The purpose of this study is to analyze the body type characteristics of tall adult men aged 20 to 69 years to present base material on body dimensions for men’s clothing companies. The research method comprised statistical analysis of 3D measurements after selecting items from the 8th Korean human body size survey related to the torso body types of 495 adult men who were at least 178cm tall. As a result, six factors were extracted, and the total explanatory variable of the entire factor was shown to be 80.499%. As a result of cluster analysis using this as an independent variable, three types were derived: Type 1, “a normal body type with an oval cross-sectional shape” (37.6%), with a larger vertical size and an oval chest cross-sectional shape compared to other types; Type 2: a “cylindrical thick body shape” (31.1%), which is the first stage of BMI obesity, with narrow shoulders and a cylindrical shape with a round cross-section; Type 3, “a body shape with broad shoulders and developed chest parts” (31.3%), with a horizontal size similar to Type 2 above the waist, but similar to Type 1 below. The results of this study are expected to be used as a basis for a clothing dimension system and clothing development for tall men reflecting the characteristics of the torso.

The aim of this study was to develop a body type suitable for adult men aged from their 20s to their 40s and to present a method of drafting related patterns. To this end, the somatic surface pattern data from previous studies were used. The research method involved drafting torso patterns for each type by setting and distributing the ease to the somatic surface pattern. Appearance evaluation was performed with virtual clothing. Then, the torso pattern for each body type was completed and presented as a draft method. SPSS was used for data analysis in this study. The research results are as follows. Types 1, 2, and 3 were set to 7%, 6%, 5%; 7%, 6%, 4%; and 6.5%, 7%, and 6% for chest, waist, and hip circumference measurements, respectively. The ratio of front to back was 50%:50%, 50%:50%, and 50%:50% of the spare for each body part for Type 1; 70%:30%, 50%:50%, and 60%:40% for Type 2, and 60%:40%, 70%:30%, and 60%:40% for Type 3. A tight-fit torso pattern for each body type suitable for adult males in their 20s to 40s was drafted, which was modified and supplemented through the evaluation of the first and second virtual wear. Considering the practicality of this approach, for generalization of the patterns, the items of the pattern were converted into a drafting method and presented as a draft method.

This study is based on a representative body shape drawn from previous studies that classify adult male torso shapes. In this study, a design method is proposed by developing a tight-fit pattern that can be easily developed into various items and designs using the body surface development figure. This is obtained by converting the 3D body shape of the model representing the representative body shape. The specific design method was conducted as follows. Actual measurement values were used for waist back length, waist-to-hip length, shoulder length. The scye depth was determined as C/4–1.7 cm, and the front and back Interscye was set at (1/2 × actual measurements)–0.2 cm. The front-back neck breadth was set to (1/5 × base neck circumference)–1.3 cm and (1/5 × base neck circumference) cm. The front-back neck depth was set to (1/5 × base neck circumference)–1.2 cm and 3.5 cm. Front chest circumference was C/4–1 (front-back difference)cm; (1/4 × back chest circumference) was C/4 + 1 (front-back difference) + 0.3 (dart amount) cm. Front waist circumference was W/4–0.2 (front-back difference) + 2.2 (dart amount) cm; back waist circumference was W/4 + 0.2 (front-back difference) + 2.5 (dartamount) cm; front hip circumference was H/4 + 0.2 (ease) + 0.2 (front-back difference) cm; and back hip circumference was H/4 + 0.2 (ease)–0.2 (front-back difference) cm; Front droop was 1.6 cm. The newly developed tight-fit pattern is expected to be of great use as a basis for garment construction.

최근 들어 하우스재배 감귤을 중심으로 발생이 증가하고 있는 귤애가루깍지벌레에 대해 효율적인 발생예찰과 함께 방제시기를 결정하기 위하여 합성 성페로몬을 이용하여 시기별 발생특성을 조사하였다. 귤애가루깍지벌레의 수컷 성충은 합성 성페로몬뿐만 아니라 색에도 반응하였다. 성페로몬의 농도는 5.0 mg까지 농도가 증가할수록 유인력이 높았다. 귤애가루깍지벌레 수컷 성충은 연 4회 발생되고 있었으며, 월동 후 수컷 성충이 처음 발생되기 시작하는 시기는 4월 중하순이었다. 수컷 성충발생이 가장 많은 시기는 제 1세대 발생기인 7월 상중순이었다. 성페로몬트 랩에 유인된 귤애가루깍지벌레 수컷 성충은 한 세대 내에서 3회의 발생성기가 나타났으며, 이는 귤애가루깍지벌레가 1~3령 약충으로 월동하기 때문인 것으로 추정되었다. 트랩에 유인된 수컷 성충의 밀도와 나무의 가지당 평균밀도와는 높은 정(+)의 상관을 갖고 있었다. 수컷 성충의 최대 유인시기를 이용하여 1령 약충 발생 시기를 추정할 수 있었으며, 그 적산온도는 산란전 기간과 비슷한 350DD이었다.