고자리꽃파리는 양파 및 마늘 등 백합과 Allium 속에 속하는 농작물에 중요한 해충으로 전 세계적으로 온대지역에 서 경제적 해충으로 취급하고 있다. 본 연구에서는 기존 자료를 바탕으로 월동번데기의 성충으로 우화모델를 작성하 고 포장 실측자료와 비교하여 평가하였다. 월동번데기 발육모형으로 선형과 비선형모형을 작성하고 발육기간 분포 모형과 결합하여 예찰모형을 작성하였다. 비선형발육모형 작성시 3-매개변수 락틴모형 적용뿐만 아니라 4-매개변 수 모형의 마지막 변수 값을 선형모형의 절편값으로 대체하여 저온에서 선형성이 강화도록 변형시켰다. 성충우화 50% 예측에서 일일평균온도를 이용하는 경우 적산온도 모형을 비롯하여 발육률 적산모형(선형식 및 비선형식) 모두 실측치와 큰 차이가 있었다. 시간별온도를 입력값으로 한 경우 3-매개변수 모형을 제외한 사인곡선 적산온도 모형, 선형 발육률 적산모형, 4-매개변수 비선형 발육률 적산모형의 평균편차는 3일과 차이가 없었다. 최종적으로 선형모형 및 4-매개변수 비선형모형을 바탕으로 시간별온도자료를 이용한 발육률 적산모형은 선발하였다. 그 결과 선형 발육률 적산모형이 두 포장적합 집단(1984, 1987)에서 실측일과 편차가 3일과 차이가 없었다. 비선형 발육률 적산모형은 1984년 적합은 0.8일 편차로 정확하였으나 1987년 집단에서 평균편차가 6.5일로 다소 증가하였다.

The Japanese pine sawyer (JPS), Monochamus alternatus Hope, is an important vector of the pine wood nematode, Bursaphelenchus xylophilus (Steiner and Buhrer), which causes pine wilt disease. JPS selects a characteristic life cycle of a four- or five-instar pathway, which indicates the number of instars before pupation. In this study, we investigated the potential presence of a three-instar pathway and sought to determine the minimum larval age required for JPS to construct a pupal chamber. The results showed that no third instars made pupal chambers, suggesting that there is no three-instar pathway. The initiation time of digging the tunnel to make the pupal chamber ranged widely from Julian date 274 (30 September) to 332 (27 November). This timing became an average age stage of 4.8 instar, which equals an 80% completion of the fourth instar. Thus, the minimum larval age at which JPS constructs the tunnel to pupate the next year is estimated to be late in the fourth larval instar. Further, we discuss the diapause ecology in relation to the larval development of JPS in different thermal environments. Tentatively, we suggest that the regulation of diapause induction in JPS involves a dual process of reaching a critical developmental stage and stimulus (tentatively a cold temperature). This hypothesis will be helpful for future studies of diapause mechanisms and the selection of the instar-pathway in JPS and related species.

Here we review the genus Nycteola of the Nolidae (Lepidoptera). As the result of this study, we recognized already synonymized species N. costalis Sugi, 1959 of N. coreana (Leech, 1900) and newly recorded species N. dufayi Sugi, 1982. Whlie the number of Korean Nycteola species remain unchanged, the composition has been changed.

모기류는 흡혈을 통해 원충, 바이러스, 사상충 등 다양한 병원체를 보유하며 말라리아, 일본뇌염, 웨스트나일 열, 뎅기열 등을 사람에게 매개하는 위해성이 있는 위생해충이다. 이번 연구에서는 해외유입 모기류 감시를 위해 경남 고성지역에 설치한 스마트 고공포집기를 이용하여 2022년부터 2023년까지 모기류들을 모니터링하였다. 조사기간 동안, 총 3속 5종 43개체가 채집되었으며, 이중 삼일열 말라리아를 매개하는 Anopheles belenrae를 경남 지역에서 처음으로 발생함을 확인하였다. 본 연구는 해외유입 모기류에 대한 감시망 구축의 최초 시도로서, 고공 포집기를 활용하여 모기류 감시가 가능함을 확인하였다.

Five insecticides (Acrinathrin, Dinotefuran, Emamectin benzoate, Chlorfenapyr and fluxametamide) approved for tomato cultivation were evaluated in Frankliniella occidentalis populations collected from Chungcheong province (Cheongyang, Chungju and Gongju). Leaf dip bioassay was used to evaluate resistance levels (LC50). Bioassays on Acrinathrin demonstrated higher LC50 concentration in evaluated populations. In particular, the Chungju population was 745.61 times the recommended concentration of the insecticide. Other remarkable resistance levels were recorded for the Dinotefuran with 435.06 times and 196.29 times the recommended concentrations for the populations from Chungju and Gongju, respectively. Bioassays for Emamectin benzoate, Chlorfenapyr and Fluxametamide showed low resistance to insecticides in the evaluated populations.

Yellow flower thrips (WFT), Frankliniella occidentalis is mainly controlled using chemical control methods. But the continuous use of chemical pesticides in greenhouse may contribute to development of insecticide resistance. Therefore, in this study, we evaluated the insecticidal activity of eleven insecticides against the WFT occurring in greenhouse pepper cultivation in the Gyeonggi province. The results showed no resistance in treatments with emamectin benzoate, fluxametamide, and flometoquin while high levels of resistance were recorded in treatments with acrinathrin, acetamiprid, and dinotefuran. The Anseong and Yeoju population was more resistant against spinetoram and chlorfluazuron, respectively, than populations from other regions.

깡충거미과의 모습을 의태하여 시각적 포식자인 깡충거미로부터 자신을 보호하는 전략은 여러 나비목 곤충 에서 진화하였다. 하지만 나비목 곤충이 깡충거미 간의 의사소통 신호를 의태한다는 가설은 제안된 바 없다. 본 연구에서는 깡충거미과의 구애/영역성 행동을 의태하는 것으로 추정되는 붉은꼬마꼭지나방(Atkinsonia ignipicta)의 빗살 모양 더듬이와 추켜 올린 다리가 포식을 단념시키는 의태 신호로 작동하는지 실험적으로 검증 하였다. 깡충거미 의태라 추측되는 붉은꼬마꼭지나방의 형태적 및 행동적 특성들을 단계적으로 제외한 뒤 포식 자(흰눈썹깡충거미, Evarcha albaria)와의 조우 시 생존을 비교하였다. 연구 결과, 붉은꼬마꼭지나방은 비슷한 크기의 비-의태 나방에 비해 포식자의 공격을 덜 받았으며, 더듬이나 다리 중 하나라도 결여되었을 때 흰눈썹깡충 거미의 공격이 증가하였다. 이는 붉은꼬마꼭지나방의 더듬이와 다리 모두가 시각적 방어의 중요한 신호로 작동 한다는 것을 시사한다. 하지만 흰눈썹깡충거미가 붉은꼬마꼭지나방을 향해 구애/영역성 행동을 보이지 않았다 는 점에서 깡충거미의 낮은 공격 빈도가 같은 깡충거미 종류로 오인해서인지 다른 이유에서인지는 불투명하다. 그러나 사층깡충거미(Marpissa pulla)는 붉은꼬마꼭지나방을 상대로 영역성 행동을 잦은 빈도로 보였으며, 이는 붉은꼬마꼭지나방의 형태가 깡충거미 의태 효과를 가진다는 것을 보여준다.

최근 프리팹 부재간 비간섭 계면이음 설계기술이 도입되고 기계주입식 충진 기술의 실용화 성공으 로, 교량 프리캐스트 바닥판 시공의 저해요인이 상당히 해결될 수 있다. 이 때 프리팹 부재에 GFRP 보강근을 적용한다면 가공조립비 절감 효과가 있고, 프리팹 부재의 경량화로 경제성이 제고될 뿐 만 아니라, 현장 안전성과 작업편의성이 향상될 것으로 보인다. 기존 철근 연신율은 20% 내외 수준인데 반해 GFRP 보강근의 파괴변형율은 3% 내외이며 탄성계수는 50GPa (강재 대비 25%수준)이므로, 이 러한 재료특성 차이로 인한 휨성능에 대한 영향 평가가 필요하다. 특히 GFRP 보강근을 프리캐스트 바닥판과 거더 간 계면이음 적용에 따른 영향을 평가하기 위한 프로토타입 거더를 설계하고, 재료간 계면의 부착 특성을 고려한 유한요소해석 모델을 수립하고 극한 휨성능과 소요 계면 전단성능과의 상 관관계를 검토하였다. 추후 본 변수해석 연구에 대해 실험적 검증이 완수된다면, GFRP 보강근 설계기 술을 정립하는 데 기여할 것으로 기대된다.

Ni-CNT nanocomposites were synthesized via the electrical explosion of wire (EEW) in acetone and deionized (DI) water liquid conditions with different CNT compositions. The change in the shape and properties of the Ni-CNT nanopowders were determined based on the type of fluids and CNT compositions. In every case, the Ni nanopowder had a spherical shape and the CNT powder had a tube shape. However, the Ni-CNT nanopowders obtained in DI water exhibited irregular shapes due to the oxidation of Ni. Phase analysis also revealed the existence of nickel oxide when using DI water, as well as some unknown peaks with acetone, which may form due to the metastable phase of Ni. Magnetic properties were investigated using a Vibrating Sample Magnetometer (VSM) for all cases. Nanopowders prepared in DI water conditions had better magnetic properties than those in acetone, as evidenced by the simultaneous formation of super paramagnetic NiO peaks and ferromagnetic Ni peaks. The DI water (Ni:CNT = 1:0.3) sample revealed better magnetic results than the DI water (Ni-CNT = 1:0.5) because it had less CNT contents.

Dystocia, a challenging condition in obstetrics, can arise from various causes, including fetal monsters with structural abnormalities. This case report presents a unique case of dystocia due to a fetal monster known as Perosomus Elumbis in a beetal breed goat from Pakistan. The 4-years-old pregnant doe presented with prolonged straining and failure to deliver the fetus after 8 hours of labor. Upon examination, the cervix was dilated, and only the forelimbs of the fetus were visible in the birth canal. The subsequent delivery involved the application of manual traction by using a dystocia kit, and the removal of edematous fluid from the legs. The monster fetus exhibited absence of hair growth, along with the absence of thoracic vertebrae. Two other fetuses were present, with one found dead and the other alive. Posttreatment involved fluid therapy, antibiotics, and supportive care for the doe. This case report sheds light on the occurrence of Perosomus Elumbis fetal monsters and their impact on dystocia in goat breeding. Understanding the underlying causes and implementing appropriate management strategies are crucial for successful outcomes in similar cases.

Deep learning-based computer vision anomaly detection algorithms are widely utilized in various fields. Especially in the manufacturing industry, the difficulty in collecting abnormal data compared to normal data, and the challenge of defining all potential abnormalities in advance, have led to an increasing demand for unsupervised learning methods that rely on normal data. In this study, we conducted a comparative analysis of deep learning-based unsupervised learning algorithms that define and detect abnormalities that can occur when transparent contact lenses are immersed in liquid solution. We validated and applied the unsupervised learning algorithms used in this study to the existing anomaly detection benchmark dataset, MvTecAD. The existing anomaly detection benchmark dataset primarily consists of solid objects, whereas in our study, we compared unsupervised learning-based algorithms in experiments judging the shape and presence of lenses submerged in liquid. Among the algorithms analyzed, EfficientAD showed an AUROC and F1-score of 0.97 in image-level tests. However, the F1-score decreased to 0.18 in pixel-level tests, making it challenging to determine the locations where abnormalities occurred. Despite this, EfficientAD demonstrated excellent performance in image-level tests classifying normal and abnormal instances, suggesting that with the collection and training of large-scale data in real industrial settings, it is expected to exhibit even better performance.

The purpose of this study is to review the available literature on the effectiveness of fibers in preventing early-age shrinkage cracking on cementitious concrete. The overview describes the widely used ASTM C1579 (Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) for plastic shrinkage cracking. The past literature used crack length, width, or area to describe and quantify cracks on concrete specimens. To keep things simple, this review expresses the length, width or area as a percentage of the control specimen. Finally, the study establishes a relationship between fiber volume and aspect ratio on plastic shrinkage and compressive strength of concrete. It was concluded that fiber is sufficient enough to mitigate plastic shrinkage cracking. An increase in fiber volume and aspect ratio reduces the early-age cracking of concrete but harm its compressive strength.

In order to attract students to the radio universe, we have constructed a three-element radio interferometer in the National Youth Space Center, Goheung, Korea. It consists of three 1.8 m off-axis parabola antennas with driving systems, sideband separation receivers operating in 12 GHz, a narrow band digitizer, and correlation software. We have used as many commercial products as possible to reduce development costs. The maximum separation of 20 m gives an angular resolution of ∼4′, and the shortest baseline of 3.8 m prevents a serious missing flux. Fringes are detected for several radio sources, including the sun and Cas A. After a rough relative calibration, we have derived visibilities for the sun, whose amplitudes are decreasing for longer baselines. We have made a solar image using the visibility amplitudes and closure phases, referring to the 17 GHz image by Nobeyama Radioheliograph. Developing a flexible real-time correlator seems most crucial if this kind of the system is to be used for more rigorous scientific studies.

Background: Kinesio taping is being applied to improve ankle dorsiflexion in stroke patients. Currently, the elasticity of kinesio taping is applied in various ways. Objectives: To investigated the effect of tibialis anterior kinesio taping elasticity level on gait speed in stroke patients. Design: A randomized cross-over pilot study. Methods: A total of 12 study subjects were allowed to experience three conditions within a single group. The three conditions are strong elastic taping condition, weak elastic taping condition, and non-elastic taping condition. Study subjects were randomly assigned to each condition sequentially. For the evaluation, gait variables (cadence, gait speed, stride length) were measured 24 hours after applying the taping appropriate for each condition. Results: The strong elastic taping condition significantly increased gait variables compared to the weak elastic taping and non-elastic taping conditions (P<.05). Weak elastic taping significantly increased gait variables compared to non-elastic taping (P<.05). Conclusion: As tibialis anterior kinesio taping elasticity increased, gait variables significantly improved in stroke patients.

This work involves the development of a novel waste-derived carbon dots (CDs) conjugated with silver (Ag) nanohybrid system-based Fluorescence Resonance Energy Transfer (FRET) sensor for the detection of melamine. CDs and Ag nanoparticles served as energy donors and energy acceptors, respectively. CDs were synthesized from orange peel waste through a combined hydrothermal and ultra-sonication route. The synthesized CDs had hydroxyl, amino, and carboxyl groups on their surface, explaining that waste-derived CDs can act as reducing and stabilizing agents and showed strong absorption and fluorescence emission at 305 and 460 nm, respectively. The bandgap, linear refractive index, conduction band, and valance band potential of CDs were observed to be 2.86, 1.849, 1.14, and 4.002 eV, respectively. No significant difference was observed in the fluorescence properties at different pH (acid and alkaline) and ionic concentrations. Given their fluorescent nature, the synthesized CDs were used for the detection of melamine. The fluorescence of CDs was found to be quenched by Ag+ due to the FRET energy transfer between CDs to Ag. Notably, the zeta potential of Ag@CDs was changed from − 28.7 mV to − 30.6 mV after the incorporation of Ag+. Ag@CDs showed excellent selectivity and sensitivity toward the sensing of melamine in the aqueous solutions with the limit of detection ~ 0.85 μM. Increasing the melamine level also raises the FL intensity of Ag@CDs. The substrate was effectively used in the detection of melamine in milk as a real application and the recovery percentage was found to be 98.03%. Moreover, other adulterants such as urea and formaldehyde can be detected selectively by Ag@CDs. Overall, the synthesized Ag@CDs can be used as an efficient material for sensing applications involving such food adulterants.

Fluorine (F) recovery from wet process phosphoric acid (WPA) is essential for sustainable resource utilization and environmental protection. This work systematically investigates the F recovery mechanism by air stripping from three simulated systems: H3PO4- H2SiF6-H2O, H3PO4- HF-H2O, H3PO4- H2SiF6-HF-Al3+-H2O, and from two industrial systems: WPA and WPA-Al3+ under different stripping temperatures (60–110 ℃) and stripping times (0–120 min). The influence on the existence form of F, the content of Al3+ cations and the addition of active silica on the F removal rate in the phosphoric acid solution is studied by analyzing the changes in the contents of F, P and Si. The results indicate that the F in the form of H2SiF6 is more easily released from the phosphoric acid solution than that in the form of HF. While, the release of F is inhibited in the presence of the Al3+ in the solution due to the formation of Al-F complexes that are characterized by 19F NMR, 31Si NMR and FTIR techniques. Interestingly, the addition of active silica can promote the conversion of HF to H2SiF6 in the solution and significantly improve the release rate of F. The researching results can provide an important guidance for industrial practice of WPA.

Hybrid nanocomposites of aluminium (NHAMMCs) made from AA5052 are fabricated via stir casting route by reinforcing 12 wt% Si3N4 and 0.5 wt% of graphene for usage in aeronautical and automotive applications due to the lower density and higher strength to weight proportion. The wear characteristics of the NHAMMCs are evaluated for different axial load, rotational speed, sliding distance and sliding time based on Box-Behnken design (BBD) of response surface methodology (RSM). Orowan strengthening mechanism is identified from optical image which improves the strength of the composite. Outcomes show that with higher axial load and rotational speed, there is substantial increase in wear loss whereas with increased sliding distance and sliding time there is no considerable increase in wear loss due to the lubricating nature of the reinforced graphene particles since it has higher surface area to volume ratio. Besides, artificial intelligence approach of neuro-fuzzy (ANFIS) model is developed to predict the output responses and the results are compared with the regression model predictions. Prediction from ANFIS outplays the regression model prediction.

In this study, we investigate the impact of Isophorone diisocyanate functionalized graphene oxide (IPDI-GO) on the flame retardancy of rigid polyurethane foam (RPUF). IPDI-GO was synthesized and introduced into the RPUF matrix. The flame retardancy of RPUF was significantly enhanced by the incorporation of IPDI-GO, as evidenced by a reduction in peak heat release rate (PHRR) by 25% and total smoke production (TSP) by 15% in comparison to pure RPUF when IPDI-GO was incorporated at 3 wt%. Scanning electron microscopy (SEM) revealed that IPDI-GO contributed to the formation of a compact, continuous char layer on the RPUF surface. This study underscores the potential of IPDI-GO as a promising flame retardant additive for RPUF.

Seawater evaporation and purification powered by solar energy are considered as a promising approach to alleviate the global freshwater crisis, and the development of photothermal materials with high efficiency is imminent. In this study, cellulose nanofiber (CNF)/MXene/Ni chain (CMN) aerogels were successfully synthesized by electrostatic force and hydrogen bond interaction force. CMN10 achieved a favorable evaporation rate as high as 1.85 kg m− 2 h− 1 in pure water, and the corresponding evaporation efficiency could be up to 96.04%. Even if it is applied to seawater with multiple interference factors, its evaporation rate can still be 1.81 kg m− 2 h− 1. The superior seawater evaporation activity origins from the promoted separation of photoexcited charges and photothermal conversion by the synergy of Ni chain and MXene, as well as the water transport channel supported by the 3D structure frame of CNF. Most importantly, CMN aerogel can maintain water vapor evaporation rates above 1.73 kg m− 2 h− 1 under extreme conditions such as acidic (pH 2) and alkaline (pH 12) conditions. In addition, various major ions, heavy metals and organic pollutants in seawater can be rejected by CMN10 during desalination, and the rejection rates can reach more than 99.69%, ensuring the purity of water resources after treatment. This work shows the great potential of CMN aerogel as a high-efficiency solar evaporator and low-cost photothermal conversion material. Cellulose nanofiber (CNF)/MXene/Ni chain (CMN) aerogels demonstrated high evaporation of water from sea water.

High-quality diamond films have attracted extensive attentions due to their excellent optical and electrical properties. However, several issues, such as random orientation, stress accumulation, and slow growth rate, severely limit its applications. In this paper, high-quality polycrystalline diamond films with highly ordered (100) orientation were prepared by microwave plasma chemical vapor deposition. The effects of growth parameters on the microstructure, quality and residual stress of diamond films were investigated. Experimental results indicate that relatively high temperature at low methane concentration will promote the formation of (100) oriented grains with a low compressive stress. Optimized growth parameters, a methane concentration of 2% along with a pressure of 250 Torr and temperature at 1050 ℃, were used to acquire high growth rate of 7.9 μm/h and narrow full width at half maximum of Raman peak of 5.5 cm− 1 revealing a high crystal quality. It demonstrates a promising method for rapid growth of high-quality polycrystalline diamond films with (100) orientation, which is vital for improving the diamond related applications at low cost.