Silage inoculants, crucial in modern silage production, comprise beneficial microorganisms, primarily lactic acid bacteria (LAB), strategically applied to forage material during ensiling. This study aimed to compare the effectiveness of various inoculants produced by different companies. Five treatments were evaluated, including a control group: T1 (Lactobacillus plantarum), T2 (Lactobacillus plantarum + Pediococcus pentosaceus), T3 (Lactobacillus plantarum + Pediococcus pentosaceus + Lactobacillus buchneri), T4 (Lactobacillus plantarum + Lactobacillus acidophilus + Lactobacillus bulgaricus), and T5 (Lactobacillus plantarum + Pediococcus pentosaceus + Enterococcus faecium). Italian ryegrass was harvested at the heading stage and treated with these silage inoculants. Samples were collected over a 60-day ensiling period. Co-inoculation with L. plantarum and P. pentosaceus (T2) resulted in significantly higher CP compared to the control group co-inoculation exhibited with resulted in Lactobacillus plantarum and Pediococcus pentosaceus in the T2 treatment exhibited higher CP content of 106.35 g/kg dry matter (DM). The T3 treatment, which included heterofermentative bacterial strains such as Lactobacillus buchneri, exhibited an increase in acetic acid concentration (11.15 g/kg DM). In the T4 treatment group, which utilized a mixed culture of Lactobacillus acidophilus and Lactobacillus bulgaricus, the NH3-N/TN content was observed to be the lowest (20.52 g/kg DM). The T5 containing Enterococcus faecium had the highest RFV (123) after 60 days. Expanding upon these findings, the study underscores not only the beneficial effects of particular inoculant treatments on silage quality but also underscores the potential of customized inoculation strategies in maximizing nutrient retention and overall silage preservation.

Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH3-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.

This experiment was conducted to confirm the possibility of preparing Sorghum×sudangrass hybrid artificial hay using far-infrared rays in Korea. The machine used in this experiment is a drying device based on far-infrared rays, and is designed to control temperature, air flow rate, far-infrared radiation amount, and air flow speed. The Sorghum×sudangrass hybrids harvested in late September were wilted in the field for one day, and a drying test was performed on them. Conditions for drying were performed by selecting a total of 7 conditions, and each condition induced a change in radiation amount in a single condition (42%) and two steps (4 treatments) and three steps (2 treatments). The speed of the air flow in the device was fixed at 60 m/s, and the run time was changed to 30, 60, and 90 minutes. The average dry matter (DM) content was 82.84%. The DM content was 59.94 and 76.91%, respectively, in drying conditions 1 and 3, which were not suitable for hay. In terms of drying rate, it was significantly higher than 80% in the 5, 6 and 7 treatment, and power consumption was slightly high with an average of 5.7 kw/h. As for the feed value according to each drying condition, the crude protein (CP) content increased as the drying time increased, and there was no significant difference between treatments in ADF, NDF, IVDMD and TDN content. In terms of RFV, treatment 1, which is a single condition, was significantly lower than the complex condition. Through the above results, it was determined that the drying conditions 4 and 5 were the most advantageous when considering the drying speed, power consumption, and quality.

본 시험은 우리나라에서 원적외선을 이용한 이탈리안 라이그 라스 인공건초 조제 가능성을 확인하기 위해 수행되었다. 본 시험 에 사용된 기계는 온도, 송풍량, 원적외선 방사량을 조절할 수 있 는 원적외선 건조기로 5월에 수확한 이탈리안 라이그라스를 대상 으로 실시하였다. 건조를 위한 조건은 전체 9개의 조건을 선택하 여 수행하였으며 각각의 조건은 방사율 42∼45 %로 설정을 하였 으며 내부 온도는 65℃로 설정하였다. 기기내의 기류의 속도는 40 ∼60m/s로 하였으며, 전체적인 건조시간은 방사량 42%는 30분, 43%는 25분 그리고 45%는 20분으로 하여 수행하였다. 각각의 건조조건에 따른 최종 건물함량은 평균 88.5%로 나타났으며 전 처리에서 건초에 적합한 건물함량을 나타내었다. 건조 조건에 따 른 전력 소비량을 보면 45% 방사량에서 20분간을 건조한 처리구 에서 가장 낮게 나타났다. 건조율에 있어서는 1∼5번 건조 조건에 서는 차이가 없었으나 6∼7조건에서는 유의적으로 낮은 경향을 보였다. 사료가치에 있어서는 대부분의 건조조건에서 원물보다 CP, IVDMD는 높았고 ADF, NDF 함량은 낮게 나타났으며 대체 적으로 4, 7 및 8번 건조 조건에서 높은 경향을 보였다. 이상의 결과를 통하여 건조속도, 전력량, 품질 등을 고려할 때 7 및 8번 건조조건이 가장 유리한 것으로 판단되었다.

This experiment was conducted to evaluate the growth characteristics and productivity of silage corn varieties developed in Korea. Corn cultivation was carried out using the experimental field in the Pyeongchang campus of Seoul National University (550 m above sea level). There have 10 domestic cultivars (Gwangpyeongok, Dacheongok, Yanganok, Jangdaok, Cheongdaok, Daanok, Sinhwangok, Sinhwangok Ⅱ, Pyeonggangok, and Hwangdaok) with one imported cultivar (P1543) which tested as a control, and randomized block design with three replications. Among the 100-grains weight of the seeds, Dacheongok was the heaviest, and the germination rate for each variety was 74.6% on average, while that of Daanok and Sinhwangok were over 90%. Sinhwangok was the fastest in tasseling and silking date. The number of days required to be silking date was as slow as 85 days in Dacheongok, Cheongdaok and Pyeonggangok, and as fast as 80 days or less in Sinhwangok, Sinhwangok Ⅱ and Hwangdaok. The plant height of P1543 was the highest as 344cm, and Hwangdaok and Daanok were short. In terms of the ratio of ears, Daanok had the highest rate of 60.18%, and Jangdaok and Dacheongok had the lowest. There was no significant difference in dry matter content in stover, but P1543 was generally higher in ear and total dry matter content. The dry matter yield was highest in P1543, and the yield of TDN was significantly higher in P1543 and Yanganok. There was a significant difference in the crude protein content of ears and the dry digestibility of stems (p<0.05), while there was no significant difference in the content of each part or element. Combining the above results, Yanganok was the highest in terms of yield, and Dacheongok, Sinhwangok and Pyeonggangok were also recommended for domestically grown corn varieties in the mountainous regions of Gangwon-do.

본 시험은 사료용 벼의 생산 및 이용 확대를 위해 한우에 대한 급여 효과를 규명하는 것을 목적으로 수행되었다. 경기도 평택에서 생산된 사료용 벼를 활용하여 TMR 사료를 조제하였고 한우 육성우 16두를 대상으로 29개월령까지의 생장능력과 육질특성 변화를 조사하였다. 생산된 사료용 벼 사일리지는 수분함량이 64.02%, 조단백질 함량이 7.54%로 나타났으며 육성기에는 약 45% 정도를 배합하였고 비육기(전기, 중기 및 후기)에는 각각 35, 15 및 9% 로 낮추어 배합하였다. 체중은 WCR-TMR 급여구가 비육중기와 후기에 대조구에 비해 유의적으로 무거웠고, 종료시(29개월령)는 대조구가 631 kg/head 였으나 WCR-TMR급여구는 647 kg/head 로 무거웠다. 일당증체는 육성기와 비육전기에 WCR-TMR급여구가 유의적으로 높았으며 비육중기 및 후기는 차이가 없었다. 전 기간에 있어서는 0.71 vs 0.75 kg/head/day 로 WCR-TMR급여구가 높게 나타났다. 육량에 있어서는 대조구의 등지방 두께(11.7 mm)가 WCR-TMR급여구(9.3 mm)보다 유의적으로 두껍게 나타났다(P<0.05). 등심단면적, 도체중 및 육량지수에서는 차이가 없었다. 육질에 있어서는 Marbling score가 WCR-TMR급여구에서 높게 나타났으며(P<0.05), 육색, 지방색, 조직감 및 성숙도에 있어서는 유의적인 차이가 나타나지 않았다. 이상의 결과를 종합하여 볼 때 사료용 벼 위주 TMR 급여는 가축의 생산성을 개선시켰으나 육질에 있어서는 큰 차이를 보이지 않았다. 따라서 조사료 사정이 열악한 나라에서는 사료용 벼의 생산 및 이용이 필요한 것으로 판단된다.

These experiments were to investigate the variations of rye on forage quality, productivity and β-carotene concentration affected by maturity in Pyeongchang region. Limited information are available about how forage quality and β-carotene content are affected by various factors. Samples were collected from rye harvested every 5 days, from April 25 to May 31 (April 25, April 30, May 4, May 9, May 15, May 21, May 25 and May 31). Dry matter (DM) content, plant height, DM yield and total digestible nutrient (TDN) yield increased continuously with the progressed maturity. However, crude protein (CP) content, in vitro dry matter digestibility (IVDMD) and relative feed value (RFV) decreased markedly with the delay of harvesting, while TDN content decreased from April 25 till May 15, then followed by a stable fluctuation. Conversely, acid detergent fiber (ADF) and neutral detergent fiber (NDF) value increased and then fluctuated slightly after blooming stage. For quality of plant parts, stem contained the lowest CP content and RFV value, and the highest ADF and NDF contents compared with other parts, while the grain showed the higher CP, IVDMD, RFV and lower fiber contents than others. With the plant matured, leaf proportion decreased while stem and grain proportion increased, and feed value of all the three parts decreased till blooming stage and followed by a stable phase. β-carotene concentration showed its highest on jointing stage, and then fell down sharply on the sequential stages. In conclusion, harvest around May 15 (blooming) is proper for forage rye if directly consumed by livestock as green chop in Pyeongchang under the consideration of both nutritive yield and forage quality.