Debris disks are important observational clues to understanding on-going planetary system formation. They are usually identied by signicant mid-infrared excess on top of the photospheric emission of a central star on the basis of prediction from J-, H-, and Ks-band uxes and the stellar model spectra. For bright stars, 2MASS near-infrared uxes suffer large uncertainties due to the near-infrared camera satu- ration. Therefore we have performed follow-up observations with the IRSF 1.4 m near-infrared telescope located in South Africa to obtain accurate J-, H-, and Ks-band uxes of the central stars. Among 754 main-sequence stars which are detected in the AKARI 18 m band, we have performed photometry for 325 stars with IRSF. As a result, we have successfully improved the ux accuracy of the central stars from 9.2 % to 0.5 % on average. Using this dataset, we have detected 18 m excess emission from 57 stars in our samples with a 3 level. We nd that some of them have high ratios of the excess to the photospheric emission even around very old stars, which cannot be explained by the current planet-formation theories.

Debris disks are circumstellar dust disks around main-sequence stars. They are important observational clues to understanding the planetary system formation. The zodiacal light is the thermal emission from the dust disk in our Solar system. For a comprehensive understanding of the nature and the evolution of dust disks around main-sequence stars, we try a comparative study of debris disks and the zodiacal light. We search for debris disks using the AKARI mid-infrared all-sky point source catalog. By applying accurate ux estimate of the photospheric emission based on the follow-up near-infrared observations with IRSF, we have improved the detection rate of debris disks. For a detailed study of the structure and grain properties in the zodiacal dust cloud, as an example of dust disks around main-sequence stars, we analyze the AKARI mid-infrared all-sky diffuse maps. As a result of the debris disks search, we found old (>1 Gyr) debris disks which have large excess emission compared to their age, which cannot be explained simply by the conventional steady-state evolution model. From the zodiacal light analysis, we nd the possibility that the dust grains trapped in the Earth's resonance orbits have increased by a factor of 3 in the past 20 years. Combining these results, we discuss the non-steady processes in debris disks and the zodiacal light.

The AKARI 9 and 18 m diuse maps reveal the all-sky distribution of the interstellar medium with relatively high spatial resolution of 600. The zodiacal light is a dominant foreground component in the mid-infrared. Thus, removal of the zodiacal light is a critical issue to study low surface brightness Galactic diuse emission. We carried out modeling of the zodiacal light based on the Kelsall model which is constructed from the COBE data. In the previous study, only a time-varying component of the zodiacal light brightness was used for determination of the model parameters. However, there remains a residual component of the zodiacal light around the ecliptic plane even after removal with the model. Therefore, instead of using a time-varying component, we use the absolute brightness of the zodiacal light and we nd that the new model can better remove the residual component. As a result, the best-fit model parameters are changed from those in the previous study. We discuss the properties of the zodiacal light based on our new result.

This study was conducted to determined the status and geographical distribution of the alien invasive Red-eared slider (Trachemys scripta elegans) turtle on Jeju Island. We found thirty-two Red-eared slider habitats including twenty-five ponds, five agricultural reservoirs, a puddle and a stream. Among those, thirteen sites are newly determined habitats of the turtle. The remaining nineteen are previously reported. However, we could not find any turtles at nine sites, which were documented as turtle habitats in earlier reports. A total of one hundred thirty-three turtles were observed. Among them, we determined that thirty-nine were juvenile turtles, found in nineteen different habitats, indicating estimating that Red-eared sliders produced their progeny in the wild of this island. Because of geographical isolation by the ocean, no freshwater turtle had been found until 19th Century. Therefore, the increased number of finding sites and Red-eared sliders indicate the possibility of human release of their pets or for other purposes, and natural propagation in the wild on Jeju Island. Our findings will be useful for management planning to deal with this invasive species, and implementation of a conservation program for native wildlife on Jeju Island.

We plan to produce a faint source catalogue from the AKARI mid-infrared (IR) all-sky diffuse maps. In the publicly-available AKARI mid-IR point source catalogue (PSC), sources were extracted from single- scan images, and conrmed by using the other scan images. By stacking multiple scan images, we can detect fainter sources which are not listed in the PSC. We optimized the source extraction process using a 6◦  6◦ area around the star-forming region, Cepheus B. Then, we divided the all-sky data into three seasonal images, and checked the positions and the uxes of the detected sources on the images. As a result, our new source extraction method works well; 90% of the sources are also identied in the WISE catalogue. In this method, we obtain the detection limit twice deeper than that of the PSC. The number of sources increases by a factor of 2, as compared with the PSC.

We are creating all-sky diffuse maps from the AKARI mid-infrared survey data with the two photometric bands centered at wavelengths of 9 and 18 m. The AKARI mid-infrared diffuse maps achieve higher spatial resolution and higher sensitivity than the IRAS maps. In particular, the 9 m data are unique resources as an all-sky tracer of the emission of polycyclic aromatic hydrocarbons (PAHs). However, the original data suffer many artifacts. Thus, we have been developing correction methods. Among them, we have recently improved correction methods for the non-linearity and the reset anomaly of the detector response. These corrections successfully reduce the artifact level down to 0.1 MJy sr􀀀1 on average, which is essential for discussion on faint extended emission (e.g., the Galactic PAH emission). We have also made progress in the subtraction of the scattered light caused in the camera optics. We plan to release the improved diffuse maps to the public within a year.

We present a comparative study of CO and polycyclic aromatic hydrocarbon (PAH) emission toward a region including the massive star-forming regions of NGC 6334 and NGC 6357. We use the NANTEN 12CO(J=1{0) data and the AKARI 9 m All-Sky diffuse map in order to evaluate the calibration accuracy of the AKARI data. We conrm that the overall CO distribution shows a good spatial correspondence with the PAH emission, and their intensities exhibit a good power-law correlation with a spatial resolution down to 4′ over the region of 10◦10◦. We also reveal poorer correlation for small scale structures between the two quantities toward NGC 6357, due to strong UV radiation from local sources. Larger scatter in the correlation toward NGC 6357 indicates higher ionization degree and/or PAH excitation than that of NGC 6334.

Ganglioside GD1a is specifically formed by the addition of sialic acid to ganglioside GM1a by ST3 β- galactoside α -2,3-sialyltransferase 2 (ST3GAL2). Above all, GD1a are known to be related with the functional regulation of several growth factor receptors, including activation and dimerization of epidermal growth factor receptor (EGFR) in tumor cells. The activity of EGF and EGFR is known to be a very important factor for meiotic and cytoplasmic maturation during in vitro maturation (IVM) of mammalian oocytes. However, the role of gangliosides GD1a for EGFR-related signaling pathways in porcine oocyte is not yet clearly understood. Here, we investigated that the effect of ST3GAL2 as synthesizing enzyme GD1a for EGFR activation and phosphorylation during meiotic maturation. To investigate the expression of ST3GAL2 according to the EGF treatment (0, 10 and 50 ng/ml), we observed the patterns of ST3GAL2 genes expression by immunofluorescence staining in denuded oocyte (DO) and cumulus cell-oocyte-complex (COC) during IVM process (22 and 44 h), respectively. Expression levels of ST3GAL2 significantly decreased (p<0.01) in an EGF concentration (10 and 50 ng/ml) dependent manner. And fluorescence expression of ST3GAL2 increased (p<0.01) in the matured COCs for 44 h. Under high EGF concentration (50 ng/ml), ST3GAL2 protein levels was decreased (p<0.01), and their shown opposite expression pattern of phosphorylation-EGFR in COCs of 44 h. Phosphorylation of EGFR significantly increased (p<0.01) in matured COCs treated with GD1a for 44 h. In addition, ST3GAL2 protein levels significantly decreased (p<0.01) in GD1a (10 μM) treated COCs without reference to EGF pre-treatment. These results suggest that treatment of exogenous ganglioside GD1a may play an important role such as EGF in EGFR-related activation and phosphorylation in porcine oocyte maturation of in vitro.

Cobalt was electrodeposited onto chemical vapor deposition (CVD) graphene/Si/SiO2 substrates, during different time intervals, using an electrolyte solution containing a low concentration of cobalt sulfate. The intention was to investigate the details of the deposition process (and the dissolution process) and the resulting magnetic properties of the Co deposits on graphene. During and after electrodeposition, in-situ magnetic measurements were performed using an (AGFM). These were followed by ex situ morphological analysis of the samples with ΔtDEP 30 and 100 s by atomic force microscopy in the non-contact mode on pristine CVD graphene/SiO2/Si. We demonstrate that it is possible to electrodeposit Co onto graphene, and that in-situ magnetic measurements can also help in understanding details of the deposition process itself. The results show that the Co deposits are ferromagnetic with decreasing coercivity (HC) and demonstrate increasing magnetization on saturation (MSAT) and electric signal proportional to remanence (Mr), as a function of the amount of the electrodeposited Co. It was also found that, after the end of the dissolution process, a certain amount of cobalt remains on the graphene in oxide form (this was confirmed by X-ray photoelectron spectroscopy), as suggested by the magnetic measurements. This oxide tends to exhibit a limited asymptotic amount when cycling through the deposition/dissolution process for increasing deposition times, possibly indicating that the oxidation process is similar to the graphene surface chemistry.

The thermoelectric Seebeck and Peltier effects of a single walled carbon nanotube (SWCNT) quantum dot nanodevice are investigated, taking into consideration a certain value of applied tensile strain and induced ac-field with frequency in the terahertz (THz) range. This device is modeled as a SWCNT quantum dot connected to metallic leads. These two metallic leads operate as a source and a drain. In this three-terminal device, the conducting substance is the gate electrode. Another metallic gate is used to govern the electrostatics and the switching of the carbon nanotube channel. The substances at the carbon nanotube quantum dot/ metal contact are controlled by the back gate. Results show that both the Seebeck and Peltier coefficients have random oscillation as a function of gate voltage in the Coulomb blockade regime for all types of SWCNT quantum dots. Also, the values of both the Seebeck and Peltier coefficients are enhanced, mainly due to the induced tensile strain. Results show that the three types of SWCNT quantum dot are good thermoelectric nanodevices for energy harvesting (Seebeck effect) and good coolers for nanoelectronic devices (Peltier effect).

This study was carried out to evaluate the influencing factors that affect the reproductive performance of cows at the Monirampur upazila in Jessore district of Bangladesh. A total of 224 cows were brought to the upazila livestock hospital for artificial insemination (AI). The cows were inseminated between 12 to 18 hours from the onset of estrus and data was obtained from the owner. Out of 224 cows, 133 became pregnant and 91 were non pregnant. In this study, the overall pregnancy rate was 59.29%. Among the age variability, the highest pregnancy rate (70.27%) was at the age of 4 years old. In case of breed variation, the highest pregnancy rate was observed in local breed (69.07%) compared with other crossbred cows. Hence the breed variations significantly influence the conception rate of cows. According to the parity, we found that the pregnancy rate was increasing with their parity but decreasing after 4th parity. The highest conception rate was observed in 3rd parity (67.74%) which was significantly higher than that of heifers (Parity-0). Here we also found that the types of bull semen used for AI had no significant effect for pregnancy rate. The skills of AI technician for AI to cows were significantly affecting the pregnancy rate. However, this study is not enough for rating and comment about the reproduction performance of cows. Therefore, further extensive study is needed for rating and recommendation for the cattle up gradation at that particular area.

Congenital duodenal obstruction is a rare cause of neonatal intestinal obstruction caused by various intrinsic and extrinsic congenital lesions. Annular pancreas is one of the causes of extrinsic duodenal obstruction and a duodenal web is one of the causes of intrinsic duodenal obstruction. The simultaneous occurrence of an extrinsic and intrinsic pathology is rare. Only four such cases have been reported in literature. We present a similar case of male neonate with partial duodenal obstruction caused by annular pancreas and an intrinsic duodenal web.

목 적 : Fractional Flow Reserve(분획혈류예비력:FFR)은 관상동맥 질환이 있는 환자에서 중간 동맥 협착의 기능적 중요성을 평가하는 방법이다. 이는 관상동맥 협착 부위의 원위부와 근위부 정상혈관의 최대 혈류량의 비율(ΔP)을 말하며 카데터(catheter)가 혈관에 삽입되어 FFR 측정 위치까지 이동되는 방법이 사용된다. 그러나 이 방법은 침습적(invasive)이어서 환자가 불편하고, 신체에 손상을 줄 위험이 있어 비침습적(non-invasive) 방법으로 혈관의 병변(lesions)을 진단 및 평가하는 방법이 주목 받고 있다. 이중 MRI PC-VENC 기법을 이용한 MR-FFR이 그 대안으로 평가되고 있어 MR-FFR 사용에 대한 임상적 유용성을 알아보고자 한다. 대상 및 방법 : 2015년 8월부터 2015년 12월까지 관상동맥의 근위부에 의미 있는 동맥경화반이 관찰되어 FFR측정이 예정된 환자 5명과 건강한 성인 11명에 대해 MR-FFR 검사를 진행하였다. 3.0T MRI 장비를 사용하였고 코일은 phased-array body coil을 사용하였다. CT에서 재구성된 관상동맥 경화반의 범위를 참조하여 coronary LAD MPR(multi planner reconstruction) 영상을 만든 후 혈관의 정상 부위와 동맥 경화반 부위를 포함하여 scan 부위를 결정하여 PC-VENC 영상을 얻는다. 사용된 parameter는 VENC=35-65cm/s in all 3 directions, FA=15˚, cardiac phase=2(70ms/phase), in-plane resolution =0.5-0.6×0.5-0.6mm², slice thickness=3.2mm, scan time은 2-6 min/slice으로 설정하였다. 얻어진 VENC 영상에서 ΔPMR를 구하기위해 MATLAB을 사용하여 각 슬라이스에서 산출된 최대 속도를 적분하여 Navier-Stokes(NS) 공식을 이용하여 data를 산출하였다. 결 과 : Proximal left anterior descending coronary artery(pLAD)에서 stenosis의 area percentage가 증가 할수록 ΔPMR 값을 산출할 수 있는 mmHg 값도 높게 나타났다. 이는 stenosis 정도가 심할수록 분획혈유예비력(FFR) 값이 증가함을 의미하며 기존 FFR을 구하는 방식과 비교했을 때 환자 군(6.40±4.43mmHg), 정상군(0.62±0.49mmHg)에서 유의한 값(p<0.001)으로 나타났다. 기존 FFR 과 MR-FFR 간 결정계수 값은 R2=0.938으로 나타나 MR-FFR 기법과 기존 FFR 측정차가 크게 없음을 알 수 있었다. 결 론 : 현재까지 진행된 연구에서 관상동맥 경화반이 있는 혈관과 정상 혈관 모두에서 기존 FFR 값과 비교했을 때 ΔPMR 분석은 매우 유의한 값을 나타내고 있었다. 이에 따라 다른 종류의 침습적인 방법인 intravascular ultrasound(IVUS), optical coherence tomography (OCT) 등를 이용한 FFR 과 MR-FFR의 비교 연구가 진행되고 있으며 또한 공간적, 시간적 해상도 및 노이즈 감소의 관점에서 기술의 개선과 정확성을 향상시키기 위한 시퀀스 개발도 진행되고 있다. 따라서 비침습적이고 피폭이 없으며 환자에게 유용한 정보가 많은 MR-FFR 측정 방법은 앞으로 임상에서 유용하게 쓰여질 것으로 판단된다.

Fast, cheap and sufficient serodiagnostic tools needs to be developed for the early detectionof brucellosis. Currently the tools cannot differentiate an active infection from vaccinated, norcan it differentiate other bacterial infections with lipopolysaccharides, especially Yersiniainfections. In this study, we purified recombinant outer membrane protein 10 and 28(rOmp10,rOmp28), and a dipstick assay(indirect or sandwich) was constructed with single(rOmp10 orrOmp28) and combined rOmps(rOmp10 and rOmp28) from Brucella(B.) abortus 544 to evaluatebovine Brucella positive serum collected during the beginning of the Korean outbreak from2006 to 2015. In application with single rOmp, rOmp10(70%; indirect, 92.11%; sandwichdipstick) and rOmp28(72.5%; indirect, 86.84%; sandwich dipstick) had comparable results. Inaddition, results indicated that dipstick with combined rOmps(rOmps10 and rOmp28) weresuperior in detecting positive serum samples, at 85% indirect and 100% sandwich dipstick. Surprisingly, the results were the same in detecting negative results at 97.78% for both singleand combined indirect dipsticks. The dipstick tools with rOmp10 and rOmp28 would be usefulfor a rapid screen method for bovine brucellosis.

Supply chain is usually represented by a network (which is called supply chain network) that contains some nodes. In a supply chain network these nodes are suppliers, plants, distribution centers and customers which are some facilities connected by some arcs to each other. The arcs connect the nodes in the direction of their production flow, meaning that each arc shows a route between the facilities for transporting the products. A multi-stage supply chain network (MSCN) is defined as a sequence of multiple supply chain network stages. This paper addresses a typical supply chain network problem which is based on a two-stage single-product system under uncertain conditions such that both cost and constraint parameters are interval numbers. The combination of these uncertain parameters are considered in this typical problem for the first time. In this case, two different order relations (the order relations UC ≤ and HW ≤ ) for interval numbers are considered. Then, two solution procedures are developed in order relations for the interval two-stage supply chain network design problem. The efficiency of the proposed method is illustrated by a numerical example where it is proved that the relation HW ≤ shows better performance than the relation UC ≤ .

The goal of this master plan is to revitalize the local economy and provide local citizens with a place for leisure activities by transforming the magnificent pine forestscape at Geumam neighborhood park into a tourism resource. The present study has analyzed and synthesized the natural and human environments of the target site, which is located in Noam-dong, Namwon-si, in Jeollabuk-do. This master plan has adopted a motto, “engage five senses in pine trees; entertain five senses for fine life”, to express its philosophy of how to utilize the resources of pine trees. To this end, the present study has specified the suggested contents based on literature review of the studies on pines. Beyond an ordinary theme park, this master plan has been designed to create a central space that connects many rural village forests located in Namwon. In this master plan, main facilities have been suggested: the pine exhibition/experience hall, where visitors can appreciate and experience various materials related to pines; and the pinewood cabin, which is built with huge pine trunks, providing multiple functions as a space for rest and recreation ; the healing forest, which utilizes the existing pine forest; the pine sculpture garden; and the pine poem garden. In addition, the present study suggests two representative tourism resources of Namwon as symbolic elements: the herbs and royal azaleas of Mt. Jiri. unique hands-on pine experience activities available at these spaces have been proposed in two categories: festival programs and year-round programs.

OBJECTIVES : In this study, microstructural components of crumb rubber modified asphalt (CRMA) binder were investigated using environmental scanning electron microscope (ESEM). To clearly understand the elemental composition of the CRMA binder, energy dispersive X-ray spectroscopy (EDX) was employed on the ESEM samples. METHODS: CRMA binders were produced using open blade mixers at 177℃ for 30 min. The binders were artificially aged through a series of accelerated aging processes. Sample preparation was done by making a mold shape on the glass slide. Thereafter, the morphology of the CRMA binder was observed using the ESEM coupled with the EDX. RESULTS : The images captured from the ESEM indicate that the unaged CRMA binder appears to have a single-phase continuous nonuniform structure after the addition of crumb rubber particles, whereas the artificially aged CRMA binder was observed to have two different phases. ESEM coupled with EDX shows detailed internal structure of the modified binders compared to other technologies (i.e., optical microscopy, atomic force microscopy, and conventional scanning electron microscope). CONCLUSIONS: The captured images resemble the internal structures such as the viscous properties of the unaged CRMA binder and the interaction between the rubber particles and the base binder at aged condition. ESEM is a powerful instrument and with the introduction of EDX, it provided more details of the network microstructure of the asphalt binder. ESEM coupled with EDX is recommended for use in future investigation of microstructure of asphalt binders.

The purpose of this study is to analyze the behavior of users of the Seomjin River cycling road, which is surrounded by gorgeous natural landscape. Further, we aim to understand the correlation between the importance and performance of various factors rated by users to obtain baseline data that can help to increase the usage of the bike path. We conduct a survey by performing one-on-one interviews at three locations, all of which have a certification center that verifies the completion of the bike path. The bike path attracts visitors from all over the country. First-time visitors and travel plans involving stays of at least one night account for a relatively high percentage of users. The primary purpose of the visit was more related to mental health issues rather than physical health issues. The most attractive feature of the Seomjin River is the beautiful landscape. However, the participation rate from clubs is low, and the visit rate to nearby tourist attractions is also low for scheduling reasons. Important factors that are considered using the bike path are accessibility, safety, bike path condition, amenity, and convenience, while the connectivity has a relatively low importance. We confirm that the convenience of the bike path is as important as providing a safe and amenity while surrounded by gorgeous landscape. The amenity and safety are rated highly for performance and while accessibility and convenience have low rating. The analysis of the detail evaluation items showed that the performance was high for surrounding gorgeous landscape, and non-crowded setting and performance was lowest for inadequate bike repair facilities. A comparison of the importance and performance showed that the performance lower than the importance, and had statistical significance. Accessibility, which is an external environmental factor, had the largest difference. On the other hand, for the detail evaluation items, the degree of crowding, surrounding landscape, and experience opportunities did not have statistical significance, but had a higher performance. This confirmed that they were factors that had the highest satisfaction for the Seomjin River cycling road. Importance-Performance Analysis (IPA) results indicated that the items requiring consistent maintenance were surrounding landscape, bike path signs, safety from pedestrians and vehicles, and convenient accessibility. Items that required specific improvement were convenient transportation for returning home, pavement material, and the degree of damage. On the other hand, items that were more effective in terms of their ability to maintain the current conditions were experiences of nearby rural villages, accessibility to nearby tourist attractions, local tourist attractions, and bike repair facilities. The bike repair facilities option had a considerably low performance compared to the importance. For items that were rated with low importance but high performance, it was more effective to allocate the effort for corresponding sections to other items. However, for the degree of crowding, which belonged to this particular category, it was actually more efficient to place on attracting users in order to increase the usage of the bike path.

적색 K2SiF6:Mn4+ 형광체는 SiO2 in/HF/KMnO4H2O solution 용액의 산화환원 반응에 의해 합성된다. 이 형광체 는 450 nm 이하의 파장에서 여기되어 Mn4+의 2Eg → 4A2g에 의해 반치폭이 10 nm인 약 634 nm의 적색 빛을 발광한다. 입자의 크기는 약 5 ㎛이고 결정구조는 Fm-3m (225)의 공간군을 가지는 입방정계이다 (JCPDS85-1382). 온도의존 발광 스펙트럼에서는 약 175 ℃에서의 발광강도가 상온에서보다 66 %까지 감소하였다. 이 형광체는 청색 발광을 하는 InGaN LED에 의해 효과적으로 여기 될 수 있어서 녹색이나 황색 형광체와 함께 사용하여 연색지수가 높은 백색 LED를 만들 수 있다.