Flexible electrodes, particularly paper electrodes modified with polypyrrole, have shown promise in energy-related applications. We have earlier demonstrated the usage of paper electrodes modified with polypyrrole as a flexible and suitable photoanode for photoelectrochemical water splitting (PEC). Further, modification of this electrode system with an appropriate tandem absorber system for solar fuel production is interesting in developing efficient photoanodes. In this study, we study the PEC performance of flexible polypyrrole-based paper photoanodes (PPy-PAs) by decorating them with rGO@Cu2Zn- SnS4 chalcopyrites (rGO@CZTS/PPy-PAs). The lower bandgap (~ 1.5 eV) of the rGO@CZTS/PPy-PAs system allows for efficient visible light absorption, substantially improving PEC water-splitting reactions. The rGO@CZTS/PPy-PAs exhibited an enhanced current density of ~ 13.2 mA/cm2 at 1.23 V vs RHE, ABPE of ~ 1.5%, and a hydrogen evolution rate of 177 μmoles/min/cm2. Overall, rGO@CZTS/PPy-PAs showed 2.1-fold, 1.1-fold, and 1.4-fold enhancement in photocurrent activity over PPy-PAs, CZTS/PPy-PAs, and rGO/PPy-PAs, respectively. The usability of rGO@CZTS/PPy-PAs is established in the form of stable photocurrent for more than 200 min. These findings open new possibilities for developing modified PPy PAs as flexible PEs for efficient solar-driven PEC devices and give directions on improving flexible PEs for flexible and efficient solar-driven PEC systems.

We report on the fabrication and photoelectrochemical(PEC) properties of a Cu2O thin film/ZnO nanorod array oxide p-n heterojunction structure with ZnO nanorods embedded in Cu2O thin film as an efficient photoelectrode for solardriven water splitting. A vertically oriented n-type ZnO nanorod array was first prepared on an indium-tin-oxide-coated glass substrate via a seed-mediated hydrothermal synthesis method and then a p-type Cu2O thin film was directly electrodeposited onto the vertically oriented ZnO nanorods array to form an oxide semiconductor heterostructure. The crystalline phases and morphologies of the heterojunction materials were characterized using X-ray diffraction and scanning electron microscopy as well as Raman scattering. The PEC properties of the fabricated Cu2O/ZnO p-n heterojunction photoelectrode were evaluated by photocurrent conversion efficiency measurements under white light illumination. From the observed PEC current density versus voltage (J-V) behavior, the Cu2O/ZnO photoelectrode was found to exhibit a negligible dark current and high photocurrent density, e.g., 0.77 mA/cm2 at 0.5 V vs Hg/HgCl2 in a 1 mM Na2SO4 electrolyte, revealing an effective operation of the oxide heterostructure. In particular, a significant PEC performance was observed even at an applied bias of 0 V vs Hg/ HgCl2, which made the device self-powered. The observed PEC performance was attributed to some synergistic effect of the p-n bilayer heterostructure on the formation of a built-in potential, including the light absorption and separation processes of photoinduced charge carriers.

We report facile solution processing of mesoporous hematite (α-Fe2O3) thin films for high efficiency solar-driven water splitting. Fe2O3 thin films were prepared on fluorine doped tin oxide(FTO) conducting substrates by spin coating of a precursor solution followed by annealing at 550 oC for 30 min. in air ambient. Specifically, the precursor solution was prepared by dissolving non-toxic FeCl3 as an Fe source in highly versatile dimethyl sulfoxide(DMSO) as a solvent. The as-deposited and annealed thin films were characterized for their morphological, structural and optical properties using field-emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS) and UV-Vis absorption spectroscopy. The photoelectrochemical performance of the precursor (α-FeOOH) and annealed (α-Fe2O3) films were characterized and it was found that the α-Fe2O3 film exhibited an increased photocurrent density of ~0.78 mA/cm2 at 1.23 V vs. RHE, which is about 3.4 times higher than that of the α-FeOOH films (0.23 mA/cm2 at 1.23 V vs. RHE). The improved performance can be attributed to the improved crystallinity and porosity of α-Fe2O3 thin films after annealing treatment at higher temperatures. Detailed electrical characterization was further carried out to elucidate the enhanced PEC performance of α-Fe2O3 thin films.

We report on the fabrication and characterization of a novel Cu2O/CuO heterojunction structure with CuO nanorods embedded in Cu2O thin film as an efficient photocathode for photoelectrochemical (PEC) solar water splitting. A CuO nanorod array was first prepared on an indium-tin-oxide-coated glass substrate via a seed-mediated hydrothermal synthesis method; then, a Cu2O thin film was electrodeposited onto the CuO nanorod array to form an oxide semiconductor heterostructure. The crystalline phases and morphologies of the heterojunction materials were examined using X-ray diffraction and scanning electron microscopy, as well as Raman scattering. The PEC properties of the fabricated Cu2O/CuO heterojunction photocathode were evaluated by photocurrent conversion efficiency measurements under white light illumination. From the observed PEC current density versus voltage (J-V) behavior, the Cu2O/CuO photocathode was found to exhibit negligible dark current and high photocurrent density, e.g. −1.05 mA/cm2 at −0.6 V vs. Hg/HgCl2 in 1 mM Na2SO4 electrolyte, revealing the effective operation of the oxide heterostructure. The photocurrent conversion efficiency of the Cu2O/CuO photocathode was estimated to be 1.27% at −0.6 V vs. Hg/HgCl2. Moreover, the PEC current density versus time (J-T) profile measured at −0.5 V vs. Hg/HgCl2 on the Cu2O/CuO photocathode indicated a 3-fold increase in the photocurrent density compared to that of a simple Cu2O thin film photocathode. The improved PEC performance was attributed to a certain synergistic effect of the bilayer heterostructure on the light absorption and electron-hole recombination processes.