이 연구는 2경간 연속 PSC-Beam 교량의 경간 내측 지지점의 바닥판에서 발생할 수 있는 균열의 제어에 관한 내용을 다루고 있다. PSC-Beam 교량은 주형인 PSC-Beam을 거치시킨후 바닥판을 현장타설 콘크리트로 시공된다. 이로 인하여 주형 콘크리트와 바닥판 콘크리트의 시간의존적 거동차이, 주형의 연속화에 따른 거동 등에 의하여 부모멘트가 가장 크게 걸리는 지점부에서 균열이 쉽게 발생된다. 따라서 이 논문에서는 2경간 연속 PSC-Beam 교량의 연속화에 따른 거동을 수치적 방법으로 해석하여 지점부 바닥판의 균열거동이 예측되었다. 이를 위하여 해석모델에는 콘크리트의 시간의존적 현상인 크리프와 건조수축이 고려되었으며, 2경간 연속 PSC-Beam 교량의 거동에 영향을 나타내는 여러 가지 인자가 고려되어 해석되었다. 끝으로 콘크리트의 모델식을 이용하여 지점부 균열을 억제하기 위한 현장에서 관리가능한 방안이 수치적으로 제안되었다.

PSC girder bridges, widely applied to bridge and railroad bridge (25 ~ 50 m), are a type of bridge that introduces compressive force in advance to the part where tensile force of concrete is generated. The tension force for introducing the compressive force by inserting the tendon into the concrete is a key element of the structural performance in the PSC. At present, however, measurement and verification of this is indirectly managed through deflection and cracking. However, it has become more necessary to develop practical evaluation methods of prestress force of PSC bridges. In this experiment, a small scale PSC beam with various curvature radii was made. Tension force monitoring with FBG sensor and EM sensor was performed on test members using 3 point flexural loading test. The measured values of the FBG sensors and the EM sensors used in the experiment were analyzed and compared with the measured values of the load cell.

PSC girder bridges, widely applied to bridge and railroad bridge (25 ~ 50 m), are a type of bridge that introduces compressive force in advance to the part where tensile force of concrete is generated. The tension force for introducing the compressive force by inserting the tendon into the concrete is a key element of the structural performance in the PSC. At present, however, measurement and verification of this is indirectly managed through deflection and cracking. However, it has become more necessary to develop practical evaluation methods of prestress force of PSC bridges. In this experiment, a small scale PSC beam with various curvature radii was made. Tension force monitoring with FBG sensor and EM sensor was performed on test members using 3 point flexural loading test. The measured values of the FBG sensors and the EM sensors used in the experiment were analyzed and compared with the measured values of the load cell.

The objective of this project is to develop FEM or Frame models which can be used to compute the dynamic behavior of PC girder bridge associated with the change of tension force in tendons, to overcome the limitation of general structure analysis program.

In this study, we conducted Life-Cycle Reliability Analysis Classified by Structure Movements in Removal PSC Beam Bridge. in short, we secured experimental values of bridge design factor and perform a detailed behavior analysis of structure system. finally, we could accomplish an Life-Cycle Reliability Analysis with considering of an environmental factor and variability of loading. We defined limit state function by statistical method (Response Surface Method, RSM) and calculated confidence indicator and Probability of Failure using reliability interpretation technique(FORM). eventually, we could compute Performance Profile and compare deterioration form according to time history by structure movements.

Although PSC girder bridges are widely applied to highway bridge, cross beams are considered as secondary member, not primary. Using simplified and/or experimental formula, five equi-spaced cross beams are conventionally designed in the field depending on standard drawings. Since structural damages are found frequently in the connection between girder and cross beam under traffic loads, the number of cross beams are reported to decrease in design of railway bridge like highway bridge. This study presents the possibility or applicability to decrease the number of cross beams of PSC girder railway bridge.

노후화된 PSC Beam 교량은 개선된 보강방안이 필요하다. 본 연구에서는 성능저하가 발생된 노후 PSC Beam 교량을 대상으로 PSC Beam 교량의 보강형을 폐단면 박스형태로 변환하여 이차합성 구조화함으로써, PSC Beam 교량의 강성을 안정적으로 증가시킬 수 있는 박스형 보강방안을 제안하였다. 제안된 보강방안과 기존의 외부프리스트레스 도입공법을 결합하여 보강할 경우, 보강효과를 정량적으로 규명하기 위해 시공단계해석에 따른 시간 의존적 정밀해석을 수행하였다. 성능개선을 위해 제안된 박스형 보강방안 적용 시 보강방법에 따라 전단면 및 휨 보강과 같은 다양한 형태의 보강방안을 제시한 후, 각각의 보강방안에 대해 이차합성 효과에 따른 상향캠버 및 부재응력 특성을 평가하였다. 또한 내하력 평가를 수행하여 내하율을 검토함으로서, 개선된 PSC Beam 교량의 구조 안전성을 정량적으로 평가하였다.