Outdoor air pollution with particulate matter has become more severe in Korea. Ambient particle concentration affects the indoor environment through various routes through building envelopes. In this study, we investigated particle exposure in residential buildings. Indoor and outdoor particle sources determined the indoor concentrations and particle exposure. This paper measured indoor particles and CO2 concentrations in two different apartment buildings and conducted the survey for 24 hours. The I/O ratio of the occupant awake period was higher than the asleep period. The I/O ratio in the awake period is 0.93-3.65, while the I/O ratio in the asleep period is 0.31- 0.76.Indoor peak events such as cooking or cleaning temporarily increase the I/O ratio and emit the indoor particle sources. Decay rate constant is 0.49-6.84 (1/h) in the indoor peak events during the operation of the exhaust hood and natural ventilation. The size range of 0.3-0.5 μm size is over half for the proportions of emitted particles (55.6%). Daily exposure is divided into indoor sources (45.2%) and outdoor sources (54.8%). We found the differences for the proportion of particle exposure. The ratio of daily exposure in particles for 0.3-0.5 μm size is 43.1 (indoor)/ 56.9 (outdoor) %. However, indoor sources are higher than outdoor sources for the ratio of daily exposure in particles for the 0.5-10.0 μm size.

Indoor air quality can be affected by indoor sources, ventilation, decay and outdoor levels. Although technologies exist to measure these factors, direct measurements are often difficult. Toluene and nitrogen dioxide (NO₂) concentrations of residential indoor and outdoor were simultaneously measured and compared in 16 houses, using passive samplers during every 3 days for 60 days. Concentrations of toluene and NO₂ were analyzed by gas chromatography and spectrophotometer, respectively. Using a mass balance model, penetration factor (ventilation rate divided by sum of ventilation rate and deposition constant) and source generation factor (source generation rate divided by sum of ventilation rate and deposition constant) were calculated by multiple indoor and outdoor measurements. The mean contributions of toluene of indoor and outdoor sources on residential indoor air quality were estimated to be 31.01% and 67.00%, respectively. On the other hand, mean contributions of NO₂ were 58.93% and 41.06%, respectively. These results could be explained that contributions of indoor and outdoor air pollutants sources are different to residential indoor air concentrations. In conclusion, contributions of outdoor air and indoor sources affecting indoor air quality were effectively characterized using multiple indoor and outdoor measurements.

Exposure to nitrogen dioxide (NO₂) can produce adverse health effects. Various indoor and outdoor combustion sources make NO₂ the most ubiquitous pollutant in the indoor environment. Indoor air quality can be affected by indoor sources, ventilation, decay and outdoor levels. Although technologies exist to measure these factors, direct measurements are often difficult. In the present paper, we used a mass balance model and regression analysis, penetration factor (ventilation rate divided by the sum of ventilation rate and deposition constant) and source strength factor (source strength divided by the sum of ventilation rate and deposition constant) were calculated using multiple indoor and outdoor measurements with 10 houses. Subsequently, mean contributions of indoor and outdoor sources were 28.86% and 81.09%, respectively, suggesting that both indoor and outdoor sources had contributions to indoor concentrations of NO₂.