Recently, there has been an increasing attempt to replace defect detection inspections in the manufacturing industry using deep learning techniques. However, obtaining substantial high-quality labeled data to enhance the performance of deep learning models entails economic and temporal constraints. As a solution for this problem, semi-supervised learning, using a limited amount of labeled data, has been gaining traction. This study assesses the effectiveness of semi-supervised learning in the defect detection process of manufacturing using the MixMatch algorithm. The MixMatch algorithm incorporates three dominant paradigms in the semi-supervised field: Consistency regularization, Entropy minimization, and Generic regularization. The performance of semi-supervised learning based on the MixMatch algorithm was compared with that of supervised learning using defect image data from the metal casting process. For the experiments, the ratio of labeled data was adjusted to 5%, 10%, 25%, and 50% of the total data. At a labeled data ratio of 5%, semi-supervised learning achieved a classification accuracy of 90.19%, outperforming supervised learning by approximately 22%p. At a 10% ratio, it surpassed supervised learning by around 8%p, achieving a 92.89% accuracy. These results demonstrate that semi-supervised learning can achieve significant outcomes even with a very limited amount of labeled data, suggesting its invaluable application in real-world research and industrial settings where labeled data is limited.

The purpose of this study is to analyze the effect of temperature and humidity on the measured Particulate Matter (PM) concentrations recorded by PMS5003T, a low-cost light scattering type measuring tool. A regression analysis was performed on the ratio of PM concentrations measured by the light scattering method and the beta-ray absorption method according to temperature and humidity in an outdoor environment. As the temperature decreased, the PM concentration ratio increased, and this tendency intensified below 0oC. As the humidity increased, the PM concentration ratio increased, but the effect was less than the temperature effect. The coefficients of determination for temperature and humidity were R2 = 0.325 and 0.003, respectively, and the effects of temperature and humidity on the measured values w ere formulated and compensated for. As a result of the compensation, R2, relative precision, accuracy and RMSE improved from 0.927 to 0.958, from 91.183% to 96.651%, from 31.383% to 74.058%, and from 13.517 μg/m³ to 6.690 μg/m³, respectively. Finally, results from this study indicate that the reliability of the low-cost light scattering type PM sensor can be improved by applying the temperature and humidity compensation method.

The premature failure of the universal joint connecting the drive gear box and the cooling fan caused a deterioration in serviceability and operability. Universal joint is a device that transmits engine power to a cooling fan. Internal pin breakage and shaft separation can cause secondary damage such as cooling fan malfunction and radiator damage caused by component failure. The purpose of this paper is to analyze the damage phenomenon of universal joints caused by bundles in SPVs and to improve them. In order to verify the improvement, a single part test and a system conformance test were conducted, and durability test was conducted to confirm the improvement effect on the improved prototype. Through these, the effects of increasing the durability of the improved product were estimated.

These studies were conducted to evaluate developmental competence of follicular oocyte collected from the ovaries of Hanwoo cows with the high offspring meat quality (1++ and 1+ grade). Cumulus oocyte complexes from individual cows were matured, fertilized and cultured using protocols of in-vitro maturation (IVM), in-vitro fertilization (IVF) and in-vitro culture (IVC). The rates of blastocyst development from Hanwoo cows with the offspring meat quality grades of 1++ and 1+ were 18.6 and 21.2%, respectively. The rates of blastocyst development were 26.3, 20.7, 20.7, 17.2 and 31.2% from Hanwoo cows with the meat quality grades of 1++, 1+, 1, 2 and 3, respectively. Fiftyseven transferable embryos were recovered from 11 Hanwoo donor cows (5.2/head) with the high offspring meat quality grades of 1++ and 1+ in vivo, and the pregnancy rate after embryo transfer was 61.1%. In conclusion, these results suggest that in vitro embryo production from the ovaries of cows with the high meat quality grades using individual culture system can be used an efficient method for livestock improvement. In addition, for the successful industrialization of embryo transfer, conception rate should be improved.

본 연구는 기구등에 오염된 E. coli와 S. aureus를 제어 하기 위해 이산화염소의 농도별 접촉시간에 따른 살균소 독력을 평가하여 살균예측모델을 개발하였다. E. coli의 경우 초기균수가 9.13 log CFU/mL이었고, 청정조건에서 5 ppm으로 1분, 3분, 5분 처리한 결과 각각 0.04, 0.07, 0.10 log CFU/mL의 감소값을 나타내었다. 20 ppm을 처리한 결 과 각각 0.74, 0.79, 0.84 log CFU/mL의 감소값을 나타내었다. 또한 CCD에 의한 최대농도 35 ppm으로 처리한 결과 각각 2.49, 2.70, 3.65 log CFU/mL의 감소값을 나타내었다. S. aureus의 경우 초기균수가 8.70 log CFU/mL이었고, 청정조건에서 5 ppm으로 1분, 3분, 5분 처리한 결과 각각 0.14, 0.28, 0.36 log CFU/mL의 감소값을 나타내었다. 20 ppm을 처리한 결과 각각 0.66, 0.79, 0.90 log CFU/mL의 감소값을 나타내었다. 또한 CCD에 의한 최대농도 35 ppm 으로 처리한 결과 각각 4.59, 5.25, 5.81 log CFU/mL의 감소값을 나타내었다. 따라서 이산화염소의 살균소독력 평 가결과는 E. coli와 S. aureus에 대하여 식품의약품안전처 살균소독력 기준에 모두 만족하는 것으로 나타났다. 살균 예측모델의 경우, R2값이 모두 0.98 이상으로 두 균주에 대해 모두 높은 적합성을 보였다. 본 연구에서 개발된 이산화염소의 살균예측모델을 식품산업 적용을 위한 기초자 료로 활용함으로써 E. coli와 S. aureus를 적절한 농도와 접촉시간으로 제어할 수 있을 것으로 사료된다.

Shelter that communication equipment and on-equipment material are mounted on is transported by airplane or vehicle, it has a function such as waterproof and shielding EMI. When the shelter is transported by car or helicopter, it is shocked by vibration and crash with the ground. So, three skids are attached to bottom of the shelter to reduce the shock. To confirm the durability of the structure of shelter, parallel drop and rotating drop test were done in accordance with KDS 0000-0000. However, the damage was discovered in the shelter. So, stiffening plate was added to skid and panel of partition wall to obtain durability and changed the shape of rubber buffer. In this paper, the cause of deformation and damage in the shelter was analyzed and improved shape through the structural analysis was verified.

Safety accident rate of small-medium construction site is high. because of lack of safety management system, lack of safety management capacity, lack of investment for safety, Owner's insufficient awareness about safety. In order to improve this, Currently in Occupational Safety and Health Act, Construction site of amounts more than 300 million won less than 120 billion (architectural),150 billion won(civil) mandatory subject to the technical guidance on construction accident prevention. Context of construction accident causes with construction accident rate relationship analysis and case analysis of technical guidance, through a survey of stakeholders in the technical guidance drawn the problems of the construction accident prevention technical guidance system and ways to improve on this.

The aim of this study was to determine the relationship between the coat color appearance of Korean brindle cattle and the changes of relevant hormone levels that may affect the hair pigmentation during different stages of growth and maturation. In mature cattle, levels of both ACTH and DHEA in Korean brindle cattle with brown color were significantly higher than those with black color (p<0.05). Levels of α-MSH in Korean brindle cattle with whole brindle (≧50%) color were significantly higher than those with brown color (p<0.05). In calves of Korean brindle cattle at 2 to 6 months, the concentration of estradiol was significantly higher in calves with whole brindle color than those with part brindle color (p<0.05), when the coat color was confirmed. After 6 month of coat color confirmation, levels of testosterone and ACTH increased in calves with part brindle color and were significantly higher than those with whole brindle color (p<0.05). In calves of Korean brindle cattle at 1 or 2 months, there were no significant differences in hormone levels of estradiol, ACTH, DHEA and α-MSH between the calves with brindle color and brown color, except estradiol before brindle color appearance. Changes of relevant hormone levels at different stage of growth and maturation may affect the pigmentation of coat during the development of cattle. In addition to the current study correlating the different coat colors with relevant hormone levels, investigation of the coat color associated genes expressed in Korean brindle cattle may further clarify the mechanisms of coat color changes during their development.

This research was designed to find out how imagery training program influence students' motor skills in high jump and how various teaching techniques should be applied to improve students' motor learning. To achieve the purpose of the study, ninety studen

In this study, a novel and flexible recommender system was developed, based on product taxonomy and usage patterns of users. The proposed system consists of the following four steps : (i) estimation of the product-preference matrix, (ii) construction of the product-preference matrix, (iii) estimation of the popularity and similarity levels for sought-after products, and (iv) recom- mendation of a products for the user. The product-preference matrix for each user is estimated through a linear combination of clicks, basket placements, and purchase statuses. Then the preference matrix of a particular genre is constructed by computing the ratios of the number of clicks, basket placements, and purchases of a product with respect to the total. The popularity and similarity levels of a user’s clicked product are estimated with an entropy index. Based on this information, collaborative and content-based filtering is used to recommend a product to the user. To assess the effectiveness of the proposed approach, an empirical study was conducted by constructing an experimental e-commerce site. Our results clearly showed that the proposed hybrid method is superior to conventional methods.

본 연구에서는 멸균처리공정이 없는 돈육 포장공정을 대상으로 작업장에서 직접 분리한 야생균주인 Salmonellaspp. KSC101를 작업장의 온도와 시간을 주요 변수로 하여, 이들 현장에서의 Salmonella spp. KSC101의 성장 특성을 파악하고, 이를 수학적으로 예측할 수 있는 모델을 개발하였다. 돈육포장공장 현장을 반영하여 온도는 0, 5, 10,15, 20oC로, 시간은 0, 1, 2, 3시간으로 하였으며, 0oC와5oC에서는 성장이 발생하지 않았으며, 10oC, 15oC, 20oC에서는 약간의 성장이 있었으나 증가수준은 평균 0.34 logCFU/g정도였고, 20oC에서 성장율이 더 높았으나 15oC와는 통계적으로는 유의하지 않았다(p < 0.05). 하지만 PMP와 비교시 야생균주인 Salmonella spp. KSC101의 성장이더 빠른 것으로 나타났다. 이들 실험결과를 바탕으로 1차모델은 Gompertz 4 parameter식을, 2차 모델은 Exponentialdecay식을 이용하여 성장예측모델을 개발하였으며, R2값은0.99이상으로 나타났다. 개발된 모델에 대한 검증으로RMSE를 이용하였으며, 값이 0.103으로 양(+)의 방향으로약간 초과 예측하는 것으로 나타났으나, 최종적으로 실험값과 예측값이 ± 0.5 log cfu/g 내에서 일치하고 있어, 본연구에서 개발된 모델은 추후 냉장돈육 포장공정에서 위생관리기준 설정에 대한 과학적 근거자료로 활용할 수 있을 것이다.

Currently, R&D investment of government is increased dramatically. However, the budget of the government is different depend- ing on the size of ministry and priorities, and then it is difficult to obtain consensus on the budget. They did not establish decision support systems to evaluate and execute R&D budget. In this paper, we analyze factors affecting research funds by linear regression and decision tree analysis in order to increase investment efficiency in national research project. Moreover, we suggested strategies that budget is estimated reasonably.

To address global climate change, various governments are investing in electric vehicle research and, especially in Korea, the application of electric vehicles to public transportation. The lithium batteries used in electric vehicles typically have an exp

Recently, speedy, convenient and easy detection technologies have been developed rapidly and on the contrary, studies on development of traditional detectors applying biochemical characteristics has gradually been decreased. This review examined trend in current studies on detection of food-borne pathogenic microorganisms in the fields of selective media, immuno-assay, Polymerase Chain Reaction (PCR), microarray, terahertz spectroscopy &imagination and so on. Most traditional methods to detect the organisms from food matrix rely on selective media and such a method have disadvantages like long time requirement and distinguishing one species only from each selective medium although they are highly economical. Various new convenient methods such as Enzyme Linked Immuno-sorbent Assay (ELISA), paper-strip kit, fluoroimmunoassay etc. have been developed. The most ideal method for detecting food-borne pathogenic microorganisms in foods should be accurate, convenient, rapid and economical. Additionally, it is needed that capabilities of quantitative analysis and automation to be applied to industries.

현재 살균소독제의 국가 공인시험법은 시험관 내에서 행하는 현탁액시험법으로 실제 현장의 표면 살균을 정확히 평가하기에는 무리가 있다. 본 연구는 국제적으로 표준화 되어 있는 3가지 정량적 표면시험법간의 유효성 평가력 비교를 목적으로 E. coli와 S. aureus를 대상으로 시중 유통되는 대표적 5개 계열 살균소독제의 유효성을 평가하였다. 그 결과 E. coli와 S. aureus에 대한 각 방법별 살균소독력은 ASTM(1)법에서 5.18 ± 0.03, 5.27 ± 0.04 log cfu/carrier, ASTM (2)법에서 4.63 ± 0.04, 3.97 ± 0.03 log cfu/carrier, CEN EN 13697법의 청정조건(CEN(1))에서 6.14 ± 0.05, 5.31 ± 0.10 log cfu/carrier, 오염조건(CEN(2))에서 4.37 ± 0.02, 4.06 ± 0.01 log cfu/carrier로 나타났다. CEN(1)시험법이 ASTM(2)와 CEN(2) 시험법에 비해 살균소독력이 유의적으로 높게 평가되었다. 적용된 3개의 시험법 중 유리를 담체로 사용 한 ASTM(1)법에 비해 스테인리스 스틸을 사용한 ASTM(2) 와 CEN법 적용 시 살균소독효과가 낮게 평가되었다. 결론적으로 3 가지 국가 공인시험법간 유효성 평가결과가 달랐으며, 실제 식품제조 현장에서 사용되는 표면에서의 살균 소독력을 정확히 평가하기 어렵다는 것을 확인할 수 있었다.

본 연구는 양질의 조사료를 최대한 생산하기 위해 월동 사료작물 재배기술을 보완하고 봄 파종의 가능성과 생산성을 구명하고자 수원 국립축산과학원에서 국내개발 품종을 공시하여 2009년 3월부터 6월까지 수행하였다. 처리내용은 단파 3처리 (이탈리안 라이그라스 (IRG) 조생종 Kowinearly, 중생종 Kowinmaster, 청보리 유연)와 혼파 2처리 (Kowinearly와 유연, Kowinmaster와 유연) 등 5처리였다. 생육기간 중 IRG에서 도

Currently food-borne disease is being increased at outdoor food services including hotels and restaurants. Speedy and convenient practical monitoring techniques to determine hygienic conditions are needed. This study was designed to verify correlation of direct ATP (Adenosine Tri-Phosphate) examination method using ATP bioluminescence and surveillance with check-list by inspector. Hygienic status of personal hygiene (hands), kitchen utensils (knives, chopping boards, kitchen towels, cap openers, food storage containers, and blade of slice machines), facilities and equipments (refrigerator handles, worktables, and sinks) in five major hotels in Seoul were examined. The result of personal hygiene of hotels was relatively better than other inspection items (46.6 points in personal hygiene, 40.2 points in kitchen utensils, 40.3 points in facilities & equipments). In ATP inspection, kitchen utensils and facilities & equipments were relatively clean comparing with personal hands data (40.8 ± 6.77 RLU/cm²). After correlation analysis of surveillance in hygienic status points and ATP value, all results showed negative and high correlation. The surveillance data and ATP results investigating personal hygiene, kitchen utensils and facilities & equipments were highly correlated. The ATP examination method which shows real-time identification could be considered as an appropriate method to alternate current check-list dependent safety management in food services including hotels.