Anchors used in concrete structures are classified into cast-in-place anchors and post-installed anchors. At post-installed anchors, the effective embedment depth, measured from the concrete surface to the deepest point, is an important variable to grasp the performance of anchors. Because effective embedment depth is depth to transmit force to the concrete. In this study, we conducted pull-out test of M12 and M16 post-installed anchors, evaluated the performance of anchors.

Anchors used in concrete structures are classified into cast-in-place anchors and post-installed anchors. At post-installed anchors, the effective embedment depth, measured from the concrete surface to the deepest point, is an important variable to grasp the performance of anchors. Because effective embedment depth is depth to transmit force to the concrete. In this study, we conducted pull-out test of M12 and M16 post-installed anchors, evaluated the performance of anchors.

In case of Enlargement method using Post-installed Anchors, mechanical expansion anchors were resisting tensile and shear force of Modular extension structure in exist building. The purpose of this study is to investigate strength of Post-installed Anchor on 16 MPa low strength Concrete under less than standard effective depth(hef). The fracture pattern of the specimens in Pull-out tests was pull-out failure and concrete break out failure. In monotonic load shear tests the fracture pattern was steel failure of anchor and concrete break out failure.

In case of Enlargement method using Post-installed Anchors, mechanical expansion anchors were resisting tensile and shear force of Modular extension structure in exist building. The purpose of this study is to investigate strength of Post-installed Anchor on 16 MPa low strength Concrete under less than standard effective depth(hef). The fracture pattern of the specimens in Pull-out tests was pull-out failure and the strength showed 19% less than that of the design strength on test anchor manufacturer. In cyclic load shear tests the fracture pattern was steel failure of anchor and the strength showed 10% less value than that.

최근 토목구조물의 보수. 보강 및 리모델링시 구조부재를 부착시키거나 고정하는데 있어서 시공의 유연성 및 용이성으로 후설치 앵커의사용량이 증가하고 있는 실정이지만 현재 우리나라에서는 설계자와 시공자가 신뢰할 수 있는 명확한 설계기준이 없는 상태로서 외국의 설계기준에 의존하고 있는 실정이다. 무근콘크리트에 매입된 앵커에 인발하중이 작용할 때 앵커의 다양한 파괴모드는 콘크리트 파괴, 쪼갬파괴, 강재파괴, 뽑힘파괴 및 측면파괴가 발생한다. 이것은 강재의 인장 강도, 콘크리트 강도, 매입 깊이, 앵커 간격, 연단거리와 인접 앵커의존재에 따라 달라진다. 본 연구에서는 매입깊이, 앵커간격 및 연단거리를 변수로 한 후설치 콘크리트 세트앵커의 인발파괴실험을 통하여무근콘크리트에 매입된 후설치 세트앵커의 인발거동에 미치는 영향을 규명하는 것을 그 목적으로 한다.

In this study, performance of the post-installed anchor system was evaluated with reduced strength of concrete and anchor. One of the post-installed anchors was selected to performance evaluation. Concrete strength was reduced by freeze-thawing test, and the post-installed anchor strength was reduced by corrosion test. The post-installed Anchor was installed in concrete of freezing and thawing and original concrete, and corroded anchor was installed in original concrete only. Anchor diameter and installation depth of the anchor were the variable for each specimen. Performance of post-installed anchor system of each specimen was evaluated by pullout test. Anchor diameter and installation depth of anchor, it may affect the performance of the post-installed anchor system from the experimental test results. Fracture mode of each post-installed anchor system had occurred differently depending on the durability of concrete and anchor. The anchor pullout strength from the experimental test results was used in order to compare with the results of CCD (Concrete Capacity Design) method, and CCD equation was modified. Modified equation was able to predict the anchor pullout strength of post-installed anchor system in Original concrete and freezing and thawing of concrete.