본 연구를 통해 한국산 Thyas속을 검토하였다. 이 중, T. coronata (Fabricius, 1775)는 성충 및 생식기 도해사진을 기반으로 최초로 그 분류학 적 기재문을 작성하였다. 모든 한국산 Thyas속 종에 대한 분류학적 진단형질 및 분포 정보를 함께 제공하였다.

본 연구는 가선집재시스템에서 벌도목을 견인 시작 지점에서 Yarder까지 안전하게 운반할 수 있는 최대 하중인 가선경로상의 허용반송량을 분석하여, 가선집재 작업에 필요한 의사결정을 지원하기 위한 목적으로 수행되었다. 이를 위해 허용반송량의 변화를 예측하는 모델을 구현하고, 가선집재시스템 구동에 주요 인자인 지형조건, Yader의 높이, 가선의 직경, 벌도목의 견인형태 및 작업방식에 대한 민감도 분석을 수행하였다. 분석결과, 가선 설치계획에 있어 오목한 지형을 선택하는 것이 안전성과 효율성에 중요한 영향을 미치는 것을 확인할 수 있었고 Yarder의 높이나 Wire rope의 직경, 벌도목의 견인형태 및 시스템의 작업방법과 같은 시스템을 구성하는 여러 요인에 의해 작업 생산량이 달라지는 것을 확인하였다. 이러한 결과는 가선의 설치경로에 대한 허용반송량 분석의 필요성과 시스템의 다양한 구동 요인에 대한 평가가 가선집재시스템의 국내 현장 적용 및 보급에 필요함을 보여준다.

Erebinae, a subfamily within the family Erebidae, represents one of the largest classification groups in Lepidoptera. This taxonomic group exhibits remarkable ecological diversity and astonishing predator defense adaptations. Erebinae possesses what is presumed to be the most sensitive tympana (hearing organs) among Lepidoptera, allowing them to evade predators such as bats. Furthermore, they have distinctive hindwings, in contrast to their inconspicuous forewings, which they can suddenly expose as a strategy to escape danger from predators. The classification of the subfamily Erebinae is based on molecular studies conducted by Zahiri et al. (2012). However, despite these efforts, there is no single external feature that can reliably identify all Erebinae, and the boundaries of this group remain somewhat unclear. Many specimens have yet to be thoroughly studied, and numerous genera are still awaiting placement within the phylogenetic framework.

The development of biochemical pesticides to replace existing chemical pesticides and the search for new substances with potential insecticidal ability are continuously required. The purpose of this study is to control myzus persicae with pyrethrum biochemical pesticide containing of high concentration of pyrethrin as an active ingredient. Pyrethrum dried powder was extracted with 95% ethanol for different periods of time and it was confirmed that the pyrethrin content increased as the extraction period increased and the extraction conditions for 20 days had the highest yield with 0.2% pyrethrin. We produced a prototype containing 0.13% pyrethrin content (pyrethrin II: 0.06%, pyrethrin I: 0.06%). and in 200 fold dilute spray condition. It showed a 77.2% corrected mortality against myzus persicae which is comparable to chemical pesticide. We are continuously researching to reduce the decomposition of active ingredients and look for additives to increase the insecticidal activity.

Erebidae is one of the most diverse families within Lepidoptera. Erebinae is one of its subfamilies that stands out for having a remarkable diversity, which complicates its taxonomic classification. It exhibits a high degree of global diversity, with many yet-to-be-explored faunal aspects. In this study, we review the historical classification of Erebinae and incorporate the latest molecular phylogenetic analyses alongside traditional morphological groupings. Furthermore, we present a detailed list of Erebine tribes and species found in Korea, highlighting the literature and morphological characteristics employed in grouping genera within these tribes. This study aims to advance our understanding of Erebinae’s complex taxonomy and biodiversity.

The objective of this experiment was to investigate the effect of drip irrigation volume on tomatoes (Solanum lycopersicum L.) grown in a greenhouse using perlite medium. Plants were treated by three different irrigation treatment I0, I25, and I50 (where irrigation volume of I25 and I50 was 25% and 50% higher than I0, having limited or no leaching). Growth characteristics of plants, yield and water use efficiency were measured. The result showed that plant height, leaf length and leaf width were lowest in the I0 treated plants. However, these parameters were not statistically significant differences between the plants that were grown in the I25 and I50 treatment. Soluble solids content, acidity and dry matter of 111th, 132nd, and 143rd days harvested tomato were higher in the plants irrigated with lowest volume (I0) than the higher volume (I25 or I50). In addition, water content was lower in the 111th and 132nd days of harvested tomatoes from the I0 treatment. The number of big-size tomatoes (>180 g) was significantly higher in the I25 irrigated plants. There was no significant difference in the total number of harvested fruits among the treatments. The average fruit weight and total yield of harvested tomatoes were lowest in the I0 treated plants. The water consumption of tomato was not significantly different amongst the treatments but water use efficiency was lowest in the I0 treatment. Principal component analysis revealed that total soluble solid and acidity of tomato showed a positive correlation between each other. These results suggest that I25 was the optimum irrigation treatment for tomato based on its measured growth characteristics, yield and water use efficiency.

The continuous development of in-vehicle information systems in recent years has dramatically enriched drivers’ driving experience while occupying their cognitive resources to varying degrees, causing driving distraction. Under this complex information system, managing the complexity and priority of information and further improvement in driving safety has become a key issue that needs to be urgently solved by the in-vehicle information system. The new interactive methods incorporating the augmented reality (AR) and head-up display (HUD) technologies into in-vehicle information systems are currently receiving widespread attention. This superimposes various onboard information into an actual driving scene, thereby meeting the needs of complex tasks and improving driving safety. Based on the qualitative research methods of surveys and telephone interviews, this study collects the information needs of the target user groups (i.e., beginners and skilled drivers) and constructs a three-mode information database to provide the basis for a customized AR-HUD interface design.

NDF (No Defect Found) is a phenomenon in which defects have been found in the manufacturing, operation and use of a product or facility, but phenomenon of defects is not reproduced in the subsequent investigation system or the cause of the defects cannot be identified. Recently, with the development of the fourth industrial revolution, convergence of hardware and software technologies in various fields is spreading to products such as aircraft, home appliances, and mobile devices, and the number of parts is increasing due to functional convergence. The application of such convergence technologies and the increase in the number of parts are major factors that lead to an increase in NDF phenomena. NDF phenomena have a significant negative impact on cost, reliability, and reliability for both manufacturers, service providers and operators. On the other hand, due to the nature of NDF phenomena such as difficult and intermittent cause identification and ambiguity in judgment, it is common to underestimate the cost of NDF or fail to take appropriate countermeasures in corporate management. Therefore, in this paper, we propose a methodology for estimating NDF costs by the PAF model which is a quality cost analysis model and ABC (Activity Based Costing) technique. The methodology of this study suggests a detailed procedure and the concept to accurately estimate the NDF costs, using ABC analysis, accounting system information, and IT system data. In addition case studies have validated the methodology. We think this could be a valid methodology to refer to when estimating the cost of other parts. And, it is meaningful to provide important judgment information in the decision-making process based on quality management and ultimately reduce NDF costs by visualizing them separately by major variable factors.

Recently, with the development of technologies for the fourth industrial revolution, convergence and complex technology are being applied to aircraft, electronic home appliances and mobile devices, and the number of parts used is increasing. Increasing the number of parts and the application of convergence technologies such as HW (hardware) and SW (software) are increasing the No Defect Found (NDF) phenomenon in which the defect is not reproduced or the cause of the defect cannot be identified in the subsequent investigation systems after the discovery of the defect in the product. The NDF phenomenon is a major problem when dealing with complex technical systems, and its consequences may be manifested in decreased safety and dependability and increased life cycle costs. Until now, NDF-related prior studies have been mainly focused on the NDF cost estimation, the cause and impact analysis of NDF in qualitative terms. And there have been no specific methodologies or examples of a working-level perspective to reduce NDF. The purpose of this study is to present a practical methodology for reducing NDF phenomena through data mining methods using quantitative data accumulated in the enterprise. In this study, we performed a cluster analysis using market defects and design-related variables of mobile devices. And then, by analyzing the characteristics of groups with high NDF ratios, we presented improvement directions in terms of design and after service policies. This is significant in solving NDF problems from a practical perspective in the company.

The CC chemokine receptor 5 (CCR5) is a G protein-coupled receptor that regulates chemotaxis and effector functions of immune cells. It also serves as the major co-receptor for the entry of human immunodeficiency virus (HIV). Recently, CCR5 inhibitors have been developed and used for the treatment or prevention of HIV infections. Additionally, it has been identified that CCR5 controls bone homeostasis by regulating osteoclastogenesis and the communication between osteoblasts and osteoclasts. However, the effects of CCR5 inhibition on bone tissue in elderly patients are unknown. This study aimed to examine the bone phenotype of aged CCR5 knockout (KO) mice. Femoral and tibial bones were isolated from 12-month and 18-month old wild-type (WT) and CCR5 KO mice, and microcomputed tomography and histology analyses were performed. Twelve-month-old CCR5 KO mice exhibited a decreased trabecular bone mass and cortical bone thickness in both femoral and tibial bones compared with agematched WT mice. Eighteen-month-old mice also showed a decreased trabecular bone mass in femurs compared with control WT mice, but not in tibial bones. Unlike in 12-month-old mice, the cortical margin of femurs and tibias in 18-month-old mice were rough, likely because they were aggravated by the deficiency of CCR5. Overall, our data suggest that the deficiency of CCR5 with aging can cause severe bone loss. When CCR5 inhibitors or CCR5 inactivating technologies are used in elderly patients, a preventive strategy for bone loss should be considered.

본 연구는 국내 가선집재 작업 현장 실태에 대한 사례 조사를 통해 작업의 생산성에 영향을 미치는 집재 작업의 설계와 가선 설치의 공학적 문제점을 파악하고, 그로 인해 손실되는 생산성과 증가되는 비용을 분석하기 위한 목적으로 수행되었다. 분석 결과, 가선집재 설계 시 현장의 지형적 입지여건과 공학적 안전성이 충분히 고려되지 않아 대부분 가선의 처짐(deflection)을 확보하지 못하는 것으로 나타났 다. 이로 인해 시간 당 생산성이 최대 65%까지 감소하고, 집재비용이 2배 이상 증가되어 전반적인 작업의 효율성이 떨어지는 것으로 나타났다. 따라서 앞으로 국내에서 가선집재 작업이 확대되기 위해서는 작업 안전과 효율을 확보할 수 있는 가선의 설치와 장비의 운용, 불필요한 생산비용을 최소화할 수 있 는 현장 기술의 보급이 필요하다.

Electromagnetic interference (EMI) shielding is an important issue in modern daily life due to the increasing prevalence of electronic devices and their compact design. This study estimated EMI-shielding effect (EMI-SE) of small (8–14×17 mm) Hanji (Korean traditional paper) doped with carbon nanotubes (CNTs) and compared to Hanji without CNT using 2H (92.1 MHz) and 23Na (158.7 MHz) nuclear magnetic resonance (NMR) peak area data obtained from 1 M NaCl in D2O samples in capillary tubes that were wrapped in the Hanji samples. The simpler method of using the variation of reflected power and tuning frequency by inserting the sample into an NMR coil was also tested at 242.9, 158.7, and 92.1 MHz. Overall, EMI shielding was relatively more effective at the higher frequencies. Our results validated that NMR methods to be useful to evaluate EMI-SE, particularly for small, flexible shielding materials, and demonstrated that EMI shielding by absorption is dominant in Hanji mixed with CNT.