The purpose of this study was to establish the optimum experimental conditions by investigating the relationship between the nine experimental conditions using Taguchi technique. Through experiments, we found that the weight, thickness, and length of the sample were most affected by the angle at which the sample was installed, while the width had the largest influence on the sample's x-axis and the inner diameter. It was confirmed. Therefore, through this experiment, it was confirmed that the installation angle of the product had the greatest influence on the error occurrence of the product during 3D printer processing.

ABSTRACT
1. 서 론
2. 실험 장치 및 방법
    2.1 실험 장치 및 제품도
    2.2 실험조건
3. 결과 및 고찰
4. 결 론
References

• 이정원(Department of Metal Mold Design Engineering, Kongju National University) | Jung-Won Lee
• 정현석(Department Semiconductor quality measurement of Korea Polytechnic colleges) | Hyun-Suk Jung
• 이춘규(Department of Metal Mold Design Engineering, Kongju National University) | Chun-Kyu Lee Corresponding Author