This study deals with the vibration transmissibility of a vibration isolation device, which is composed of frictional damping and nonlinear softening springs, when its base is harmonically excited. The SCAP method, a type of averaging method, is employed to obtain steady-state responses. The vibration characteristics due to excitation of the base are investigated through the analysis of displacement transmissibility in the steady-state response. In this process, displacement transmissibility for design parameters is analyzed, and the stability of the response is also investigated. The vibration isolation effect due to frictional damping is found to be more effective in the case of the softening spring than in the case of the hardening spring. Additionally, the pattern of the jump phenomenon observed during frequency sweeping, both upward and downward, has been identified.

In this paper, the effect of a dynamic vibration absorber to suppress the response of a base excitation vibration system composed of a cubic nonlinear spring and a friction damper is investigated. And the dynamic absorber consists of a linear spring and a viscose damper. The mathematical models of these systems are governed by second order nonlinear ordinary differential equations. The response characteristics of the system are analyzed using the slowly changing phase and amplitude(SCPA) method, which is one of the averaging methods. As a function of the friction force ratio, It was obtained the locking frequency at which the relative motion starts was obtained, and the regions where the locking occurred. The displacement transmissibility was investigated according to the change of the design parameter, and the optimal design parameters could be found to minimize the displacement transmissibility.

본 연구에서는 드론을 활용한 변위계측에서 드론의 회전진동 보정을 위해 드론 내부의 가속도계를 이용하는 방법 대신에 드 론 영상 내부의 변위가 발생하지 않는 고정점을 활용한 드론의 회전진동 보정방법을 제안하고자 한다. 영상 내부의 고정점을 활용한 드론 회전진동 보정을 위한 예비 연구로서, 카메라를 고정시킨 후 타겟을 회전하여 회전각도를 측정하는 실험과 회전하는 카메라를 통 해 변위가 발생하는 모형구조물의 변위를 계측하는 실험을 통해 카메라의 회전진동이 발생하는 경우 변위 계측정확도를 검증하였다. 변위가 3mm 이하로 발생 시 카메라 진동이 발생하였을 때 계측 신뢰도가 낮은 반면, 변위가 3mm를 초과하여 발생한 경우 비교적 정 확하게 계측되었다.

Friction damping is often used as a vibration isolation medium to protect large objects from vibration. In this paper, it is modeled and analyzed a basis-excited nonlinear vibration system with friction damping using the SCPA method, which is one of the averaging methods. The displacement transmissibility and the stability of the steady state response were analyzed seperately for the linear and the non-linear spring systems. The critical frequency at which the relative motion starts was obtained as a function of the friction ratio, and the characteristics of the displacement transmissibility according to the change of the design parameters were investigated. In the case of the nonlinear spring system, the displacement transmissibilities were divided into three types and the motion characteristics were considered. In particular, there was a peculiarity that the displacement transmissibilty curve was separated at specific parameter values.