The printing of nanomaterials onto certain substrates is one of the key technologies behind high-speed interconnection and high-performance electronic devices. For the printing of next-generation electronic devices, a printing process which can be applied to a flexible substrate is needed. A printing process on a flexible substrate requires a lowtemperature, non-vacuum process due to the physical properties of the substrate. In this study, we obtained well-ordered Ag nanowires using modified gravure printing techniques. Ag nanowires are synthesized by a silver nitrate (AgNO3) reduction process in an ethylene glycol solution. Ag nanowires were well aligned by hydrodynamic force on a micro-engraved Si substrate. With the three-dimensional structure of polydimethylsiloxane (PDMS), which has an inverse morphology relative to the micro-engraved Si substrate, the sub-micron alignment of Ag nanowires is possible. This technique can solve the performance problems associated with conventional organic materials. Also, given that this technique enables large-area printing, it has great applicability not only as a next-generation printing technology but also in a range of other fields.

This paper discusses the hydrodynamic characteristics of a catamaran at low speed. In this study, the Delft 372 catamaran model was selected as the target hull to analyze the hydrodynamic characteristics by using the RANS (Reynold-Averaged Navier-Stokes) numerical method. First, the turbulence study and mesh independent study were conducted to select the appropriate method for numerical calculation. The numerical method for the CFD (Computational Fluid Dynamic) calculation was verified by comparing the hydrodynamic force with that obtained experimentally at high speed condition and it rendered a good agreement. Second, the virtual captive model test for a catamaran at low speed was conducted using the verified method. The drift test with drift angle 0-180 degrees was performed and the resulting hydrodynamic forces were compared with the trends of other ship types. Also, the pure rotating test and yaw rotating test proposed by Takashina, (1986) were conducted. The Fourier coefficients obtained from the measured hydrodynamic force were compared with those of other ship types. Conversely, pure sway test and pure yaw test also were simulated to obtain added mass coefficients. By analyzing these results, the hydrodynamic coefficients of the catamaran at low speed were estimated. Finally, the maneuvering simulation in low speed conditions was performed by using the estimated hydrodynamic coefficients.

제한수역에서 측벽부근을 대형선박이 항행할 경우, 측벽으로 인하여 발생하는 유체력이 대형선박의 조종운동에 상당히 크게 영향을 미친다는 것은 잘 알려져 있다. 이 논문에서는 방파제형상을 하고 있는 측벽 부근을 대형선박이 항행하는 경우, 선박과 방파제 형상간의 간섭력 추정을 위해 세장체 이론을 토대로 한 계산 방법을 적용하였으며, 선박에 미치는 측벽의 영향을 파악하기 위하여 방파제길이, 방파제와 선박간의 거리 및 수심을 변수로 하여 선박과 측벽과의 간섭력을 수치 계산하였다.

선박의 조종성능 향상을 위해 적용되고 있는 쌍동타의 유체력 평가를 위해 Re=1.5×104에서 쌍동타의 상 하부 러더 간격을 변화시켜 쌍동타 주위 유동을 계측하였다. 영각의 변화에 따른 쌍동타 주위에서 생성되는 와의 생성과 소멸 메커니즘을 이해하기 위해 속도 및 에너지 분포를 2-프레임 그레이레벨 상호상관 PIV기법을 이용하여 비교 분석하였다. 쌍동타의 상 하부 러더 간격 L=0.75C에서 물리적 한계영역으로 정의되었다.

Manta형 무인잠수정(MUUTV)을 대상으로 회류수조에서의 모형실험을 통해 동일한 동체 모형에 대해 형상이 서로 다른 부가물을 부착했을 때의 동유체력 특성을 실험적으로 검토하였으며, 동유체력 측정 결과를 이론계산치와 비교하였다. 아울러 이를 바탕으로 운동안정성을 검토하여 최적의 부가물 형상 결정의 이론적 근거를 확립하였다.