Exploring cheap and efficient oxygen evolution reaction (OER) catalysts is extremely vital for the commercial application of advanced energy storage and conversion systems. Herein, a self-supporting Co3S4/ S-doped reduced graphene oxide ( Co3S4/S-rGO) film catalyst is successfully prepared by a blade coating coupled with high-temperature annealing strategy, and its morphology, structure and composition are measured and analyzed. It is substantiated that the as-synthesized Co3S4/ S-rGO film possesses unique self-supporting structure, and is composed of uniformly dispersed Co3S4 nanoparticles and highly conductive S-rGO, which benefit the exposure of catalytic sites and electron transfer. By reason of the synergistic effect of the two individual components, the self-supporting Co3S4/ S-rGO film catalyst displays outstanding catalytic performance towards OER. As a consequence, the Co3S4/ S-rGO film catalyst delivers an overpotential of 341 mV at 10 mA cm-2, and the current attenuation rate is only 2.6% after continuous operation for 4 h, verifying excellent catalytic activity and durability. Clearly, our results offers a good example for the construction of high-performance self-supporting carbon-based composite film catalysts for critical electrocatalytic reactions.

Seawater evaporation and purification powered by solar energy are considered as a promising approach to alleviate the global freshwater crisis, and the development of photothermal materials with high efficiency is imminent. In this study, cellulose nanofiber (CNF)/MXene/Ni chain (CMN) aerogels were successfully synthesized by electrostatic force and hydrogen bond interaction force. CMN10 achieved a favorable evaporation rate as high as 1.85 kg m− 2 h− 1 in pure water, and the corresponding evaporation efficiency could be up to 96.04%. Even if it is applied to seawater with multiple interference factors, its evaporation rate can still be 1.81 kg m− 2 h− 1. The superior seawater evaporation activity origins from the promoted separation of photoexcited charges and photothermal conversion by the synergy of Ni chain and MXene, as well as the water transport channel supported by the 3D structure frame of CNF. Most importantly, CMN aerogel can maintain water vapor evaporation rates above 1.73 kg m− 2 h− 1 under extreme conditions such as acidic (pH 2) and alkaline (pH 12) conditions. In addition, various major ions, heavy metals and organic pollutants in seawater can be rejected by CMN10 during desalination, and the rejection rates can reach more than 99.69%, ensuring the purity of water resources after treatment. This work shows the great potential of CMN aerogel as a high-efficiency solar evaporator and low-cost photothermal conversion material. Cellulose nanofiber (CNF)/MXene/Ni chain (CMN) aerogels demonstrated high evaporation of water from sea water.

An environmentally friendly and low-cost chitosan-containing polysaccharide (CP) composite ZIF-8/CP was designed and prepared based on the difficulty of separating the traditional adsorbent from the water phase. ZIF-8/CP was synthesized through in-situ growth approach. The physical, chemical and structure properties of ZIF-8/CP were determined through a series of characterization methods, including SEM, FT-IR and PXRD. The effects of touch time, pH, temperature, and coexisting ions on adsorption were assessed. In addition, kinetics, isotherms of adsorption and thermodynamics were examined. The data of isotherms for adsorption indicated that the adsorption of ZIF-8/CP on MG was similar to the Langmuir model, with a maximum adsorption capacity of 1428.57 mg/g. Moreover, the kinetic parameters were consistent with the pseudo- 2nd-order equation. Thermodynamic studies (ΔG < 0, ΔH > 0) demonstrated a heat-absorbing and spontaneous adsorption process. Our study reveals that ZIF-8/CP has good adsorption properties and environmental properties.

High-quality diamond films have attracted extensive attentions due to their excellent optical and electrical properties. However, several issues, such as random orientation, stress accumulation, and slow growth rate, severely limit its applications. In this paper, high-quality polycrystalline diamond films with highly ordered (100) orientation were prepared by microwave plasma chemical vapor deposition. The effects of growth parameters on the microstructure, quality and residual stress of diamond films were investigated. Experimental results indicate that relatively high temperature at low methane concentration will promote the formation of (100) oriented grains with a low compressive stress. Optimized growth parameters, a methane concentration of 2% along with a pressure of 250 Torr and temperature at 1050 ℃, were used to acquire high growth rate of 7.9 μm/h and narrow full width at half maximum of Raman peak of 5.5 cm− 1 revealing a high crystal quality. It demonstrates a promising method for rapid growth of high-quality polycrystalline diamond films with (100) orientation, which is vital for improving the diamond related applications at low cost.

Energy storage for sustainable development and progress of power production industries is vitally important. The energy storage devices are under extensive research from last three decades to ensure the hand-on-hand coordination with power supply phenomenon and to reduce the energy loses in lines. The cost-effective materials are still highly demanding as an electrode material for energy storage devices. Biomass-derived carbon materials are best candidates due to their low cost, relatively high abundance, pollution-free nature. Here, we are reporting a facile two-step green approach to convert Himalayan horse chestnuts (HHCNs) into activated carbon materials. In first step, grinding and pyrolysis of the HHCNs were carried out, and then activation was performed using KOH to enhance the pore density and surface area. HHCNs-derived carbon was utilized as an electrode in electrical double-layer capacitors (EDLCs) with 1 M H2SO4 as an electrolyte. The macroporous structure along with hierarchical porous network acts as an efficient source of transportation of charges across the electrode and separator. Cyclic voltammetry test was taken from 10 to 100 mV/s current and within a range of 0–1 V applied potential; approximately rectangular CV shown mirror response towards current and shown typical EDLCs properties. The proximate analysis confirms the presence of heteroatoms like sulfur, oxygen, and nitrogen which act as carbon dopants. The wettability of HHCNs-derived carbon enhanced due to the various types of oxygen functionalities inherited from the lignin skeletal part. The nitrogen content is primarily responsible for the pseudo-capacitive behavior of HHCNs-codoped carbon. HHCNs-derived activated carbon materials has emerged as a promising electrode material for energy storage applications.

In this study, we synthesized a reduced graphene oxide-manganese dioxide (rGO-MnO2) composite material using a one-step hydrothermal method and used it as a transducer layer in solid-state ion-selective electrodes (ISEs) for monitoring potassium and sodium ions in sweat. The rGO-MnO2 composite was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD), revealing its unique surface morphology and crystalline structures. Electrochemical characterizations, including cyclic voltammetry (CV) and potential response testing, demonstrated the excellent performance of the rGO-MnO2 composite material as a transducer layer in ISEs. The fabricated electrodes displayed good linear responses to potassium and sodium ions, with a voltage response of 36.4 mV and 47.6 mV per unit concentration change, respectively. The electrodes also exhibited improved resistance to gas interference, such as O2, N2, and CO2. We utilized these ISEs to measure changes in potassium and sodium ion concentrations in sweat samples collected over nine days of exercise, demonstrating the practical application of the rGO-MnO2-based ISEs. This work highlights the potential of using graphene/metal oxide composites as solid contact materials in ISEs for cost-effective and stable ion sensing applications.

소형 선박(<499 GT)이 전체 선박의 46%를 지배하고 있어 상대적으로 많은 CO2 배출가스를 가지고 있다고 결론지을 수 있다. 최 적의 Trim 조건에서 운전하면 선박의 저항을 감소시킬 수 있어 온실가스가 적게 발생할 수 있다. Trim을 최적화하는 가장 저렴한 방법 중 하 나는 최적의 Longitudal Center of Gravity(LCG)를 얻기 위해 무게 분포를 조정하는 것이다. 따라서 본 연구에서는 소형 선박의 저항에 대한 LCG 변화의 영향을 경험적 및 수치적 해석을 통해 연구하고자 한다. 선체를 설계하는 Savitsky 경험식은 Maxsurf Resistance의 방법으로 사용 된다. 수치해석에는 STAR-CCM+ 상용 CFD(Computational Fluid Dynamics) 소프트웨어가 사용되지만 최종적으로 선박 설계 과정 이후 최적의 LCG를 얻기 위해 전체 저항을 비교한다. 결론적으로 Froude Number 0.56에서는 수치해석에 의해 전체 길이(LoA) 46.2%에서 최적의 LCG를 달성하고 Froude Number 0.63에서는 43.4% LoA를 달성하여 29.2% LoA에서 기준점에 비해 최대 41.12% - 45.16%의 상당한 저항 감소를 얻을 수 있다.

Since their initial development in 2012, triboelectric nanogenerators (TENGs) have gained popularity worldwide as a desired option for harnessing energy. The urgent demand for TENGs is attributed to their novel structural design, low cost, and use of large-scale materials. The output performance of a TENG depends on the surface charge density of the friction layers. Several recycled and biowaste materials have been explored as friction layers to enhance the output performance of TENGs. Natural and oceanic biomaterials have also been investigated as alternatives for improving the performance of TENG devices. Moreover, structural innovations have been made in TENGs to develop highly efficient devices. This review summarizes the recent developments in recycling and biowaste materials for TENG devices. The potential of natural and oceanic biowaste materials is also discussed. Finally, future outlooks for the structural developments in TENG devices are presented.

Abstract Purpose : To investigate the effect of the amount of astigmatism on distance and near vertical heterophoria in adults aged 20~40 years. Methods : Thirty subjects (31.25±10.21 years) were participated, and refraction was performed using I-Profilerplus and a phoropter, and horizontal heterophoria (HH) and vertical heterophoria (VH) teats were conducted at distance and near using a Torrington chart. Results : HH and VH were approximately 0.80 △ (p=0.001) and 0.20 △ (p=0.002) greater at near than at distance, respectively. Spherical refractive errors did not correlate with HH and VH at distance and near. There was no correlation between astigmatism and HH at either distance or near (p=0.141, p=0.318, respectively), but VH at distance and near was significantly correlated with astigmatism (both, p < 0.001), the amount of VH increased with increasing the amount of astigmatism. Conclusion : We found that the amount of astigmatism affected the VH at both distance and near and that the amount of VH increased with increasing astigmatism. These findings suggest that it is important to assess both astigmatism and VH in clinical practice, and that correction of astigmatism may help to reduce symptoms of VH. Key words : Astigmatism, Horizontal heterophoria, Refractive error, Vertical heterophoria

In this study, the impact load resulting from collision with the fuel rods of surrogate spent nuclear fuel (SNF) assemblies was measured during a rolling test based on an analysis of the data from surrogate SNF-loaded sea transportation tests. Unfortunately, during the sea transportation tests, excessive rolling motion occurred on the ship during the test, causing the assemblies to slip and collide with the canister. Hence, we designed and conducted a separate test to simulate rolling in sea transportation to determine whether such impact loads can occur under normal conditions of SNF transport, with the test conditions for the fuel assembly to slide within the basket experimentally determined. Rolling tests were conducted while varying the rolling angle and frequency to determine the angles and frequencies at which the assemblies experienced slippage. The test results show that slippage of SNF assemblies can occur at angles of approximately 14° or greater because of rolling motion, which can generate impact loads. However, this result exceeds the conditions under which a vessel can depart for coastal navigation, thus deviating from the normal conditions required for SNF transport. Consequently, it is not necessary to consider such loads when evaluating the integrity of SNFs under normal transportation conditions.

Abstract Purpose : The purpose of this study is to evaluate the differences and reliability of various methods for measuring Interpupillary Distance. Methods : The participants were 50 Cambodian adults (28.08±3.85 years old) without ocular disease and abnormal binocular vision. Far/near IPD was measured using Corneal reflection pupillometer, PD ruller and spotting, and calculated formula for fixation distance. Using each method, the pupil distance of both eyes was measured three times, respectively, and the average value was recorded. Results : The average value of the corneal reflection pupilometer in the distance was 63.08±3.42 mm, the average value of PD calculated formula was 62.97±3.41 mm, the average value of the PD ruler was 63.72±3.17 mm, and the average value of the spotting method was 63.89±3.15 mm. The average value of the corneal reflection pupilometer in the near was 59.85±3.23 mm, the average value of the calculated formula for fixation distance was 59.95±3.23 mm, the average value of PD ruler was 59.72±3.29 mm, and the average value spotting method was 59.47±3.23 mm. Comparison between various methods in the distance and near showed statistically significant differences (p<0.001). Conclusion : In the comparative analysis between each method, the corneal reflection pupillometer is considered to be the most accurate method, but since there is no significant difference from the average value of the Spotting method, the PD Ruler Viktorin method, and the calculated formula for fixation distance, whichever method is used, it is clinically acceptable. Therefore it is believed that each method is compatible with each other. Key words : Corneal reflection pupillometer, PD meter, PD ruler, Spotting

프리지아 ‘Ruby Star’는 농촌진흥청 국립원예특작과학원 에서 보라색 홑꽃 ‘Avilla’와 흰색 반겹꽃 ‘Medeo’를 2012년 교배하여 얻은 종자로부터 2006년 향이 좋고 개화기가 빠른 적색 홑꽃 계통을 선발하여 품종으로 개발되었다. 2014년부 터 2017년까지 생육·개화 특성검정 및 육성계통평가회의 기 호도 평가를 거쳐 선발되었으며 2018년 직무육성품종심의회 를 통해 ‘Ruby Star’로 명명되어 2021년 신품종으로 등록되 었다. ‘Ruby Star’는 빨간색(RHS, R45A) 홑꽃인 절화용 프리 지아 품종으로 개화소요일수가 118.0일이며 초장이 120.5cm 로 대조품종 ‘Rapid Red’보다 약 28.7cm 더 길다. 주당 분 지수는 5.8개로 대조품종에 비해 수확량이 많고 첫번째 분지 의 길이가 32.0cm, 두께가 3.02mm로 절화 특성이 우수하 다. ‘Ruby Star’의 소화수 및 소화폭은 각각 14.8개, 6.3cm 로 소화수가 많은 중대형화이다. 절화수명은 약 8.4일이며 주 당 자구수는 3.8개, 평균 자구중은 2.9g이다. 전자코를 이용 한 PCA 분석 결과 PC1과 PC2의 설명력은 각각 97.9%, 1.8%로 전체 변이의 99.7%를 반영했으며 ‘Ruby Star’와 대 조품종 ‘Rapid Red’는 서로 다른 향기 패턴을 보였다. Radar plot 결과 총 6개의 MOS 센서에서 ‘Ruby Star’의 센서 반응 이 ‘Rapid Red’보다 강하게 나타나 ‘Ruby Star’의 향기가 더 강한 것으로 나타났다.

Background: The compression therapy, which is the standard treatment for lymphedema patients, may be difficult to implement and contraindicated to some patients depending on their health condition. Objects: The purpose of this study is to investigate whether kinesiology taping (KT) can be used effectively and safely in the management of lymphedema as an alternative treatment through systematic review and meta-analysis. Methods: In February 2023, the literature was systematically collected through eight search engines with a combination of terms, ‘lymphedema’ and ‘kinesiology taping.’ We qualitatively analyzed the differences and safety of KT methods, and quantitatively meta-analyzed the effects of volume reduction in edema, range of motion (ROM), and pain improvement using Review Manager ver. 5. 4. To assess the risk of bias in the randomized controlled trial (RCT) studies, Risk of Bias was used. Results: A total of 616 articles searched and 20 studies were selected, including 12 RCTs and eight case studies. KT intervention could not replace multilayer compression bandage (MLB), but it demonstrated similar or better results compared to compression garment (CG), with reduced pain and improved intervention comfort. Studies reported skin adverse events ranging from 2.5% to 20.68%, with a total adverse event incidence of 7.7%. There was no significant difference in the application method of KT. As a result of the meta-analysis from the 8 RCTs, the KT intervention showed a mean difference (MD) of –7.18 with a 95% confidence interval (CI) [–12.64 to –1.72] in the volume change of lymphedema, while the pain difference was MD 0.82 with CI 95% [0.50 to 1.15], in comparison to the MLB and CG intervention. Conclusion: KT therapy led to a reduction in edema size, volume, pain, and improved ROM and quality of life. KT may be a viable option for lymphedema patients who have trouble applying traditional compression therapies.

Background: Although warm-ups before exercise are widely accepted, research on sex differences in improving hamstring flexibility is limited. Differences in the physical and physiological characteristics between males and females may result in different responses to warm-ups. Objects: This study aimed to examine sex differences in the effects of specific warm-up on hamstring flexibility. Methods: This study included 24 young adults with hamstring tightness. The participants performed five maximal knee extensions and flexions at 90° flexion of the hip, and the maximal knee extension angle was measured in real-time using a smartphone clinometer application. Results: The groups did not significantly affect the maximal knee extension angle but showed a significant effect for repetition (p = 0.002) and group-repetition interaction (p = 0.002). Males had no significant change in hamstring flexibility; however, females showed a significant increase in flexibility in the 5th trial compared with the 1st trial (p = 0.041). These results demonstrated sex-specific differences in flexibility improvement over time. Conclusion: The findings of this study suggest that specific warm-up can successfully improve hamstring flexibility in females. This may be due to various factors, such as muscle stiffness of the lower extremity, estrogen levels, and temperature sensitivity. In clinical settings, specific warm-up might be helpful for females who participate in sports or activities, such as running or jumping, which require a full range of motion in the hip and knee joints.

백합 종간 교잡종은 다양한 교배 방법에 의해 생산되어지 고 있다. 그러나 이들 종간 교잡종은 대부분 불임이다. 2n gametes는 백합에서 종간 교잡종 F1의 불임을 극복할 수 있 을 뿐 아니라 우수한 유전형질을 지닌 2n과의 교배에 이용할 수 있고 후대 다양한 유전형질을 기대할 수 있다. 따라서 본 실험에서는 가장 효과적으로 2n gametes를 생산할 수 있는 방법을 구축하기 위하여 백합 Oriental hybrids ‘Medusa’와 ‘Marco Polo’에 N2O를 처리하였다. 같은 Oriental 그룹 내 에서도 ‘Medusa’와 ‘Marco Polo’는 화뢰 크기별 감수분열 시기가 달랐다. 감수분열 tetrad 시기에 염색체를 관찰한 결 과 sequential spindles, tripolar spindles에 의해 2가지 다른 형태가 관찰되었다. ‘Medusa’에서 2atm의 N2O를 처리 한 화뢰 길이 10~15mm와 20~25mm에서 monad, dyad, triad, tetrad가 관찰되었다. 그러나 4atm에서는 tetrad 이외에는 검경 되지 않았다. ‘Marco polo’의 경우 화뢰 길 이 10~15mm, 25~30mm 시기에 2, 4atm의 N2O를 12, 24 시간 동안 처리한 구에서 모두 dyad, triad가 관찰되었다. ‘Medusa’, ‘Marco Polo’ 모두 dyad, triad, tetrad가 관찰 된 시기는 대조구에서 interphase와 metaphase Ⅰ에 해당 하는 시기이다. 화분의 모양은 타원형으로 처리 전·후 변화가 없었으며 처리 후 화분의 크기는 n 보다 큰 화분뿐 아니라 작 은 화분도 관찰되어 전체적으로 다양했다. 화분의 임성과 발 아율은 처리구별로 차이가 없었으나 평균적으로 처리 후가 무처리구보다 임성은 약 10%, 발아는 약 20% 정도 떨어졌다. ‘Medusa’와 ‘Marco Polo’를 이용하여 N2O를 처리한 것과 처리하지 않은 것을 정역 교배하였을 때 자방이 비대 되는 형 태가 2가지이었으나 처리 별 차이는 아니었다. 획득된 식물체 를 Flow cytometry로 검정한 결과, 무처리 ‘Marco Polo’와 2atm 24시간 32mm에 처리한 ‘Medusa’의 교배를 통해 하 나의 식물체에서 2배체와 3배체가 모두 나오는 mixoploid를 확인할 수 있었다. 그 외 실험을 통해 얻은 식물체 중에서 이 수체가 4개 발견되었다. 확실한 3배체를 가진 식물체는 관찰 할 수 없었다.

Background: Recently, the single-step genomic best linear unbiased prediction (ssGBLUP) method, which incorporates not only genomic information but also phenotypic information of pedigree, is under study. In this study, we performed a ssGBLUP analysis on a commercial Hanwoo population using phenotypic, genotypic, and pedigree data. Methods: The test population comprised Hanwoo 1,740 heads raised in four regions of Korea, while the reference population used Hanwoo 18,499 heads raised across the country and two-generation pedigree data. Analysis was performed using genotype data generated by the Hanwoo 50 K SNP beadchip. Results: The mean Genome estimated breeding values (GEBVs) estimated using the ssGBLUP methods for carcass weight (CWT), eye muscle area (EMA), back fat thickness (BFT), and marbling score (MS) were 7.348, 1.515, -0.355, and 0.040, respectively, while the accuracy of each trait was 0.749, 0.733, 0.769, and 0.768, respectively. When the correlation analysis between the GEBVs as a result of this study and the actual slaughter performance was confirmed, CWT, EMA, BFT, and MS were reported to be 0.519, 0.435, 0.444, and 0.543, respectively. Conclusions: Our results suggest that the ssGBLUP method enables a more accurate evaluation because it conducts a genetic evaluation of an individual using not only genotype information but also phenotypic information of the pedigree. Individual evaluation using the ssGBLUP method is considered effective for enhancing the genetic ability of farms and enabling accurate and rapid improvements. It is considered that if more pedigree information of reference population is collected for analysis, genetic ability can be evaluated more accurately.

Revolutionary advancements, such as the reduction in DNA sequencing costs and genome editing, have transformed biotechnology, fostering progress in manipulating biomolecules, engineering cells, and computational biology. Agriculture and food production have significantly benefited from tools like high-throughput microarrays, accelerating the selection of desired traits. Genetic engineering, especially utilizing genome editing, facilitates precise alterations in plants and animals, harnessing microbiomes and fostering lab-grown meat production to alleviate environmental pressures. The emergence of new biotechnologies, notably genome editing, underscores the necessity for regulatory frameworks governing LM (living modified) organisms. Global regulations overseeing genetically engineered or genome-edited (GE) organisms, encompassing animals, exhibit considerable diversity. Nonetheless, prevailing international regulatory trends typically exclude genomeedited plants and animals, employing novel biotechnological techniques, from GMO/ LMO classification if they lack foreign genes and originate through natural mutations or traditional breeding programs. This comprehensive review scrutinizes ongoing risk and safety assessment cases, such as genome-edited beef cattle and fish in the USA and Japan. Furthermore, it investigates the limitations of existing regulations related to genome editing in Korea and evaluates newly proposed legislation, offering insights into the future trajectory of regulatory frameworks.

수국은 수국과(Hydrangeaceae) 수국속(Hydrangea)의 낙엽관목 식물로 크고 화려한 화형을 가져 절화, 분화 및 조 경수로 전세계적 인기가 있는 식물이다. 나무수국은 수국 (H. macrophylla)과 비교하여 삽목율이 낮은 것으로 알려져 있지만 나무수국의 묘목생산을 위한 삽목 연구 및 두 종간 삽목율 차이 원인 규명에 관한 연구는 미미하다. 본 연구는 IBA(Indol-3-butyric acid) 500mg·L-1 처리시 삽수의 침지 시간에 따른 삽목율 조사를 통해 적정 호르몬 처리 시간을 제 시하고 나무수국과 수국의 해부학적 구조 관찰을 통한 삽목율 차이 발생의 원인을 규명하고자 실시하였다. 나무수국의 적정 호르몬 처리 시간을 규명하기 위해 IBA 500mg·L-1을 무처 리, 30분, 2시간, 4시간 침지처리를 하였다. 종간 삽목율 차이 발생의 원인 규명을 위해 나무수국과 수국의 줄기 단면과 삽 목 후 시간 경과에 따른 발근을 해부학적으로 관찰하였다. 연 구의 결과 나무수국의 삽목시 IBA 500mg·L-1에 2시간 이상 침지처리가 다른 처리구와 비교하여 발근율이 높고 발생 뿌리 수가 가장 많았다. 또, 나무수국의 삽목율이 수국과 비교하여 낮은 것은 줄기의 세포 구조상 방사조직의 형태, 섬유세포의 밀도, 도관의 발달, 전분 함유 세포의 수 등에 차이가 관찰되 었고 이러한 세포 구조적 차이들의 영향으로 나무수국이 수국 보다 삽목 후 뿌리 조직 세포분열이 7일 늦게 시작되는 것이 확인되었다. 본 연구의 결과로 나무수국의 삽목 번식의 기초 자료로 활용되어 묘목 생산 효율 증대에 활용되길 바란다.

The primary therapeutic approach for Brucella species infections has mainly been based on antibiotic treatment. However, the development of vaccines for brucellosis control remains controversial. Furthermore, there is currently no licensed vaccine available for human brucellosis. This study aims to evaluate the effect of a combination of recombinant protein vaccines against Brucella (B.) abortus infection using a mouse model. Two B. abortus genes, namely dapB and gpm, were cloned and expressed in competent Escherichia (E.) coli DH5α using the pCold-TF vector. Successfully cloned vectors were subjected to PCR amplification using specific primer pairs. The apparent sizes of dapB and gpm were detected at 807 bp and 621 bp, respectively. Besides, the purified recombinant proteins dapB and gpm were detected using SDS-PAGE electrophoresis with correct sizes of 82.86 kDa and 87.61 kDa, respectively. These recombinant proteins were used to immunize mice as a combined subunit vaccine (CSV) to elicit host immunity against B. abortus infection. Mice immunized with CSV exhibited increased proliferation of CD4+ and/or CD8+ T cells at week 7th and 9th before sacrifice, in comparison to the control group. Notably, CSV immunization showed a significant decrease in bacterial burden in the spleen compared to the control group. Altogether, CSV using dapB and gpm induced host adaptive immune response against Brucella infection, suggesting its potential as an effective new subunit vaccine candidate.

PURPOSES : There has been increasing interest in South Korea on warm-mix asphalt (WMA) and cold-mix asphalt (CMA) technologies that allow production of asphalt pavement mixtures at comparatively lower temperatures than those of hot-mix asphalt (HMA) for use in pavement engineering. This study aims to evaluate the feasibility of replacing HMA pavement with WMA pavement with the goal of reducing CO2 emissions associated with asphalt production for road construction. METHODS : Changes in the dynamic modulus characteristics of WMA and HMA according to short-term and long-term aging were evaluated. In addition, the effects of water damage were evaluated for short- and long-term aging stages. RESULTS : For WMA, in the process of mixing and short-term aging, early-age dynamic modulus decreased owing to low temperature and reduced short-term aging (STA) time. This could result in early damage to the asphalt pavement depending on the applied traffic load and environmental load. CONCLUSIONS : Mastercurves of the dynamic modulus were used for comparative analysis of WMA and HMA. Compared to the dynamic modulus after STA of HMA, the estimated aging time determined by experiments for WMA to achieve the required stiffness was more than 48 hours, which is equiva-lent to approximately 4 to 5 years real service life when converted. It is considered that further studies are needed for performance optimization to achieve early-age performance of the asphalt mixes.