The influence of Hi-flux powders characteristics on the performance of magnetic powder cores was studied. It was found that different cooling rate and nozzle configuration could change the shape and microstructure of powders. Smooth surface and spherical shape of powders were beneficial to improve DC bias performance and reduce core losses of magnetic powder core.

This paper described the preparation method for composing high-grade synthetic diamond by water atomizing using FeNi30 powder catalyst. The objective of this article is about powder making process using super high water atomizing in the atmosphere of inert gas, and then corroded the powder with a corrosion inhibitor. Finally, FeNi30 catalyst powder with lower oxygen content and good sphericity is produced. The experiment of making diamonds by using cubic press and the performance of the diamonds are also discussed.

The primary aim pursued by the preparation of separation membrane is the preparation of the membrane thin as well as with no defect. The field-flow fractionation deposition is a new molding technology which can overcome the traditional disadvantages such as multi-preparation to the preparation of great area of separation membrane with no defect. Therefor the mainly ingredients which influence the appearance and performance of titanium membrane layer are investigated by scanning electricity mirror (SEM) as well as porous material testing instrument: powder performance prepared and confected; selection of supporting body; sintering system such as temperature and time. It is shown that the membrane thickness can be controlled at or so; the filtration precision mainly rests with powder performance and selection of supporting body and little sintering system

The mechanical properties of ferrous powder metallurgy (P/M) materials are directly related to their microstructure. Ferrous P/M materials with sufficient hardenability will develop microstructures containing significant percentages of martensite in the as-sintered condition. Recently, sinter-hardening has developed into a highly cost effective production method through hardened P/M parts without the need for additional heat-treatments. This paper reviews the advances of sinter-hardening as well as some key processing parameters such as sintering temperature, cooling rate, tempering required to produce high quality sinter-hardened components. Specific topics including effect of alloying elements, alloying methods, and the Characterization and observation of microstructure are discussed.

A new process of pulsed electric current sintering was developed. It combines compaction with activated sintering effectively and can manufacture bulky nano-crystalline materials very quickly. A nano-structured steel is obtained with high relative density and hardness by this process. The average grain size of iron matrix is 58nm and the carbide particulate size is less than 100 nm. The densification temperature of ball-milled powders is approximately lower than that of blended powders. When the sintering temperature increases, the density of as-sintered specimen increases but the hardness of as-sintered specimen first increases and then decreases.

The working group for an infrared telescope(IRT) toward East Asian Observatory has been set up in EAMA6. This report declares the membership of IRT working group, reviews briefly the activities of promoting the IRT, and puts forward the future plan.

This paper reviews the progress in the VLBI (Very Long Baseline Interferometry) studies of Sgr A*, the best known supermassive black hole candidates with a dark mass concentration of 4x106 M⊙ at the center of the Milky Way. The emphasis is on the importance of the millimeter and sub-millimeter VLBI observations in the detection of Sgr A*'s intrinsic structure and search for the structural variation.

We present CO(3-2), CO(2-1), and 230 GHz (1.3 mm) continuum images of nearby galaxies taken with the Submillimeter Array (SMA). Our main topic is to study the relation between higher-J molecular gas (e.g., CO J=3-2, 2-1) and nuclear activities (e.g., active galactic nuclei [AGNs] and starbursts). The nearby Seyfert 2 galaxy M51 shows strong CO(3-2) emission from the circumnuclear molecular gas, with an intensity twice as strong as that of the CO(1-0) emission. Strong CO(3-2) emission enhancement suggests that the circum nuclear molecular gas in M51 is warm and dense, which may be related to the AGN activities. Molecular gas in the nearby moderate starburst galaxy NGC 6946 is distributed along the large-scale bar or spiral arms and along the minibar, and the multi-J CO line images show very similar distribution to each other. For this galaxy, there is no clear enhancement in higher-J lines as seen in M51, which may be because NGC 6946 does not have clear AGN activities. Based on the results of these two galaxies, the physical conditions of the circum nuclear molecular gas may be related to the AGN activities. We also observed the nearby edge-on starburst galaxy NGC 3628 and the starburst/Seyfert composite galaxy NGC 4945 with the CO(2-1) line and 230 GHz (1.3 mm) continuum emission. These information will give us some hints for understanding the relation between nuclear activities and circum nuclear molecular gas and dust.

In order to construct an artificial cultivation of Nostoc flagelliforme on solid medium, we attempted to assess the viability of approaches, which utilized either BG-11 agar or sand medium using both sterile and non-sterile algal segments. In the trial in

The program of site survey in western China has been initiated by the National Astronomical Observatories of China(NAOC) toward large telescope facilities. The program is carried out in aspects of remote studies and local surveys. The preliminary results show that the eastern Pamirs and Ali area in Tibet may be the best candidates for further monitoring. The site survey group of NAOC will proceed to set up site testing stations on the selected sites and perform monitoring and campaign in 2005.

Anti-oxidation coatings are the key technique for carbon/carbon (C/C) composites used as the thermal structural materials. The microstructure and oxidation behavior of several kinds of high-performance ceramic coatings for C/C composites prepared in Northwestern Polytechnical University were introduced in this paper. It showed that the ceramic coatings such as SiC, Si-MoSi2, SiC-MoSi2, Al2O3-mullite-SiC and SiC/yttrium silicate/glass coatings possessed excellent oxidation resistance at high temperatures, and some of these coatings were characterized with excellent thermal shock resistance. The SiC-MoSi2 coating system has the best oxidation protective property, which can effectively protect C/C composites from oxidation up to 1973 K. In addition, the protection and failure reasons of some coatings at high temperature were also provided.