In this study, we learned about the effects of indoor radon concentration reduction associated with the operation of a mechanical ventilation system at an apartment house. The experimental parameters were mainly the indoor radon level and air change rate, which were controlled by the amount of emissions released and fan motor speed. Even at the high level of radon diffused in an apartment house, indoor radon concentrations converged to the Korean national guideline level within 3 to 4 hours when the air was ventilated at 0.5 ACH and 0.7 ACH. In the case of 0.3 ACH, however, where the degree of ventilation was insufficient compared to the legal air change rate, the high concentration indoor radon could not be sufficiently removed even if the mechanical ventilation system was operated for more than 14 hours continuously. When the indoor radon level was high, the reduction rate was 34.3% for 0.3 ACH, 70.4% for 0.5 ACH, and 69.7% for 0.7 ACH at 6 hours-operation, while at the medium-level, indoor radon can be reduced by 46.2% (0.3 ACH) to 73.2% (0.7 ACH). Depending on the indoor concentration range, it may be required to secure a ventilation rate of 0.5 ACH or more at all times. In addition, in apartment houses with excellent airtight performance, even if indoor radon is at a level similar to the national guideline, it is difficult to expect a reduction in the concentration due to natural decay. Therefore, it is desirable to lower the indoor concentrations as much as possible.

This study was designed to verify what effect the use of a natural ventilation system can have on improving indoor air quality with regard to radon in various concentration ranges in an apartment house. The results show that both high (2~3 times higher than 148 m3) and low (similar to 148 Bq/m3) levels of indoor radon concentrations can be reduced close to and/or below the Korean IAQ guideline within 6 hours when the natural ventilation system is operated at approximately an air change rate of 0.5. In the case of an air change rate of 0.3, however, the indoor radon levels cannot meet the national guidelines and the reduction effect was insufficient with regard to various radon concentrations. Typically, the air change rate of a natural ventilation system is affected by meteorological factors such as temperature, relative humidity, wind speed, pressure. Its effectiveness varies according to such factors, for that reason, the reduction effects on radon did not increase proportionally with the ventilation time in this study.

The cooking-generated particles are major indoor sources of air pollution. Recently, the performance of the range hood is focused on particle removal performance. Range hood with an auxiliary air supply system can improve the fine and ultrafine particles removal efficiency by making a supply air during cooking activities. The particles were measured in the experimental building by varying ventilation types. Only operating range hood during the cooking activities was not enough to reduce the cooking-generated particles. Despite operating range hood systems, fine and ultrafine particle concentrations were maintained when cooking was finished. The range hood with a make-up air supply system can reduce the indoor particle concentration below background conditions when those systems were operated after cooking. In this study, the assessment of cooking-generated particle removal efficiency of the range hood with an auxiliary air supply system was conducted. The removal efficiency of ultrafine particles showed trends similar to the removal efficiency of fine particles.

Outdoor air pollution with particulate matter has become more severe in Korea. Ambient particle concentration affects the indoor environment through various routes through building envelopes. In this study, we investigated particle exposure in residential buildings. Indoor and outdoor particle sources determined the indoor concentrations and particle exposure. This paper measured indoor particles and CO2 concentrations in two different apartment buildings and conducted the survey for 24 hours. The I/O ratio of the occupant awake period was higher than the asleep period. The I/O ratio in the awake period is 0.93-3.65, while the I/O ratio in the asleep period is 0.31- 0.76.Indoor peak events such as cooking or cleaning temporarily increase the I/O ratio and emit the indoor particle sources. Decay rate constant is 0.49-6.84 (1/h) in the indoor peak events during the operation of the exhaust hood and natural ventilation. The size range of 0.3-0.5 μm size is over half for the proportions of emitted particles (55.6%). Daily exposure is divided into indoor sources (45.2%) and outdoor sources (54.8%). We found the differences for the proportion of particle exposure. The ratio of daily exposure in particles for 0.3-0.5 μm size is 43.1 (indoor)/ 56.9 (outdoor) %. However, indoor sources are higher than outdoor sources for the ratio of daily exposure in particles for the 0.5-10.0 μm size.

This study was performed to assess particulate matter removal efficiency of domestic air cleaner products in a field condition. The assessment also included air cleaners with different air removal mechanisms. The particulate matter (PM2.5) removal test with a different air removal mechanism using air cleaners showed that the electrostatic precipitation technique showed better performance compared with HEPA filters and other types of systems. Its removal efficiency was almost 95% in one of our operation times in the given test condition. It was assumed that not only the type of removal system but also the individual design, supply and exhaust system, and the automatically controlled air volume are involved in the removal efficiency. With respect to the area of application, tests with air cleaners for 40 m2, 60 m2, and 80 m2 areas revealed that particulate matter removal efficiency increased with the air cleaner that had a broad area of application. However, particulate matter removal efficiency by air cleaners did not correspondingly increase with the increase of the area of application. Moreover, the installation location did not influence particulate matter removal efficiency. Our results are expected to be used as the basic information for indoor air quality improvement and prediction using air cleaners.

In this study, we investigate a seasonal underground market which is located under a semi-enclosed basement. Under such settings, there is difficulty in managing indoor air quality such as ventilation. Based on the result, we can improve the indoor air environment of the underground market. The underground market in Seoul was divided into four types according to its structural characteristics and the seasonal survey was conducted. In conclusion, we will develop a realistic improvement plan to improve the indoor air environment of the underground market by selecting the underground market through actual survey.

The world energy crisis and the universal interest in comfort buildings are not only leading the thriving Passive House and Nearly Zero Energy House strategies but also encouraging the development of higher performance HVAC systems and alternative energy sources for occupants and sensible energy consumption. However, household appliances have been used to control the indoor environment such as humidifiers, dehumidifiers and air cleaners are became popular, occupants have come to rely on these appliances heavily and are overusing energy on indoor environment manage easily and quickly. In addition, the intense air tightness of current residential buildings makes possible to reduce harmful outdoor conditions but has made the indoor environment isolated from the outdoors. As well, climate change due to global warming and the urban heat island effect have broken the natural bond between humans and the environment. As high-rise, air tight buildings have become the most common residential building type in South Korea, occupants in high-rise residential buildings inevitably lose the chances to have the natural environment by the change of season to feel the warm sunlights of spring and the dry leafy smell on an autumn breeze. In this sense, regional weather data was analysed to establish comfort residential building strategies that commune with nature and o

스마트폰을 비롯한 모바일 기기의 디스플레이 해상도는 급격히 증가하고 있다. 최근 출시된 제품들은 대부분 이백만 화소 이상인 디스플레이를 사용하고 있다. 하지만 모바일용으로 널리 사용되는 멀티미디어 영상의 해상도는 디스플레이 해상도에 비해 상대적으로 낮다. 예를 들어 T-DMB(Terrestrial Digital Multimedia Broadcasting)의 화소수는 320x240이며, 인터넷 스트리밍 동영상은 대부분 720x480이하이다. 저해상도의 영상을 고해상도 디스플레이에서 재생하기 위해서는 보간을 수행해야 하는데, 이 과정에 의해 화질이 열화 된다. 특히 영상 확대에 따른 블로킹잡음 (blocking noise)의 가시성 증가는 모바일 디스플레이의 화질 저하에 중요한 영향을 미치는 요소 중에 하나이다. 본 논문에서는 보간된 영상을 대상으로 한 블로킹 잡음 저감 방법을 제안한다. 제안하는 방법은 에지를 보존하며 블로킹 잡음을 효과적으로 저감시킨다. 또한, 간단한 사칙연산, 비트연산과 비교연산만을 사용하여 모바일 기기에서의 하드웨어 구현이 용이하다는 장점을 갖는다.

Recently, functional building materials which are made of sorption materials have been widely used as board products, inorganic paints and wall papers. These remove chemical substances(VOCs, HCHO) from indoor air by physical sorption or chemical reaction and control humidity by capillary condensation. Also these materials have been used as countermeasures to sick building syndrome (SBS). However, in case of using internal building materials, the hazardous substances affecting to indoor air quality are emitted from not only the material itself but also the subsidiary materials such as adhesives for construction. Particularly in case of wallpaper and flooring material, the amount of emission from adhesives for construction is larger than that from the material itself. Therefore, this research tried to develop a technology system that can improve the performance of adsorption, absorption and desorption of moisture including the construction process that can affect to indoor air quality. To attend this end, ‘porous securement manufacturing technology system’ and ‘porous keeping construction technology system’ are developed that can secure more micropores in the process of production and construction of inorganic paint and maintain them. Consequently the reduction performance of chemical substances(VOCs, HCHO) concentrations and the humidity control performance improved almost over 30% by the technology system of the Inorganic paint.

The aim of this study was to calculate the health risks which children were exposed to trace metals through several pathways including air, floor dust, wipe and hand wipes in elementary-schools and academies. The samples were collected at children's facilities (50 elementary-schools and 46 academies) in summer (Aug ~ Sept, 2008), winter (Dec 2008 ~ Feb, 2009) and Spring (Mar ~ Apr, 2009) periods. The lifetime Excess Cancer Risks (ECRs) were estimated for carcinogen trace elements such as As, Cd, and Cr. For carcinogens, the Excess Cancer Risk (ECR) was calculated by considering the process of deciding Cancer Potency Factor (CPF) and Age Dependent Adjust Factor (ADAF) of the data of adults. Hazard Quotients (HQs) were estimated for the non-carcinogens trace metals like Cd, Cr, Hg and Pb. The average ECRs for young children were 1×10^-9~1×10^-8 (50%th percentile) level in all facilities. Non-carcinogens did not exceed 0.1 for all subjects in all facilities. For trace metals their risk based on health risk assessment was also observed to be acceptable.

Recently, functional building materials have been developed and introduced to the market. Many building materials emit volatile organic compounds(VOCs) which have the potential to affect health and comfort, and moisture problem has a major role also being established in indoor air quality (1AQ) problems. The purpose of this study is to evaluate the performance of reduction of HCHO using the gupsum board and water vapour adsorption/desorption property for ceiling board for mock-up test room and test house. The mock-up test is conducted according environmental standard method for indoor air quality of the ministry of environment. The results of this study are as follows, the reduction of HCHO gypsum boards are showed an effect to reduce the formaldehyde(HCHO) concentration of mock-up test room and test house. The indoor humidity is also showed to be lower than the general ceiling materials, since there is increased in the absorbed indoor humidity by using a humidifier with moisture adsorption/desorption ceiling materials. In natural conditions, moisture adsorption/desorption ceiling materials is showed a higher humidity than general ceiling materials constructed in the mock-up test room. However It changes of moisture adsorption/desorption is not appeared in test house. Therefore, in case of decreasing and increasing in humidity, these materials can be offset by reduction of HCHO using the gypsum board.

This study was performed to analysis the concentration of TVOC, 5VOC and formaldehyde for building material of total 262 using 20L test chamber. The concentration of TVOC, 5VOC and formaldehyde were measured 1.001㎎/㎡･h, 43.032㎍/㎡･h, 0.012㎎/㎡･h, respectively. TVOC concentration of paint and floor covering occupied the largest concentration of the indoor building materials as 2.689㎎/㎡･h, 2.120㎎/㎡･h, respectively. 5VOC concentration of floor covering was measured 106.636㎍/㎡･h. Toulene and xylene were occupied the largest part of the 5VOC as 51.2% and 33.1%, respectively. The concentration of formaldehyde for furniture materials occupied the largest concentration of the indoor building material as 0.072㎎/㎡h.

For indoor air quality at a newly built apartment before move-in, we monitored formaldehyde and VOCs and assessed human exposure and probabilistic health risk. We selected 801 newly built apartments all over the country. The results of the research on the condition show the mean concentrations of formaldehyde 294 ㎍/㎥, 210(median) 1497㎍/㎥(maximum), benzene 6㎍/㎥, (4 and 92㎍/㎥), toluene 1003㎍/㎥(773 and 5013 ㎍/㎥), ethylbenzene 120㎍/㎥, (62 and 1192㎍/㎥), xylene 287㎍/㎥(138 and 2723㎍/㎥) and styrene 64㎍/㎥, (42 and 531㎍/㎥). Formaldehyde from carcinogen and toluene and xylene from non-carcinogen were assessed the risk for human health. The excess cancer risk of formaldehyde for human beings between carcinogens is per 1.36 of average 1000 persons. This implies that it is over a level per 1.00 of 1000 persons demanding active risk reduction. Hence, we strongly need the active reduction plan and accurate source assumption. Among a variety of factors affecting indoor air quality for householders, closing construction or density of indoor air processing additional interior construction and indoor area, indoor air quality with a variety of districts show significant. The excess cancer risk for human beings of formaldehyde between carcinogens is per 1.36 of average 1000 persons. Non-carcinogen toxicity rate for human-beings with toluene and xylene among non-carcinogens is over HQ 1 from Seoul to local area.

Recently, indoor air quality (IAQ) in workplace, residence, and schools has been one of the major concerns of people, scientists and the related public. This study was performed to investigate the characteristics of indoor air quality(IAQ) in kindergartens, elementary school, middle schools, and high schools from June 2004 to May 2005 in Korea. We measured indoor air pollutants such as PM10, CO2, formaldehyde, total bacteria colony(TBC), CO, radon, total volatile organic compounds(TVOCs), asbestos, and O3 from school classrooms. The subjects were classified by building year based on the time span of 1, 1 - 3, 3 - 5, and 5 - 10 years. The levels of pollutants and physical factor in schools were compared with standards and guidelines of indoor air quality on the Ministry of Environment, the Ministry of Health and Welfare, and the Ministry of Education, and Human Resources Development of Korea. The major results obtained from this study can be summarized as follows. Asbestos and O3 were not detected in all surveyed classrooms. However, we were able to detect CO, TBC, TVOCs, and formaldehyde in kindergartens, TBC in elementary schools, TBC, TVOCs and formaldehyde in middle schools, and formaldehyde in high schools. This study was conducted to provide a basis for the management IAQ in school. Therefore, we suggest that a national plan for the management of IAQ in school should be established through a long-term, continuous investigation for the proper assessment of IAQ in school and for the health risk assessment for student.

샤피 V-노치 충격 하중-변위 곡선으로부터 얻은 균열정지하중을 이용하여 원자로압력용기강의 균열정지파괴인성(KIa)을 예측할 수 있는 방법을 모색하고 그 타당성을 고찰하였다. 샤피충격 하중-변위 곡선으로부터 얻은 균열정지하중값의 변화는 특성온도로 보정된 지수함수의 형태로 잘 표현될 수 있었다. 특성온도 TPa=2kN은 실험적인 무연성천이온도(TNDT) 및 T41 J과 높은 상관성을 나타냈으며, 원자로압력용기강의 균열정지파괴인성을 표현하는 새로운 특성온도로 사용할 수 있을 것으로 판단되었다. 또한 균열정지하중값의 변화는 파면으로부터 측정된 안정균열길이의 변화와 매우 높은 상관성을 나타내었다. 따라서 무딘 노치를 갖는 시편에 대한 계장화샤피충격시험을 통하여 균열정지하중 및 안정균열길이를 측정하믈써 비교적 정확하게 원자로압력용기강에 대한 하한값의 파괴인성치(KIa)를 평가하는 것이 가능한 것으로 판단되었다.

산악지형이 많은 우리나라의 지형적 특성상 터널은 장대화, 대단면화 되어 가고 있으며 다양한 암반을 관통하여 시공된다. 특히 도로, 철도 터널의 시종점부는 암반 구성 조건이 상부로부터 붕적토, 풍화암, 연암 등으로 구성되며 아칭 효과(Arching Effect)를 많이 기대할 수 없어 보조, 보강 공법을 적용한다. 따라서 안정한 시공을 위해 터널 시공 전에 수치 해석을 실시하여 보강 여부, 범위를 검토한 후 실제 시공 중에 발생한 변형, 응력 등 계측 결과와 수치 해석 결과를 서로 비교 검토(Feed Back) 하는 과정이 필요하다. 본 연구에서는 비교적 얕은 토피고를 갖는 풍화암 지반의 터널 시종점부에 대한 유한요소해석(Finite Element Analysis, FEA)과 실제 시공 중에 계측한 결과를 비교하여 터널의 안정성 여부를 최종 확인하였다.

근래 들어 구조물이 대형화 및 장대화되고, 건축물의 고층화와 기둥식 구조의 증가로 인해 기초는 과거보다 상대적으로 큰 연직지지력 또는 수평지지력이 요구되고 있으며 말뚝 시공 장비의 발달과 대형화로 중,대구경 말뚝의 수요가 급격하게 증가하고 있다. 그 중에서도 PHC PILE은 국내에 도입된 이후 기존 PC PILE을 급속하게 대체하여 왔으며, 초창기에 중구경을 많이 사용하여 왔으나 차츰 대형화되어 현재는 Ø700∼1,200까지 사용하고 있는 상황이다. 본 연구과제는 실제 현장에서 적용한 대구경 PHC PILE을 시공한 사례를 중심으로 공법 특징, 장단점, 시공성 및 경제성등에 대해 연구한 내용이다.