간행물
한국막학회 학술발표회
- 발행기관 한국막학회
- 자료유형 학술대회
- 간기 반년간
- 수록기간 2015 ~ 2024
- 주제분류 공학 > 화학공학 공학 분류의 다른 간행물
- 십진분류KDC 570DDC 660
권호리스트/논문검색
2018년도 춘계 총회 및 학술발표회 (2018년 5월) 125건
구두 발표 MO-8
41.
2018.05
구독 인증기관·개인회원 무료
The anion exchange membrane (AEM) has a structure having a group of positively charged ions inside, and selectively permeates the anion of the electrolyte. In addition, excellent ion conductivity and chemical durability, and highly reliable electrochemical performance are required. However, commercially available AEMs have a hydrocarbon-based backbone. It is difficult to make the thin film because of low solubility. As a result, it has low ionic conductivity and high area resistivity and shows limitations in electrochemical applications. In this study, a perfluorinated ionomer-based anion exchange membrane with excellent chemical stability is prepared and shows enhanced anion conductivity in electrochemical applications.
구두 발표 MO-9
42.
2018.05
구독 인증기관·개인회원 무료
Chlor-alkali (CA) membrane process is a commercially useful process to produce valued chemicals such as chlorine, sodium hydroxide and hydrogen via salined water electrolysis using sodium ion (Na+)-selective membranes. The most important issue in CA process is to reduce high energy consumption. A plausible solution is to obtain highly Na+-conductive membranes. The representative membrane materials are chemically stable perfluorinated sulfonic acid (PFSA) ionomers such as Nafion® and Aciplex®. PFSA membranes, but it is necessary to develop alternatives to PFSA membranes. In this study, a sulfonated poly(arylene ether sulfone) copolymer membrane is radiation-grafted with a highly sulfonated poly(styrene) used as a side chain material.
구두 발표 MO-10
43.
2018.05
구독 인증기관·개인회원 무료
We report on the fabrication of a high performance reverse osmosis membrane based on a hydrophilic polyacrylonitrile support via an aromatic solvent-assisted interfacial polymerization process. The use of aromatic solvent (toluene or xylene) produced the membranes with unprecedentedly high NaCl rejection (~99.9%) and superior water flux, outperforming both the control membrane prepared using a conventional aliphatic solvent (n-hexane) and commercial membranes. The membranes fabricated using toluene or xylene had roof-like structures covering a thin and highly dense polyamide (PA) layer, which was induced by enhanced amine diffusion and the extended miscible layer resulting from the increased miscibility of aromatic solvent with water. The high performance of the membranes is attributed to thin and highly cross-linked basal PA layer.
구두 발표 MO-11
44.
2018.05
구독 인증기관·개인회원 무료
To separate olefin from paraffin efficiently, highly selective and permeable carbon molecular sieve (CMS) membrane has been employed. Especially, supported CMS membrane could offer high permeance and mechanical strength. However, it has been limited to flat or tubular type membranes despite a lower packing density due to a difficult manufacturing process of hollow fiber membrane. Thus, we have optimized the process to prepare the CMS membrane on alumina hollow fiber. To coat a defect-free thin alumina intermediate layer, the withdrawal speed during dip-coating process was varied, and the viscosity of polymer solution was controlled to form uniform layer. Then, the pyrolyzed CMS membrane was tested in propylene/propane mixture gas system as well as single component. Moreover, a long-term performance was evaluated in harsh conditions.
구두 발표 MO-12
45.
2018.05
구독 인증기관·개인회원 무료
Bromination/debromination-induced Thermal Crosslinking of 6FDA-Durene for Aggressive Gas Separations
A new method for enhancing condensable gas-induced plasticization resistance of aromatic polyimides (PIs) as well as increasing the flux of gas penetrants with negligible selectivity loss was demonstrated via a so-called bromination/debromination-induced thermal crosslinking. Our newly developed crosslinking approach essentially loosened the polymeric chain packing of 6FDA-Durene PIs by forming ethylene crosslinking bonds, while retaining its rigid PI backbone. As the degree of crosslinking increased, the permeability increased with trivial selectivity loss. As a result, outstanding separation performances for CO2/N2, CO2/CH4 and C3H6/C3H8 gas pairs have been obtained, and most importantly, a high tolerance to CO2 or C3H6 induced plasticization was observed.
포스터 발표 MP-1
46.
2018.05
구독 인증기관·개인회원 무료
본 연구의 목적은 상용화 된 DOW FILMTECTM과 Toray Chemical Korea Inc.의 폴리아마이드 기반 해수담수화 분리막을 양쪽성 이온의 특성을 지니는 화합물인 SBMA를 이용한 표면 개질 후 성능 및 특성 평가에 대한 고찰이다. 표면개질 방법으로 원자 이동 라디칼 중합(ATRP) 반응을 이용하여 진행하였으며, FT-IR, XPS 및 Contact angle 등의 표면 분석 평가를 통해서 SBMA가 분리막 표면에 합성이 되었음을 확인하였고, 성능 테스트 또한 진행하였다. SBMA가 표면에 개질 되면서 양쪽성 이온의 특성을 통해 분리막은 높아진 친수성으로 개질되기 이전 분리막 대비 해수담수화 시스템 운전시 발생 되는 큰 문제점 중 하나인 막 오염 현상을 개선 시켜 줄 것으로 판단된다.
포스터 발표 MP-2
47.
2018.05
구독 인증기관·개인회원 무료
Development of forward osmosis (FO) membranes with high salt selectivity is a essential issue to realize the FO technology. To improve salt selectivity of the FO membrane, a polyamide thin film composite FO membrane was fabricated by the interfacial polymerization method using aromatic hydrocarbon organic solvents on polyacrylonitrile (PAN) supports. The aromatic hydrocarbon organic solvent accelerated amine diffusion rate toward the organic phase and the subsequent reaction, which can improve membrane performance by fabricating a thin and highly dense basal PA layer. As a result, the prepared FO membrane showed ~1.7 times higher flux and ~4.5 times higher salt selectivity compared to HTI-CTA commercial membrane with 1.0 M NaCl draw solution and DI water feed solution in FO mode.
포스터 발표 MP-3
48.
2018.05
구독 인증기관·개인회원 무료
Chronic problems of water treatment membranes are fouling phenomena and membrane damage during the cleaning process. In this study, to solve these problems, a separation membrane in the form of a hollow fiber having excellent physical properties was produced by using the thermally induced phase separation (TIPS). The material used to make the water treatment membrane is poly(vinylidene fluoride) (PVDF). In the evaluation of the properties of the manufactured hollow fiber, citric acid which is an acidic solution and NaCl which is a basic solution were used and experiments of chemical resistance were proceed. In order to confirm the performance of hollow fiber membrane, water flux and tensile strength were measured.
포스터 발표 MP-4
49.
2018.05
구독 인증기관·개인회원 무료
Laminated graphene oxide (GO) membrane has great attention for ultrafast flux membrane with well-defined pore structure. However, laminated structure is sensitive to various factors such as functionalization, fabrication method and especially support morphology due to ultrathin thickness. Herein, we investigated surface roughness effect by controlling systematically wrinkled structure of support with ion beam treatment. Wrinkled surface of support generates free volume at interface, facilitating fast water transport, which confirmed 6.4 times enhancement on permeation of water while maintaining high rejection of all dye molecules. The tunability of nanostructure through support control can provide development for ultrathin GO membrane in water purification.
포스터 발표 MP-5
50.
2018.05
구독 인증기관·개인회원 무료
제타전위를 이용한 분리막의 막오염 개선연구와 분리막의 표면전하 분석을 통한 고분자의 개질 확인 및 치환기 확인에 대한 연구는 활발히 진행되고 있다. 제타전위(zeta potential)란 전기역학적 현상으로 발생하는 전위차를 정량화 한값을 측정하는 것을 말한다. 이러한 제타전위를 측정하기 위해서는 전기영동(electrophoresis), 전기삼투(eletrosmosis), 유동전위(streaming potential)를 측정하는 예가 있고 그중 평막은 유동전위 측정이 적합하다. 따라서, 본 연구에서는 SEBS(polystyrene-ethylene-butylene-styrene) 고분자를 개질하여 아민화된 SEBS 평막형택의 분리막을 제조하고, 제조한 아민화된 SEBS 고분자 분리막을 계면동전위 측정기 이용으로 유동전위를 측정하여 결과를 분석하였다.
포스터 발표 MP-6
51.
2018.05
구독 인증기관·개인회원 무료
최근 많은 시간을 실내에서 생활하는 현대인에게 실내 공기의 질은 매우 중요한 개념으로 자리 잡고 있으며, 이는 현재 새롭게 대두되어야 할 문제이다. 실내 공기질은 온도, 습도 등으로 결정이 된다. 따라서 현재 이러한 인자를 제어하여 실내 공기질을 개선하고 있지만, 실내 공기질 개선을 위해서는 에너지소비가 심하다는 단점이 있다. 그리하여 전열 교환을 적용한 문제를 해결하려는 방법에 대한 연구가 활발히 이루어지고 있고, 전열 교환막을 이용하여 효과적으로 제어하고자 하는 많은 연구가 이루어지고 있는 추세이다. 따라서, 본 연구에서는 전열 교환 분리막 적용을 위하여, poly(styrene-ethylene-butylene-styrene)고분자에 암모늄을 도입하여 친수성을 가지는 아민화된 SEBS 고분자를 합성 및 특성평가를 진행하였다.
포스터 발표 MP-7
52.
2018.05
구독 인증기관·개인회원 무료
현재 단백질 분리 공정에서의 큰 문제점은 공정의 시간이 길며 고비용이라는 단점을 가지고 있다. 때문에 이러한 단점의 해결방안으로 membrane을 이용한 공정이 지속적으로 연구되고 있다. 특히 최근연구에는 단백질 분리 공정에서도 단백질 크기 및 막 표면의 전하차를 이용한 분리 공정이 관심을 받으며 연구가 진행되고 있다. 본 연구는 Poly Sulfone을 이용하여 용액을 제조하여 유사크기 단백질의 분리를 위한 membrane을 제조하였다. membrane은 용액을 얇게 casting하여 증류수를 이용한 상 분리 법을 통하여 membrane을 제조하였다. 제조된 membrane의 structure을 확인하기 위해 FT-IR, H-NMR을 이용하였다. 또한, pH에 따른 전위차를 측정하여 표면의 Zeta Potential을 확인하였으며 membrane의 특성평가를 진행하였다.
포스터 발표 MP-8
53.
2018.05
구독 인증기관·개인회원 무료
수소원자는 금속 표면에 흡착하여 해리되고 금속 격자 사이를 이동해 다시 수소분자로 재결합되어 탈착할 수 있으며 이러한 과정으로 수소는 금속을 통해 투과할 수 있다. 특히 수소원자는 팔라듐에서 높은 용해도와 이동도를 보이기 때문에 우수한 수소 투과 특성을 나타낸다. 본 연구에서는 무전해 도금을 이용하여 Pd 금속을 α-Al2O3 중공사 지지체에 증착시켜 SEM&EDS 분석을 통해 Pd 코팅 특성을 확인하였다. 치밀 Pd 층을 확인하기 위한 분리막의 leak 테스트 후 고온 수소투과 실험을 통해 분리막의 수소투과특성을 확인하였다. 본 연구는 “교육부 기본연구(NRF-2017R1D1A1B03036250)”의 지원으로 수행되었습니다.
포스터 발표 MP-9
54.
2018.05
구독 인증기관·개인회원 무료
Polymer membrane-based gas separation has been attracting recent interest due to its ease of operation and low operational cost. Polyimides (PIs) are the most widely used polymers for this application due to their toughness and moderate gas separation properties. However, the gas separation performance of the current polymers, including PIs, do not meet the requirement for the industrial applications. We report herein multi-block PIM-co-PIs as novel polymer membranes for CO2 separation. Synthesis, characterization and their properties including gas separation performance of various compositions of PIM-PI block copolymer membranes will be discussed in details.
포스터 발표 MP-10
55.
2018.05
구독 인증기관·개인회원 무료
Anion exchange membrane fuel cells (AEMFCs) have been considered as a promising energy device. To make highly efficient AEMs, high ion conductivity, mechanical stabilities and alkaline stabilities are required. High ion conductivity generally accompanies poor mechanical properties, and crosslinking has been widely applied to overcome these problems. Our groups introduced novel terminally-crosslinked piperidinium-functionalized poly(arylene ether sulfone)s as a anion exchange membrane. Unlike the typical AEMs, our terminally-crosslinked membranes are expected to have high conductivity, especially at low RH conditions due to enhanced water-holding capacity, while maintaining the high chemophyscial stabilities by crosslinking. The synthesis, and properties of the prepared membranes will be discussed in detail.
포스터 발표 MP-11
56.
2018.05
구독 인증기관·개인회원 무료
One of the key components to determine polymer electrolyte membrane fuel cell (PEMFC) performances is a polymer electrolyte membrane (PEM), the representative PEM material is perfluorinated sulfonic acid (PFSA) ionomers. PFSA ionomers such as Nafion®and 3M® ionomers have been widely used as PEM materials for fuel cells owing to their excellent chemical inertness and high proton conductivity. Generally, polymeric materials are highly influenced by the membrane fabrication histories including casting solvents, thermal annealing temperature and time, when they are converted in the membrane forming process. In this study, 3M PFSA ionomer membranes were systematically prepared under different fabrication histories. Their morphological contribution on fundamental characteristics, transport behavior, and electrochemical performances were disclosed.
포스터 발표 MP-12
57.
2018.05
구독 인증기관·개인회원 무료
The anion exchange membrane fuel cells (AEMFCs) have been known to be promising eco-friendly power sources. To develop AEMFCs, the high ion conductivity, good dimensional, mechanical and alkaline stabilities are required for AEMs. However, the high conductivity generally requires high water uptake, which causes an enhanced swelling and decreased mechanical properties for the AEMs. To overcome this problem, we introduced an ionic conductor having long alkyl diammonium groups to alkyl-substituted poly(p-phenylene oxide) (PPO). Addition of this new additive increased the conductivity, mechanical and alkaline stabilities due to the molecular interaction between alkyl chains in PPO and same group of the additive. Synthesis and properties of the corresponding membranes will be discussed in detail.
포스터 발표 MP-13
58.
2018.05
구독 인증기관·개인회원 무료
Anion exchange membrane fuel cells (AEMFCs) have attracted a growing interest as an alternative for proton exchange membrane fuel cells (PEMFCs). AEMs are the most important components of AEMFCs, and it’s a great challenge to attain high ion conductivity, good dimensional, mechanical and alkaline stabilities for AEMs. We prepared poly(ether sulfone ketone)s having various hydrophilic-hydrophobic block ratios, and investigated the effect of the block composition on the chemo-physical properties of the corresponding membranes. The experimental procedures and the properties, including conductivity, morphology and stability will be discussed in detail.
포스터 발표 MP-14
59.
2018.05
구독 인증기관·개인회원 무료
본 연구에서는 해수를 유도용액으로 사용하고 하수처리수를 공급수로 사용하는 정삼투막 공정의 유기/바이오 오염물에 의한 막오염을 저감하기 위해 폴리도파민/탄소 나노 튜브 복합 분리막을 제작하였다. 분리막은 기존 계면중합반응에 탄소 나노 튜브를 첨가하여 초박형 복합 분리막을 제조한 후, 폴리도파민으로 코팅시켜 제조하였다. 제작 된 분리막은 알긴산나트륨(Sodium alginate)용액과 미생물(Pseudomonas aeruginosa PA01) 부착 실험을 통하여 수투과도와 막오염도를 평가하였다. 그 결과, 폴리도파민/탄소 나노 튜브 복합 분리막은 복합되지 않은 분리막에 비하여 높은 수투과도와 낮은 막오염 성능을 보였다.
포스터 발표 MP-15
60.
2018.05
구독 인증기관·개인회원 무료
There is a great importance in the development of anion exchange membrane fuel cells (AEMFCs) for renewable energy research. The high conductivity and alkaline stability under high pH conditions at elevated temperatures are required for AEMs. We report herein SEBS-based AEMS with different hydrophobic side chain lengths, and investigated the properties of the corresponding AEMs, including conductivity, morphology and chemophysical stabilities.
