Recently, researches on FRP bars have been carried out as a solution to improve the durability of reinforcing steel bars. In the study, an experimental program was conducted to evaluate the development performance of GFRP bars for SFRC beams. Specimens were failed by splitting fracture. The development performance by the center lap joint was larger than the development of end of beam. As the lap length increased, the development performance was increased but not proportional.

The aim of this study is a large amount use of recycled aggregates. The considering recycled aggregates replacement ratio is 50% that of natural aggregates. In order to increase the shear capacity of beams, that may be weaken by use of recycled aggregates, steel fibers are reinforced. The main variables are steel fiber volume fractions such as 0%, 0.5%, 0.75% and 1.0%. After the test, it could confirm that the strength and deformation capacity of beams with the steel fiber content values of 0.5% and 0.75% are comprehensively enhanced compared to non reinforcement. After evaluating the shear strength by using shear strength equations of previous researches, it concluded that the strength equation of Oh et al. (2008) is able to predict the shear strength of SFRC beams on the safety side.

본 연구의 목적은 고강도 SFRC 보의 강섬유 보강효과를 평가하기 위한 것이다. 이를 위하여 13개의 실험체를 제작하여 성능실험을 실시하였다. 실험 변수는 전단경간비, 강섬유 혼입률, 전단보강근비이며 콘크리트 강도는 60 MPa이다. 기존 연구결과와 재료 및 부재 실험결과에 대한 분석에 의하면, 전단경간비 2.5와 강섬유 혼입률 1.0%인 경우가 강섬유 보강효과가 최대로 발휘되는 것으로 평가되었다. 강섬유 보강 및 전단경간비를 고려한 기존 전단내력식은 고강도 SFRC보의 내력을 과소평가하는 것으로 평가되었다. 향후 고강도 SFRC 보의 강도특성에 대한 보완 연구가 필요한 것으로 판단된다.

This experimental study was performed to investigate the effect of the aspect ratios and volume contents of hooked steel fiber for flexural tensile strength of SFRC with compressive strength of 60MPa. The notched steel fiber reinforced concrete beams with different aspect ratios and fiber volume content were tested under 3-point bending. and the flexural tensile strength, and CMOD were obtained from the experimental data. The result showed that the strength and ductility of SFRC were generally increse as the content of steel fiber was incresed.