In the present study, numerical analysis algorithm for the hull form optimization was taken into account using optimization algorithm. In this algorithm the sequential quadratic programming method was applied as an optimizer and the potential-based panel method was adopted to get the wave resistance coefficient as the objective function. The hull form was modified using the B-spline surface modeling technique during the whole optimization process. The developed numerical analysis algorithm was applied to a passenger ship and the optimized ship were compared with the original ship.

In the present study, numerical analysis algorithm for the hull form optimization was taken into account using optimization algorithm. In this algorithm the sequential quadratic programming method was applied as an optimizer and the potential-based panel method was adopted to get the wave resistance coefficient as the objective function. The hull form was modified using the B-spline surface modeling technique during the whole optimization process. The developed numerical analysis algorithm was applied to the 300K VLCC and the optimized ship were compared with the original ship.

In this paper a study on prediction of the wave resistance performance of a very large crude oil carrier(300K VLCC) was taken into account according to the changes in L/B/T. The wave resistance of the ship was calculated using the potential based panel method in which exact nonlinear free surface boundary conditions and the trim and sinkage were considered. The panel cutting method were implemented to generate the hull surface panel and the free surface panel were generated using the variable free surface method. The numerical analysis was carried out according to the 12 different ships. The wave resistance coefficients and the wave patterns of the 12 different ships were compared with each other. As a result the wave resistance of a ship was found to be significantly affected in L/B than T.

본 연구의 주목적은 쌍동선형의 조파저항성능을 평가할 수 있는 수치해석 프로그램을 개발하는 것이다. 개발된 프로그램을 이용하여 비대칭과 대칭인 단동선형을 가진 서로 다른 두 가지 쌍동선에 대하여 수치계산을 수행하여 저항성능을 평가 하였다. 타당성 검증을 위해서 수치해석 결과 중 선수와 선미에서의 침하량, 트림 그리고 조파저항 계수를 수조모형시험 결과와 비교하였다. 이러한 비대칭 그리고 대칭 선형이 가지는 쌍동선의 유체역학적 특성에 관한 비교분석 자료는 향후 선형개발 시 충분한 활용 가치가 있다고 판단된다.

In the present study, numerical algorithms for a high-speed planing ship were taken into account. The Rankine source panel method was applied to predict a flow phenomena around a ship. The Kelvin type free surface boundary condition and the exact nonlinear free surface boundary condition were compared to predict the wave system generated by the ship and the trim and sinkage state of the ship also were introduced. In order to deal with complex geometries of the planing ship the panel cutting method was adopted. The developed numerical analysis algorithm were applied to the R/V Athena ship and the numerical results were compared with the experimental results.

This study develops an efficient numerical algorithm to predict wave-resistance performance of a catamaran hull. The developed numerical algorithm is applied to evaluate wave-resistance performance for two different twin hull forms with a asymmetric and a symmetric mono hull. Numerical calculations and model tests are compared to validate a developed numerical algorithm adopted in the current work. Comparisons are carried out through the sinkage at the bow and stern, the trim and the wave-making resistance coefficient. Model test is performed in order to verify the numerical results. The comparative analysis study regarding hydrodynamic characteristic of different twin hull forms is worthy of application in the catamaran hull form development stage.

본 연구에서는 개발된 선미부에 수직날개를 부착한 선박의 조파저항성능을 예측할 수 있는 수치해석기법의 검증에 관한 것이다. 수치해석기법은 비점성 유동장 해석기법인 랜킨소오스 패널법과 와류격자법을 사용하여 개발하였으며, 자유수면 경계조건의 비선형성은 반복해법을 사용하여 만족시켰고, 선박의 트림과 침하량을 구하는 알고리즘을 포함하고 있다. 수치해석을 위한 선체표면의 패널을 생성하기 위하여 패널절단법을 사용하였다. 4000TEU 컨테이너 운반선을 대상 선박으로 하여 선미부 6개소의 서로 다른 위치에 수직날개를 부착하여 수치해석을 수행하였으며, 수치해석기법의 타당성을 검증하기 위하여 상용 점성 유동장 해석 프로그램인 FLUENT를 사용하여 선체 주위의 점성 유동장을 계산하였고, 모형시험을 수행하여 얻은 실험 결과를 수치해석 결과와 서로 비교하였다.

최적화기법과 선형변환 자동화기법을 도입하여 고속 중형 Ro-Pax선박의 조파저항성능을 향상시킬 수 있는 선형설계방법에 대하여 연구하였다. 최적화기법으로는 SQP(sequential quadratic programming)을 적용하였으며, 선형변환 자동화기법으로는 NURBS(Non-Uniform Rational B-Spline)기법을 적용하였다. 목적함수인 선박의 조파저항성능을 예측하기 위하여 비선형 자유수면 경계조건과 선체의 침하량을 고려한 비점성 유동 해석 기법인 패널법을 적용하였다. 기준선형에 대하여 선형최적화를 수행하였으며 그 결과로 도출된 최적선형에 대하여 모형선을 제작하여 모형시험을 수행하였다. 기준선형과 최적선형에 대한 수치해석을 수행하여 얻은 결과와 최적선형에 대한 모형시험을 수행하여 얻은 결과를 서로 비교하였다.