또한 주변 선박의 정보를 수신할 수 있는 장비이다. 최근에는 다양한 디스플레이 장치에 서비스를 제공하기 위한 시도가 진행되고 있으며, 특히 웹 응용을 이용하는 사례가 많아지고 있다. 본 논문에서는 이러한 웹 기반 응용에 대한 실현을 실험해보기 위해, 온라인 기반의 상용지도를 이용해 AIS 정보를 확인할 수 있는 디스플레이 시스템을 구현해 보았다. AIS수신 메시지 분석을 통해 주변 선박 정보를 분류하고, 상용지도는 구글 맵을 사용했으며, 디스플레이 처리를 위해서는 차세대 웹 표준인 HTML5 기술을 이용하였다.