황백(Cortex Phellodendri: CP)은 황벽나무(Phellodendron amurense)의 건조된 수피로부터 얻어진다. 이 수피는 한국의 전통 한약제로서 설사, 황달, 무릎과 발의 통증, 요도관 및 피부 감염증에 폭넓게 사용되어 왔다. 이들 기능성성분의 분리 및 정제는 박층 크로마토크래피, 컬럼 액체 크로마토크래피 및 HPLC와 같은 여러 분석법들이 동양의 약초연구에 이용되어 왔다. 본 연구는 CP로부터 berberine을 분리하기 위해 향류분배 크로마토크래피법(CPC)으로 효과적으로 수행하였다. 두 용매의 CPC 최적조성은 n-butanol: acetic acid: water(4:1:5 v/v/v)이었다. 이동상의 유속은 1,000 rpm 회전력에서 상승법으로 분당 3 mL 속도로 전개시켰다. CPC에서 분리된 분획분은 prep-HPLC로 정제하였다. 1H-NMR 스펙트럼은 4.10과 4.20 ppm에서 3H(－OCH3), 6.10 ppm에서 2H의 (－OCH2O－) proton signal의 공명이 관찰되었다. 2개의 방향족 proton은 이중결합 패턴을 보였다. H-11과 H-12 doublet은 각각 7.98과 8.11에서 나타났다. 13C-NMR 스펙트럼에서는 C2와 C3의 methylenedioxy group(－OCH2O－), C9과 C10에 methoxy group(－OCH3)이 4개의 치환된 형태로 보였다. 분리․정제된 berberine의 화학구조는 1H, 13C-NMR, ESI-MS 데이터 분석으로 확인하였다.

In this experiment, a highly porous scaffold of biphasic calcium phosphate (BCP) was prepared using the spongereplica method. The BCP scaffold was coated with 58S bioactive glass (BG) and sintered for a second time. The resulting scaffold was coated with gelatin (Gel) and cross-linked with [3-(3-dimethyl aminopropyl) carbodiimide] and N-Hydroxysuccinamide (EDC-NHS). The initial average pore size of the scaffold ranged from 300 to 700μm, with more than 85 % porosity. The coating of BG and Gel had a significant effect on the scaffold-pore size, decreasing scaffold porosity while increasing mechanical strength. The material and surface properties were evaluated by means of several experiments involving scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) and X-ray diffraction (XRD). Cytotoxicity was evaluated using MTT assay and confocal imaging of MC3T3-E1 pre-osteoblast cells cultured in vitro. Three types of scaffold (BCP, BCP-BG and BCP-BG-Gel) were implanted in a rat skull for in vivo evaluation. After 8 weeks of implantation, bone regeneration occurred in all three types of sample. Interestingly, regeneration was found to be greater (geometrically and physiologically) for neat BCP scaffolds than for two other kinds of composite scaffolds. However, the other two types of scaffolds were still better than the control (i.e., defect without treatment).

Candelilla wax-in-water nanoemulsions stabilized by Span 80/Tween 80 were prepared by the phase inversion composition (PIC) method. Stable nanoemulsions with droplet diameters below 50 nm could be formed when the hydrophilic–lipophilic balance (HLB) values were between 13.5 and 14.5, surfactant concentration was 5.0 wt%, and the surfactant-wax ratio was 1:1. Increased emulsification temperature and cooling rate were found to improve the emulsion properties. Process of PIC (adding aqueous phase to the wax phase) produced smaller droplet size nanoemulsion compared to the process of adding wax phase to the aqueous phase. The stability of these nanoemulsions was assessed by following the change in droplet diameters with time of storage at room temperature (∼25 °C). The size remained constant during 2 months storage time.

Quercetin and genistein, plentifully present in fruits and vegetables, are flavonoid family members that have antioxidative function and plant-derived phytoestrogen activity. The antioxidative effects of quercetin and genistein on boar sperm characteristics and in vitro development of IVF embryo were investigated. The sperm motility was increased by addition of genistein 50 μM for 6 hr incubation compared to control (p<0.05). The sperm viability was increased by addition of quercetin 1 and 50 μM and genestein 1 and 50 μM for 3 hr incubation. In addition, the sperm viability seemed to be increased dose-dependantly by addition of quercetin or genistein 1 and 50 μM, respectively (p<0.05). The membrane integrities were not increased by quercetin or genistein treatments for 3 hr or 6 hr incubation period except for quercetin 1 μM for 3 hr incubation. In mitochondrial activities, addition of quercetin 50 μM for 6 hr incubation increased mitochondrial activity but decreased at 100 μM concentration compared with control (p<0.05). When porcine IVF embryos were cultured in PZM-3 medium supplemented with low concentrations of quercetin (1∼10 μM), the developmental rates to morula and blastocyst increased but significantly decreased at high concentrations of quercetin (25∼50 μM). The highest developmental rate to blastocysts among all concentrations of quercetin was shown at quercetin 10 μM (p<0.05). The developmental rates to morula or blastocysts at low (0.01∼1 μM) and high (5∼10 μM) concentrations of genistein were not significantly different among all treatment group and genistein did not affect on IVF embryo development. These results suggest that quercetin and genistein seem to have positive effects at certain concentrations on sperm characteristics such as motility, viability and mitochondrial activity. In addition, low concentrations of quercetin (1, 5 and 10 μM) in this experiment, seem to have beneficial effect on porcine IVF embryo development but genistein did not affect on it at all given concentrations (0.01∼10 μM).

This study was carried out to investigate the effects of tissue inhibitor of matalloproteinase-1 (TIMP-1), Activin A and Heparin binding epidermal growth factor (HB-EGF) on in vitro production of bovine embryos. In experiment 1, presumptive zygotes were cultured in the medium supplemented with TIMP-1 (0.5 μg/ml), Activin A (100 ng/ml), or HB-EGF (100 ng/ml) at 39 ℃ in a humidified atmosphere of 5% (v/v) CO2, 5% (v/v) O2 and 90% (v/v) N2. In experiment 2, TIMP-1 + HB-EGF or Activin A + HB-EGF combinations were supplemented in the culture medium. The developmental rate to blastocysts, hatching rate and total cell numbers of the blastocysts were evaluated in both experiments. The embryos cultured in medium without growth factor supplementation was used as control group. In experiment 1, the embryos cultured in medium supplemented with TIMP-1 and Activin A showed significantly higher developmental rate to blastocysts than those cultured with HB-EGF and control (36.9%, 34.1%, 21.2% and 23.1%, respectively) (P<0.0001). However, the hatching rate of blastocyst was significantly higher in embryos with HB-EGF than those with TIMP-1, Actvin A and Control groups (84.4%, 58.8%, 51.4% and 49.3%, respectively) (P<0.001). Total cell number per blastocyst was also significantly higher in embryos with HB-EGF group (174.3±2.5) than those with TIMP-1, Activin A (149.7 and 150.0, respectively) (P<0.05) and Control (119.0) (P<0.001). In experiment 2, embryos cultured with combined treatment of Activin A and HB-EGF resulted in significantly higher rates of blastocysts formation (48.0%), hatching rate (89.7%) and total cell number in blastocyst (182.3±2.1) than those with TIMP-1 and HB-EGF combination group (32.0%, P<0.001; 76.6%, P<0.05; 165.7±4.2, P<0.001, respectively). Our data demonstrate that in vitro production of bovine embryos could be improved by combined supplementation of Activin A and HB-EGF in culture medium.

Sambucus sieboldiana (SS) is a member of the family Caprifoliaceae and has been recommended as a functional material because of its several bioactivities. Although numerous literatures are available on the pharmacological and biological activities, the biological activity of SS in bone regeneration process has not yet been well-defined. Therefore, in this study, the effect of SS was investigated in the proliferation and differentiation of MC3T3-E1 osteoblastic cell line. The treatment of SS did not significantly affect the cell proliferation in MC3T3-E1 cells. SS significantly accelerated the mineralization and significantly increased the expression of alkaline phosphatase (ALP) and osteocalcin (OC) mRNAs, compared to the control, in the differentiation of MC3T3-E1 cells. SS significantly accelerated the decrease of osteonectin (ON) mRNA expression as compared with the control in a time-dependent manner in the differentiation of MC3T3-E1 cells. These results suggest that the SS facilitate the osteoblast differentiation and mineralization in MC3T3-E1 osteoblastic cells. Therefore, there may be potential properties for development and clinical application of bone regeneration materials.

본 연구의 목적은 미국에서 알츠하이머 병으로 고통 받는 노인 부모를 돌보는 아들의 독특한 부양의 역할을 검토하는 것입니다. 의학과 과학기술의 발달, 생활의 질 향상과 영양개선 등은 인간의 평균 기대수명을 연장시켰으며, 아울러 사망률과 출생률의 감소는 노인인구의 증가와 함께 여러 가지 노인성 만성질환을 유발시키고, 특히 노인성 치매, 알츠하이머 병 등의 이환율이 급격히 증가하면서 노인의 부양문제가 전 세계적인 사회문제로 급부상하고 있는 실정이다. 세계적인 현상인 노인 인구의 증가는 미국에서도 인구 통계학적으로 개인, 가족 사회에 큰 영향과 변화를 가져오고 있다. 즉, 미국의 많은 세대가 공감하듯이, 정치적 이슈와 공공 정책은 필연적으로 고령화 문제를 고리로 연결되었다고 공감하고 있다. 미국의 사회 보장제도와 메디 케어의 프로그램은 만성질환으로 타인의 도움 없이 생활하기 어려운 노인에게 사회 공동 책임으로 부담하는 보건, 의료, 요양, 복지 등 다양한 서비스를 장기간 제공해 일상생활을 지원하는 시스템으로, 치매, 알츠하이머 병 등 노인성질환을 앓고 있는 노인을 부양하고 있는 많은 가족들에게 커다란 혜택은 헤아릴 수 없는 도움의 제도이다. 알츠하이머환자의 일상적인 질병 특성으로 가족 전체와 주부양자의 신체, 심리 정서적 피로는 물론 사회 경제적 고갈로 소진을 야기 시키게 된다. 아울러, 알츠하이머 병을 앓고 있는 노인의 부양은 가족 공동 책임이라기보다 가족 구성원 중 누군가 일부 또는 한사람(주부양자; 배우자, 며느리, 딸 등 여성가족), 즉 여성에게 전적으로 의존하고 있는 것이 일반적인 상황이다. 따라서 본 논문은 문헌연구를 통하여 미국에서 알츠하이머 병으로 고통 받는 노인 부모를 돌보는 가족구성원 가운데 특별히 아들의 독특한 부양의 역할을 검토하는 것이다.

The aim of this study was to determine the beneficial effect of propofol on human keratinocytes that have undergone hypoxia reoxygenation (H/R) injury and to investigate whether autophagy is associated with the protective mechanism. Thus, we evaluated how propofol influences the intracellular autophagy and apoptosis during the H/R process in the HaCaT cells. The cultured human keratinocyte cells were exposed to 24 h of hypoxia (5% CO2, 1% O2, 94% N2) followed by 12 h of reoxygenation (5% CO2, 21% O2, 74% N2). The experiment was divided into 4 groups: (1) Control=Normoxia ; (2) H/R=Hypoxia Reoxygenation ; (3) PPC+H/R=Propofol Preconditioning+Hypoxia Reoxygenation; (4) 3-MA+PPC+ H/R=3-MA-Methyladenine+Propofol Preconditioning+ Hypoxia Reoxygenation. In addition, Western blot analysis was performed to identify the expression of apoptotic pathway parameters, including Bcl-2, Bax, and caspase 3 involved in mitochondrial-dependent pathway. Autophagy was determined by fluorescence microscopy, MDC staining, AO staining, and western blot. The H/R produced dramatic injuries in keratinocyte cells. In our study, the viability of Propofol in H/R induced HaCaT cells was first studied by MTT assay. The treatment with 25, 50, and 100 μM Propofol in H/R induced HaCaT cells enhanced cell viability in a dose-dependent manner and 100 μM was the most effective dose. The Atg5, Becline-1, LC3-II, and p62 were elevated in PPC group cells, but H/R-induced group showed significant reduction in HaCaT cells. The Atg5 were increased when autophagy was induced by Propofol, and they were decreased when autophagy was suppressed by 3-MA. These data provided evidence that propofol preconditioning induced autophagy and reduced apoptotic cell death in an H/R model of HaCaT cells, which was in agreement with autophagy playing a very important role in cell protection.

The purpose of this study was to isolate and identify bacteria from the 4 patients with non-odontogenic infectious lesions (mucormycosis, chronic inflammation from wound infection, and two actinomycosis) and determine their antimicrobial susceptibility against eight antibiotics. Bacterial culture was performed under three culture conditions (anaerobic, CO2, and aerobic incubator). The bacterial strains were identified by 16S rRNA gene (16S rDNA) sequence comparison analysis method. For investigating the antimicrobial susceptibility of the bacteria against eight antibiotics, penicillin G, amoxicillin, tetracycline, cefuroxime, erythromycin, clindamycin, vancomycin, and Augmentin® (amoxicillin + clavulanic acid), minimum inhibitory concentration (MIC) measurement was performed using broth microdilution assay. Nosocomial pathogens such as Enterococcus faecalis, Klebsiella pneumoniae, Bacillus subtilis, and Neisseria flavescens were isolated from mucormycosis. Veillonella parvula, Enterobacter hormaechei, and Acinetobacter calcoaceticus were isolated from chronic inflammatory lesion. Actinomyces massiliensis was isolated from actinomycosis in parotid gland. Capnocytophaga ochracea was isolated from actinomycosis in buccal region in anaerobic condition. There was no susceptible antibiotic to all bacteria in mucormycosis. Tetracycline was susceptible to all bacteria in chronic inflammation. C. ochracea was resistant to vancomycin and penicillin G; and other antibiotics showed susceptibility to all bacteria in actinomycosis. The results indicated that the combined treatment of two or more antibiotics is better than single antibiotic treatment in mucormycosis, and penicillin is the first recommended antibiotic to treat actinomycosis.

한국 미기록속인 넓은가슴네눈반날개속(Eudectus Redtenbacher) (신칭)의 분류학적 연구 결과, 넓은가슴네눈반날개(E. japonicus Zerche) (신칭)와 배무늬넓은가슴네눈반날개(E. rufulus Weise) (신칭) 두 종을 국내에 처음 보고한다. 두 종에 대한 재기재, 진단 형질의 그림, 그리고 검색표를 제시한다.

Double walled carbon nanotubes (DWCNTs) are considered an ideal model for studying the coupling interactions between different concentric shells in multi-walled CNTs. Due to their intrinsic coaxial structures they are mechanically, thermally, and structurally more stable than single walled CNTs. Geometrically, owing to the buffer-like function of the outer tubes in DWCNTs, the inner tubes exhibit exciting transport and optical properties that lend them promise in the fabrication of field-effect transistors, stable field emitters, and lithium ion batteries. In addition, by utilizing the outer tube chemistry, DWCNTs can be useful for anchoring semiconducting quantum dots and also as effective multifunctional fillers in producing tough, conductive transparent polymer films. The inner tubes meanwhile preserve their excitonic transitions. This article reviews the synthesis of DWCNTs, their electronic structure, transport, and mechanical properties, and their potential uses.

Development cannot be thoughtless for the environment and is to create a convenient and comfortable environment; thus, we should not take only economic factors into consideration as if automobiles cannot be valued more than human beings. People should be considered first because they are the ones who live in developed space; therefore, nature and people should be the main issue when development is planned. This study is to organize these environment and development problems and suggest the fundamental application principle of 'conservation first and development afterward' by discovering problems and measures through the environmental simulation of the Ropeway that was one of major issues in the local community. It is based on the simulation by using the Arc GIS program and Jeju local data from metrical maps (1/2500이 of the national geography service. In addition, the scale modification has been conducted with the consideration of the size of buildings and measured data of the GIS maps. we have discussed the current situation and problems of damage to scenery caused by development of the ropeway construction on Mt. Halla that is World Natural Heritage and essential to scenery factors of Jeju. The cause of the problems was created by development based on the economic logic with its methods with less regards for the local environment. therefore, it is also important to create urban landscape that fits for Jeju as the first stage of success to becoming Juju Free International City. It is very encouraging that the provincial office has recently formed teams for urban design to keep and maintain its scenery and landscape that fit for Jeju. However, there are several problems to be solved before the effort to keep Jeju’s scenery and landscape makes steady headway. First, the problem of the overlap of administrative regulations should be solved. Second, there should be the consistency of the administrative performance. Third, the establishment of a objective standard for the creation of urban scenery based on culture. Fourth. a mature sense of citizenship is needed because there is a limit to administrative efforts to keep the urban scenery and landscape.

This study researched the symbolic meaning of the costume colors in the independent film <Bittersweet Life>. The purpose of the study is to shed light on the relation between a film and the clothing color by exploring the symbolic meaning of costume colors as based on place images and as reflected in characters’ internal psychological states and situations. The conclusions of this study are as follows. First, the colors primarily presented were neutral shades of black and white or dark, almost-black tones, representing the negative narrative structure and depicting the image of a human being. Second, a series of bright blue shades were presented to reflect the positive narrative structure of a human being returning successfully to reality. Third, the application of color, involving both the psychological aspect as well as the symbolism of color, was effectively delivered to the audience. Fourth, the emphasis on color in the smallest details of costumes was analyzed, and it was found that symbolic color effectively communicated the whole image of transformation as the story progressed, clearly delivered delicate emotional messages, and contained symbolism relating to particular places and situations.

Apparel design is an economic activity to create values for users over the value chain of a product. In this paper, the contribution of apparel design is defined as the enhancement of users' perceived values by improving users' experience of products. In this context, the value of a product corresponds to compensation for experience or a promise for experience of a product. Experience can be sensory or psychological benefits to users. To evaluate the value of apparel design, the researcher identified and analyzed the apparel design parameters affecting users' experience and benefits of products such as macro-, micro-environmental factors, value chain factors, apparel designer factors, and user factors. For an analytical modeling of the values of apparel design, this paper introduces the concept of a utility function from economics. In economics, utility is a measure of desirability or satisfaction that can be correlative to need or desire. The measure of value can be found in the price which a user is willing to pay for the fulfillment or satisfaction of need or desire via the experience of a product.

Titanium and its alloys are useful for implant materials. In this study, porous Ti-Nb-Zr biomaterials were successfully synthesized by powder metallurgy using a NH4HCO3 as space holder and TiH2 as foaming agent. Consolidation of powder was accomplished by spark plasma sintering process(SPS) at 850˚C under 30 MPa condition. The effect of high energy milling time on pore size and distribution in Ti-Nb-Zr alloys with space holder(NH4HCO3) was investigated by optical microscope(OM), scanning electron microscope(SEM) & energy dispersive spectroscopy(EDS) and X-ray diffraction(XRD). Microstructure observation revealed that, a lot of pores were uniformly distributed in the Ti-Nb-Zr alloys as size of about 30-100μm using mixed powder and milled powders. In addition, the pore ratio was found to be about 5-20% by image analysis, using an image analyzer(Image Pro Plus). Furthermore, the physical properties of specimens were improved with increasing milling time as results of hardness, relative density, compressive strength and Young's modulus. Particularly Young's modulus of the sintered alloy using 4h milled powder reached 52 GPa which is similar to bone elastic modulus.

본 연구를 통해 한국산(産) Nacoleia속(屬)은 6종으로 정리된다. 이 중 2종(Nacoleia inouei Yamanaka, 1980 및 Nacoleia satsumalis South, 1901)은 우리나라에서는 처음으로 보고된다. 본 고에서는 한국산 Nacoleia속의 기록종을 중심으로 분류학적으로 정리함과 동시에 한국미기록 2종에 대하여 외부형태 및 생식기특징을 도해하고, 채집지기록 및 국내외 분포정보 등을 제시하였다.

최근 5년 동안 식물검역 현장에서 검출된 뿌리썩이선충속 선충을 분류하여 Pratylenchus crenatus, P. fallax, P. kumamotoensis, P. panamaensis, P. penetrans로 동정하였다. 이 종들의 진단형질은 구순부의 주름 수, 두부의 형태, 구침의 길이, 수컷의 유무, 측대의 구조, 수정낭의 형태, 후부자궁낭의 길이, 미부의 형태 등을 포함한다. 이들의 사진과 측정치 및 형태적 특징을 기술하였다.

In this study, nano-sized cobalt oxide powder with an average particle size below 50 nm was prepared from a cobalt chloride solution by the spray pyrolysis process. The influences of reaction temperature on the properties of the generated powder were examined. The average particle size of the particles formed based on the spray pyrolysis process at a reaction temperature of 700˚C is roughly 20 nm. Moreover, most of these particles cannot appear with an independent type, thereby coexisting in a droplet type. When the reaction temperature increases to 800˚C, the average particle size not only increases to roughly 40 nm but also shows a more dense structure while the ratio of particles which shows a polygonal form significantly increases. As the reaction temperature increases to 900˚C, the distribution of the particles is from roughly 70 nm to 100 nm, while most of the particle surface is more intricately close and forms a polygonal shape. When the reaction temperature increases to 1000˚C, the particle size distribution of the powder shows an existing form from 80 nm to at least 150 nm in an uneven form. As the reaction temperature increases, the XRD peak intensity gradually increases, yet the specific surface area gradually decreases.

We prepared ethylene vinyl alcohol (EVOH)/graphene oxide (GO) membranes by solution casting method. X-ray diffraction analysis showed that GOs were fully exfoliated in the EVOH/GO membrane. The glass transition temperatures of EVOH were increased by adding GOs into EVOH. The melting temperatures of EVOH/GO composites were decreased by adding GOs into EVOH, indicating that GOs may inhibit the crystallization of EVOH during non-isothermal crystallization. However, the equilibrium melting temperatures of EVOH were not changed by adding GOs into EVOH. The oxygen permeability of the EVOH/GO (0.3 wt%) film was reduced to 63% of that of pure EVOH film, with 84% light transmittance at 550 nm. The EVOH/GO membranes exhibited 100 times better (water vapor)/(oxygen) selectivity performance than pure EVOH membrane.

As a part of the electromagnetic spectrum, microwaves heat materials fast and efficiently via direct energy transfer, while conventional heating methods rely on conduction and convection. To date, the use of microwave heating in the research of carbon-based materials has been mainly limited to liquid solutions. However, more rapid and efficient heating is possible in electron-rich solid materials, because the target materials absorb the energy of microwaves effectively and exclusively. Carbon-based solid materials are suitable for microwave-heating due to the delocalized pi electrons from sp2-hybridized carbon networks. In this perspective review, research on the microwave heating of carbon-based solid materials is extensively investigated. This review includes basic theories of microwave heating, and applications in carbon nanotubes, graphite and other carbon-based materials. Finally, priority issues are discussed for the advanced use of microwave heating, which have been poorly understood so far: heating mechanism, temperature control, and penetration depth.