Canine parvovirus-2 (CPV-2) has been reported worldwide as a major pathogen associated with acute hemorrhagic enteritis. The disease is a major infectious cause of death, particularly in young dogs. The earliest type of CPV-2 was replaced with three main subspecies, CPV-2a, CPV-2b, and CPV-2c, within a few years. Vaccination is carried out regularly, but the emergence of antigenic variants and the influence of maternal antibodies have limited the efficacy of commercial vaccines. New vaccines, such as the subunit vaccine, have been developed for alternative, safe, and effective vaccination. The baculovirus expression vector system (BEVS) is an excellent eukaryotic expression system with a high-level expression of foreign proteins and the ability of post-translational modification. Therefore, it is used widely to produce recombinant protein and subunit vaccines. In this study, the VP2 protein of CPV-2b cloned in the gateway vector system was generated using a baculovirus expression system in Spodoptera frugiperda (SF9) insect cells. Hemagglutination assay (HA) titers (24) were obtained, and the expression was detected in 6-His tagged VP2 and monoclonal antibody (mAb) against CPV-2 by western blotting. The VP2 protein of CPV-2b expressed in this study may provide a basis for a clinical diagnosis and vaccination applications for CPV-2.

Photocatalytic CO2 reduction is a promising approach for reducing CO2 emissions and achieving the goal of carbon neutrality. In this work, selectively coupling Cu(OH)2 and CuO with amine-modified brookite TiO2 ( NH2–B–TiO2) has been achieved by a simple precipitation method. The results show that CuO is better than Cu(OH)2 as a co-catalyst to enhance the CO2 photoreduction capability of NH2– B–TiO2. The highest rates of CO2 conversion to CH4 and CO of NH2– B–TiO2–CuO composite reach 6.05 and 3.25 μmol h− 1 g− 1, respectively, which is higher than 8 times the yield of CH4 of NH2– B–TiO2. It is proposed that the NH2– B–TiO2–CuO composite offers an effective charge transfer through the formation of a p–n junction between NH2– B–TiO2 and CuO interfaces, while in the NH2– B–TiO2–Cu(OH)2 composite, the Cu(OH)2 dominantly serves as an electron sink to capture photo-induced electrons, promoting photo-induced carrier separation. This work provides an ingenious synthetic method for selectively anchoring Cu(OH)2 and CuO on semiconductors with different charge transfer routes for an efficient CO2 photoreduction.

The emergence of Mo2C- based catalysts in recent years has been favored as promising contender within diverse class MXenes. In terms of rapid development in the photocatalytic application, these intriguing compounds exhibit excellent photocatalytic performance because of their superior optical properties and peculiar structure characteristics. Unfortunately, a systematic review of Mo2C- based catalysts is lacking. In this review, we abstract the implication of structure—property relationship of emerging Mo2C- based MXenes materials and their applications toward the photocatalytic hydrogen evolution reaction (HER). Furthermore, synthetic pathways to prepare high-quality, low cost Mo2C- based MXenes materials and their outcomes for high HER applications are systematically described. Finally, several insights are provided into the prospects and future challenges for the development of highly reactive Mo2C- based MXenes materials, which present large range opportunities in this promising 2D materials for green and clean energy in environmental fields. This review provides a comprehensive scientific guide to the preparation, modification, and photocatalytic HER of MXenes-based materials.

Amorphous molybdenum sulfide ( MoSx) has been regarded as a promising hydrogen evolution reaction (HER) catalyst due to its mild preparation conditions and low-cost precursor materials. In this work, we report a simple strategy combining the growth of amorphous MoSx on the surface of metal organic frameworks (ZIF-67) and annealing treatment to prepare Co-doped MoSx nanopolyhedrons (denoted as CoMoSx NPs). The CoMoSx NPs exhibit excellent HER activity in acid condition with an overpotential of 188 mV at a current density of 10 mA cm− 2 (η10), and a relatively stable overpotential after 2000 cyclic voltammetry (CV) cycles testing. The excellent HER performance of the CoMoSx NPs can be attributed to the doping of Co element adjust the electronic structure and increase the conductivity of catalyst, and the nanopolyhedrons structure which can expose more active sites for HER electrocatalytic. This study offers a low-cost and simple strategy to prepare high-activity HER catalyst, which holds great promises in developing advanced electrocatalysts for energy storage.

Phytohormones (plant hormones) are a class of small-molecule organic compounds synthesized de novo in plants. Although phytohormones are present in trace amounts, they play a key role in regulating plant growth and development, and in response to external stresses. Therefore, the analysis and monitoring of phytohormones have become an important research topic in precision agriculture. Among the various detection methods, electrochemical analysis is favored because of its simplicity, rapidity, high sensitivity, and in-situ monitoring. Graphene and graphene-like carbon materials have abundant sources, exhibiting large specific surface area, and excellent physicochemical properties. Thus, they have been widely used in the preparation of electrochemical biosensors for phytohormone detection. In this paper, the research advances of electrochemical sensors based on graphene and graphene-like carbon materials for phytohormone detection have been reviewed. The properties of graphene and graphene-like carbon materials are first introduced. Then, the research advances of electrochemical biosensors (including conventional electrochemical sensors, photoelectrochemical sensors, and electrochemiluminescence sensors) based on graphene and graphene-like carbon materials for phytohormone detection is summarized, with emphasis on their sensing strategies and the roles of graphene and graphene-like carbon materials in them. Finally, the development of electrochemical sensors based on graphene and graphene-like carbon materials for phytohormone detection is prospected.

Decabromodiphenyl ether (BDE209) is a persistent aromatic compound widely associated with environmental pollutants. Given its persistence and possible bioaccumulation, exploring a feasible technique to eradicate BDE209 efficiently is critical for today’s environmentally sustainable societies. Herein, an advanced nanocomposite is elaborately constructed, in which a large number of titanium dioxide ( TiO2) nanoparticles are anchored uniformly on two-dimensional graphene oxide (GO) nanosheets ( TiO2/GO) via a modified Hummer’s method and subsequent solvothermal treatment to achieve efficient photocatalytic degradation BDE209. The obtained TiO2/ GO photocatalyst has excellent photocatalytic due to the intense coupling between conductive GO nanosheets and TiO2 nanoparticles. Under the optimal photocatalytic degradation test conditions, the degradation efficiency of BDE209 is more than 90%. In addition, this study also provides an efficient route for designing highly active catalytic materials.

Reliable, inexpensive, environment-friendly, and durable properties of carbon materials with unique and outstanding photoelectric performance is highly desired for myriad of applications such as catalysis and energy storage. Since lattice modulation is a vital method of surface modification of materials, which form by an external force during the synthesis process, causing the internal compression and stretching, leading to lattice sliding event. In this review, we present a summary of different methods to tailor the lattice modulation in 2D carbon-based materials, including grain/twin boundary, lattice strain, lattice distortion, and lattice defects. This overview highlights the implication control of the diverse morphologies of nanocrystals and how to tailor the materials properties without adding any polymers. The improvement in the performance of 2D carbon materials ranges from the enhancement of charge transport and conductivity, structural stability, high-performance of light absorption capacity, and efficient selectivity promote the future prospect of 2D carbon materials broaden their applications in terms of energy conversion and storage. Finally, some perspectives are proposed on the future developments and challenges on 2D carbon materials towards energy storage applications.

The synthesis of a novel first stage GIC containing simultaneously lithium, potassium and barium through a solid–liquid reaction by molten salts method is described. Such a route has been largely developed in our laboratory for intercalation of metals into graphite. The interplanar distance of this quaternary compound reaches 950 pm and exhibits poly-layered intercalated sheets defined by X-ray measurements. The Li0.2K0.75Ba0.6C6 chemical formula of the compound is determined by ion beam analysis and this GIC is remarkably homogeneous. This GIC is the first poly-layered one containing barium.

The RCEP is the largest FTA in the world. It was negotiated at a moment in history when criticism concerning globalization, multilateralism, and FTAs as effective tools for growth and well-being abounded. Those concerns have been aggravated by COVID-19 and the war in Ukraine, which affected not only world health but also increased protectionist temptations and disruptions in GVCs. This paper aims to analyze the likely contribution of this mega-deal, its economic and political variables, including the leadership that China will exert, and the objectives pursued during the negotiation. The agreement is contrasted with other major FTA, namely the CPTPP, the FTAAP and the Pacific Alliance, mainly in relation to integration efforts. It is concluded that the RCEP will indeed increase intraregional trade, although its full impact will take years to be felt. To maximize its impact, the RCEP needs to incorporate key current issues and new members to the pact.

In the multilateral trading systems under the WTO, the national security exception plays a crucial role in balancing trade liberalisation against the security interest of a sovereign nation. The proper use of the national security exception is of particular importance in the disputes with mixed political, diplomatic and military elements. The EU has recently accused China of breaching WTO obligations by taking restrictive trade measures against Lithuania, thereby affecting free trade between the EU and China. This paper argues that the allegation would be frustrated by the application of the WTO’s national security exception, as the dispute is rooted in Lithuania’s breach of its commitment to the One-China principle, which is crucial to China’s sovereignty and territorial integrity. Outside the WTO ruling system, a unilaterally imposed international sanction would be insufficient to alleviate the dispute between China and Lithuania and would lead to a deadlock in the multilateral trading system.

Western coastal area of Chungnam, including Cheonsu Bay and Garorim Bay, has suffered from hot and cold extremes. In this study, the extreme sea surface temperature on the western coast of Chungnam was analyzed using the quantile regression method, which extracts the linear regression values in all quantiles. The regional MOHID (MOdelo HIDrodinâmico) model, with a high resolution on a 1/60o grid, was constructed to reproduce the extreme sea surface temperature. For future prediction, the SSP5-8.5 scenario data of the CMIP6 model were used to simulate sea surface temperature variability. Results showed that the extreme sea surface temperature of Cheonsu Bay in August 2017 was successfully simulated, and this extreme sea surface temperature had a significant negative correlation with the Pacific decadal variability index. As a result of future climate prediction, it was found that an average of 2.9oC increased during the simulation period of 86 years in the Chungnam west coast and there was a seasonal difference (3.2oC in summer, 2.4oC in winter). These seasonal differences indicate an increase in the annual temperature range, suggesting that extreme events may occur more frequently in the future.

Background: The globalization of the healthcare industry and the increasing demand for skilled professionals in the global healthcare industry have opened up opportunities for specialized biotech healthcare professionals to seek overseas employment and career advancement. Objects: This study aimed to develop educational content essential for the overseas employment of digital bio-health professionals. Methods: A survey was conducted among 196 participants. Google Forms (Google) were utilized to create and administer the survey, employing purposive sampling, a non-probability sampling method. Data analysis was performed using IBM SPSS 25.0 (IBM Co.), including Cronbach’s α and independent sample t-tests to assess significant differences. Results: About half of college students are interested in overseas employment and international careers, while the other half had not. The most common reason for wanting to work or go overseas was “foreign experience will be useful for future activities in Korea.” Students who had experience taking courses from the Bio-health Convergence Open Sharing University preferred overseas programs more than those who did not have that experience. In terms of the degree of desire for overseas education courses provided by universities, contents related to human health were the highest, followed by bio-health big data. Conclusion: Many students wanted to work and go overseas if there is sufficient support from the university. The findings in this study suggest that universities are necessary to play an important role in supporting students' aspirations to work or go overseas by providing language education, education and training programs, information on overseas jobs, and mentoring programs.

Background: In modern society, the use of computers accounts for a large proportion of our daily lives. Although substantial research is being actively conducted on musculoskeletal diseases resulting from computer use, there has been a recent surge in interest in improving the working environment for prevention. Objects: This study aimed to examine the effects of posture correction feedback (PCF) on changes in neck posture and muscle activation during computer typing. Methods: The participants performed a computer typing task in two sessions, each lasting 16 minutes. The participant’s dominant side was photographed and analyzed using ImageJ software to verify neck posture. Surface electromyography (EMG) was used to confirm the participant’s cervical erector spinae (CES) and upper trapezius muscle activities. The EMG signal was analyzed using the percentage of reference voluntary contraction and amplitude probability distribution function (APDF). In the second session, visual and auditory feedback for posture correction was provided if the neck was flexed by more than 15° in the initial position during computer typing. A 20-minute rest period was provided between the two sessions. Results: The neck angle (p = 0.014), CES muscle activity (p = 0.008), and APDF (p = 0.015) showed significant differences depending on the presence of the PCF. Furthermore, significant differences were observed regarding the CES muscle activity (p = 0.001) and APDF (p = 0.002) over time. Conclusion: Our study showed that the feedback system can correct poor posture and reduces unnecessary muscle activation during computer work. The improved neck posture and reduced CES muscle activity observed in this study suggest that neck pain can be prevented. Based on these results, we suggest that the PCF system can be used to prevent neck pain.

Background: Office workers experience neck or back pain due to poor posture, such as flexed head and forward head posture, during long-term sedentary work. Posture correction is used to reduce pain caused by poor posture and ensures proper alignment of the body. Several assistive devices have been developed to assist in maintaining an ideal posture; however, there are limitations in practical use due to vast size, unproven long-term effects or inconsistency of maintaining posture alignment. We developed a headphone and necklace posture correction system (HANPCS) for posture correction using an inertial measurement unit (IMU) sensor that provides visual or auditory feedback. Objects: To demonstrate the test-retest reliability and concurrent validity of neck and upper trunk flexion measurements using a HANPCS, compared with a three-dimensional motion analysis system (3DMAS). Methods: Twenty-nine participants were included in this study. The HANPCS was applied to each participant. The angle for each action was measured simultaneously using the HANPCS and 3DMAS. The data were analyzed using the intraclass correlation coefficient (ICC) = [3,3] with 95% confidence intervals (CIs). Results: The angular measurements of the HANPCS for neck and upper trunk flexions showed high intra- (ICC = 0.954–0.971) and inter-day (ICC = 0.865–0.937) values, standard error of measurement (SEM) values (1.05°–2.04°), and minimal detectable change (MDC) values (2.92°–5.65°). Also, the angular measurements between the HANPCS and 3DMAS had excellent ICC values (> 0.90) for all sessions, which indicates high concurrent validity. Conclusion: Our study demonstrates that the HANPCS is as accurate in measuring angle as the gold standard, 3DMAS. Therefore, the HANPCS is reliable and valid because of its angular measurement reliability and validity.

This paper explores the relationships of various cognitive, attitudinal, and behavioural responses of e-discount sales promotion technique preferences consumers have when making purchases through online food delivery services (OFDS). This paper highlights new findings towards expanding e-discount and sales promotion literature and thus provide relevant implications.

In today's fast-evolving technological environment, the growth of mobile devices has provided businesses with additional knowledge on how to effectively communicate with their targeted audience. As big data generated by mobile users has become a valuable source for improving communication, users’ location data has provided an additional parameter to take into account while trying to enhance the effectiveness of digital marketing campaigns. This paper presents a comparative study of the location-based marketing field and tools. It provides an overview of different exploitation methods of location-based mobile services and data for effective digital marketing campaigns and guidelines for future research.

This study aims to investigate how attitudes towards femvertising affects brand credibility, brand authenticity, and purchase intention. Further, the mediation of femwashing on these relationships was investigated. And lastly, the impact of brand credibility and authenticity on purchase intention was examined. The results show that a favourable attitude towards femvertising positively affects brand credibility and authenticity but is not significant for purchase intention. Likewise, the mediation of femwashing on these relationships was not significant. In addition, brand credibility and brand authenticity had a positive impact on purchase intention.

This paper aims at analyzing, throughout an Italian and American cross-cultural study, one of the phenomena which is booming in the fashion luxury sector: the resale market. It is evident that Covid-19 has boosted a deep transformation, that the world of luxury was already going through: a) the increased relevance acquired by the experiential consumption; b) platforms that offer new forms of digitalized buying experiences; c) request for sustainability.

Digital technology has been increasingly applied in the traditional tourism forms, including the heritage tourism. However, the role of technology and tradition for attracting tourists in industrial heritage tourism destinations has not been clearly identified. To narrow the research gaps, this study adopted a two stage study, based on grounded theory and factor analyses. In Study 1, through the data analysis of 60 in-depth interviews, 10 stimuli factors in 3 categories were identified. In Study 2, a questionnaire was developed based on the results of Study 1, through exploratory factor analysis (EFA) and confirmatory factor analysis (CFA), we established and tested a model of on-site stimulus factors. Findings can deepen the understanding of industrial heritage tourism from a tourist perspective and offer practical implications.

This study quantifies drivers and consequences of positive and negative electronic word-of-mouth (eWOM) engagement on social networking sites building upon social identity theory. Fitting a structural model using software smartPLS 4.0, the analysis compares two distinct groups of respondents. Though these groups seem to belong to the same in-group. Nevertheless, group members differ with respect to the drivers and consequences of their positive and negative eWOM engagement. As engagement is often used in the context of service-dominant logic, we reveal which non-monetary value co-creating and value-reducing consequences result from positive and negative eWOM engagement. This study highlights the impact of eWOM engagement on self-brand connection and self-brand incongruity and identifies commitment as a major driver. For international respondents negative eWOM does not automatically increase self-brand incongruity but low negative eWOM has a positive effect on the self-brand connection.