In this study, the characteristics of wind pressure distribution on circular retractable dome roofs with a low rise-to-span ratio were analyzed under various approaching flow conditions by obtaining and analyzing wind pressures under three different turbulent boundary layers. Compared to the results of previous studies with a rise-to-span ratio of 0.1, it was confirmed that a lower rise-to-span ratio increases the reattachment length of the separated approaching flow, thereby increasing the influence of negative pressure. Additionally, it was found that wind pressures varied significantly according to the characteristics of the turbulence intensity. Based on these experimental results, a model for peak net pressure coefficients for cladding design was proposed, considering variations in turbulence intensity and height.

The objective of this study is to analysis the seismic response of 200m spanned honeycomb lattice domes under horizontal and up-down ground motion of El Centro earthquake. For the analysis of seismic response of the honeycomb lattice domes by rise/span ratio, the time history analysis is used for the estimation of the dynamic response. The low rise lattice dome is less deformed and less stressed than the high rise lattice dome for the earthquake ground motion. The 3-dimensional earthquake response is not significantly different the dynamic response of one directional ground motion. The earthquake response of domes with LRB isolation system is significantly reduced for the asymmetric vertical deformation and the horizontal and vertical accelerations.

In order to reduce the seismic response of the spatial structure, a seismic isolation system with sufficient flexibility is used. The natural period of structure with seismic isolation system got be long to avoid prominent period. In this study, The seismic response of the truss-arch structure, which is modeled in three types according to the rise-span ratio is analyzed on El-centro, Northridge and Artificial Earthquake and compared with the seismic response of the truss-arch structure with lead rubber bearing(LRB). When seismic load is applied to the truss arch with isolation system, the horizontal acceleration response of the truss arch is reduced and vertical seismic response is also reduced. The application of the seismic isolation system is effective in controlling the seismic response.

As the national income grows, there is a growing demand for buildings that require long span structures such as exhibition facilities, sports facilities, special industrial facilities, and aerospace facilities. Single-layer latticed dome is one of representative llong span structures. But single layer latticed domes are apt to occur the unstable phenomena that are called “buckling” because of the lack of strength of members and instability of structures, etc. In the previous study, the structural stability of a single-layer lattice dome was roughly grasped by a frame structural system using a ready-made steel when a self-weight and a snow load were applied to a single-layer latticed dome having a span of 300 m and a height of 75 m. However, a systematic study of a 300m single layer lattice dome with various rise-span ratios was not performed. Therefore, it is necessary to study various conditions of this structure because the researchers do not have much research data to apply to actual design. Therefore, the purpose of this study is to verify the buckling characteristics of span 300M single-layer latticed dome with rise-span ratio