Cymbidium flower is mainly grown for exportation to China and Japan, but detection of a few pests including the cotton aphid, Aphis gossypii (Hemiptera: Aphidae), necessitated post-harvest treatment for casual exportation. Thus, we irradiated electron beam to cotton aphids occurring in cymbidium to establish post-harvest method for casual exportation of the flowers. For cymbidium, six categories of product quality were examined after eight different doses were irradiated (100, 200, 300, 400, 500, 600, 800 and 1,000 Gy). One thousand Gy to cymbidium caused an extreme deterioration only in vase life in both colors compared to control (0 Gy). In the case of cotton aphids, adult longevity decreased from 11.23 (100 Gy) to 4.70 (400 Gy) when four different doses were irradiated (100, 200, 300, and 400 Gy), with control being an average of 20.89 days. The numbers of total first instar nymph produced per adult was not significantly differed among five doses (2.21 ~ 2.74 individuals), but was substantially lower compared to control (an average of 51.46; P < 0.0001). Live F1 nymphs did not develope to adults at all five doses, except for a single nymph at 100 Gy, which was dead right after emergence. The results of probit analysis indicated that majority of adults required 3.33 ~ 7.55 days for 90% mortality at 200 Gy and higher, but at 100 Gy it required 41.56 days. Therefore, higher than 100 Gy might be required for complete control of adult cotton aphids and their F1.

The genus Diadegma is a well-known parasitoid group and some are known to have symbiotic virus so called polydnavirus (PDV, more specifically Ichnovirus, IV). The presence of the IV in the Diadegma species a has already been identified more than a decade ago. Previously we reported a DfIV, 62 genomic segments, 247kb from D. fenestrale which parasitized wide range of lepidopteran species (Generalist). However, DsIV from D. semiclausum which parasitized in the P. xylostella (Specialist) has 48 genomic segments, 208kb. Finally, 123 ORFs were re-annotated (repeat element protein, 41; cysteine motif protein, 11; viral innexin, 6; viral ankyrin, 8; polar residue rich protein, 7; N gene, 3; Neuromodulin protein, 2 and not assigned gene, 45). DsIV also have most of lepidopteran immunosuppression gene families and 103 ORFs annotated (repeat element protein, 36; cysteine motif protein, 8; viral innexin, 7; viral ankyrin, 6; polar residue rich protein, 7; N gene, 3; and not assigned gene, 36). Certainly, although viral species specific segments exists, two IVs showed high similarity in most of segments. However DfIV have some more number of that genes such as cysteine motif protein and viral ankyrin. Two Diadegma species also showed difference in mitochondrial genome structure. Therefore we concluded that two species has their own evolutionary linage depending on the lepidopteran hosts with its own symbiotic virus.

Roads in Korea are equipped with PMS (Pavement Management System) computation data that runs on highway, national highway and municipal road. PMS is a program that selects and manages the road pavement optimal maintenance alternative as a indicator of the road pavement structural and functional performance. PMS is a system that has been developed for the primary purpose of maintaining the structural performance of road pavement, and so far does not include any indicators associated with the safety of road users. However, the road cave-in, which have recently become an issue on social networking sites, mass-media, and other issues, should pose systematically because it can make a safety risk to road users, and in particular lead to the structural and functional failure of the PMS program in view of the road pavement. Accordingly, this research has developed a practical use case for developing an integrated road cave-in management program based on the results of various studies on the exploration, analysis, assessment and handling of the existing road cave-in in Korea.

The composition of the deicer sprayed on the highway is spreading over the highway by the scattering or snow removal activity, or car movement and consequently affecting the vegetation environment around the highway. These are the cause of the damage of fruit trees and crops, and also the cause of corrosion of highway structures. The goal of this study is to estimate the detected range of deicer components from a highway. The concentration of the deicer components in gauze and soil were investigated according to the crossing distance from the highway. The data collected were then used to estimate the concentration range of deicer components in a rage of distance up to 100 m from the highway where the deicer was spread. The sample time and weight of gauze were measured before and after installation, and the soil was collected at more than three points in parallel with the highway at the gauze installation point. The components in gauze and soil were investigated in addition to the deicer components (Ca2+, Na+, Cl-) as well as Mg2+ and K+. As Ca2+ and Cl- components of deicer were affected by agricultural use, Na+ component was selected as a tracer and further SAR (Sodium Adsorption Ratio) of soil was analyzed to examine the degree of influence on vegetation indirectly. The gauze concentration was evaluated by the concentration of the deicer ingredient at the background concentration of the blank gauze. The total amount of the deicer sprayed in the study road for 4 months (winter season) was about 93 ton/km. In the gauze test, the spread of the deicer was detected at a distance of 100 m in study area, but the concentration of the deicer in the gauze by distance decreased rapidly within 10 m from the highway. And concentration of the deicer components in gauze and soil came down after rainy season (August ~ Sep.). The results showed that the components of the deicer could be spread widely by the wind. The effective range of the deicer on vegetation based on SAR in soil was estimated to be less than 20 m from the highway. This study examines the concentration changes of the deicer components in gauze and soils and shows that deicer components sprayed on the highway are accumulated and moved over time by wind, snow removal, terrain, water system and land use around the highway.

The effects of cold storage temperature and exposure duration on immature stages of spotted-wing drosophila (SWD) Drosophila suzukii (Diptera: Drosophilidae) on ‘Campbell Early’ grapes were examined to establish a phytosanitary control method. The immature stages (eggs, larvae and pupae) of SWD were all dead after a 6-day cold treatment at 1°C and 8-day cold treatment at 1.5 and 2°C. Small-scale tests using pupae, which were the most-cold tolerant stage, confirmed the validity of the selected temperature and exposure durations. Conversely, the 8- and 10-day at 1°C treatments showed 100% mortality, suggesting that these treatments can guarantee quarantine security against infestations of SWD on exported ‘Campbell Early’ grapes.

In this study, we developed 12 microsatellite markers specific to N. pygmaea using Illumina paired-end sequencing. Forty individuals of N. pygmaea collected from three currently known localities in South Korea were genotyped to validate these markers and to preliminarily assess population genetic characteristics. No locus showed significant deviation from the Hardy–Weinberg equilibrium (HWE). Our preliminary data indicate an absence of inbreeding in all populations and an absence of obvious genetic difference. The microsatellite markers developed in this study will be useful for studying the population genetics of N. pygmaea collected from other regions, including additional sites in South Korea.

The aim of this study was to select various fungal strains indigenous to Korea that have the potential to produce cellulases, including filter paper activity (FPase), endo-β-1,4-glucanase (EG), and β-glucosidase (BGL). Among the 25 species of Ascomycetes and the 32 species of Basidiomycetes tested in this study, the Bjerkandera adusta KUC10565, Heterobasidion orientale KUC10556, Hyphoderma praetermissum KUC10609, and Trichoderma harzianum KUC1716 all exhibited remarkably high FPase activity. In addition, the T. harzianum KUC1716 showed high levels of EG and BGL activity. This strain has been selected for further study because of their enzymatic potential.

Ficus carica L. (common fig), one of the first plants cultivated by humans, originated in the Mediterranean basin and currently grows worldwide, including southwest Asia and South Korea. It has been used as a traditional medicine for treatment of metabolic, cardiovascular, and respiratory diseases as well as hemorrhoids and skin infections. Its pharmacological properties have recently been studied in detail, but research on the anti-cancer effect of its latex has been only been studied on a limited basis on several cell lines, such prostate cancer, breast cancer, and leukemia. In this study, we investigated the anti-cancer activity of the latex of Ficus carica L.and its underlying mechanism in FaDu human hypopharynx squamous carcinoma cells. (See Ed. note above) We confirmed through SDS-PAGE analysis and gelatinolytic activity analysis that the latex of Ficus carica contains cysteine protease ficin. Our data showed that the latex inhibited cell growth in a dose-dependent manner. In addition, the latex treatment markedly induced apoptosis in FaDu cells as determined by FACS analysis, elevated expression level of cleaved caspase-9, -3 and PARP (poly (ADP-ribose) polymerase), and. increased the expression of Bax (pro-apoptotic factor) while decreasing the expression of Bcl-2 (anti-apoptotic factor). Taken together, these results suggested that latex containing the ficin inhibited cell growth and induced apoptosis by caspase and the Bcl-2 family signaling pathway in FaDu human hypopharynx squamous carcinoma cells. These findings point to the potential of latex of Ficus carica to provide a novel chemotherapeutic drug due to its growth inhibition effects and induction of apoptosis in human oral cancer cells.

The electronic and optical characteristics of molybdenum disulphide (MoS2) film significantly vary with its thickness, and thus a rapid and accurate estimation of the number of MoS2 layers is critical in practical applications as well as in basic researches. Various existing methods are currently available for the thickness measurement, but each has drawbacks. Transmission electron microscopy allows actual counting of the MoS2 layers, but is very complicated and requires destructive processing of the sample to the point where it will no longer be useable after characterization. Atomic force microscopy, particularly when operated in the tapping mode, is likewise time-consuming and suffers from certain anomalies caused by an improperly chosen set point, that is, free amplitude in air for the cantilever. Raman spectroscopy is a quick characterization method for identifying one to a few layers, but the laser irradiation causes structural degradation of the MoS2. Optical microscopy works only when MoS2 is on a silicon substrate covered with SiO2 of 100~300 nm thickness. The last two optical methods are commonly limited in resolution to the micrometer range due to the diffraction limits of light. We report here a method of measuring the distribution of the number of MoS2 layers using a low voltage field emission electron microscope with acceleration voltages no greater than 1 kV. We found a linear relationship between the FESEM contrast and the number of MoS2 layers. This method can be used to characterize MoS2 samples at nanometer-level spatial resolution, which is below the limits of other methods.