본 연구에서는 선별파쇄 골재 등 부순 골재에 포함된 토분함유량 규정치를 정하는 연구의 일환으로써 골재 토분이 모르타르의 기초적 특성에 미치는 영향을 분석하였다. 토분함유량이 증가할수록 유동성과 휨강도는 감소하고, 공기량은 증가하며 압축강도는 1 % 전후에서 증가하는 경향도 나타났으나 전반적으로 감소하였다.

본 연구에서는 플라이애시가 다량치환된 모르타르에 알칼리 활성화를 통한 강도증진을 양생온도 및 양생방법 변화에 따라 비교 분석하였다. 연구 결과로 플라이애시를 60 % 과다치환한 경우 소생재 도포 후 40℃의 온도로 48시간 기중양생을 실시한다면 OPC의 28일 압축강도에 근접하게 발휘되는 것이 얻어졌다.

본 연구에서는 외기온 영하조건에서 노출시간 변화별 콘크리트의 초기동해 피해를 입는 온도이력을 확인하고, 실험연구결과 –10℃인 외기조건에서 200 mm 두께의 슬래브는 18시간까지는 외기온에 노출되어도 콘크리트의 수화열에 의해 초기동해 피해가 발생하지 않는 것을 알 수 있었다.

본 연구에서는 Durometer A타입으로 응결시간에 확실하게 차이를 나타낼 수 있는 플라이애시(이하 FA) 치환 콘크리트에서 프록터 관입저항 시험치와 경도치를 비교 분석하고자 하였다. 연구결과로 프록터 관입저항 시험치와 Durometer A타입의 경도치는 곡선의 형태로 높은 상관관계를 나타내었다. 표면 마감작업에 대하여 Durometer A타입의 경도치로 약 25 HD는 초결, 약 35 HD는 종결로 관리한다면 표면 마감작업시간 판정에 효과적일 것으로 사료된다.

This study was conducted to compensate for the decrease in intensity due to the decrease in temperature and proposed temperature correction strength T28, using the Fractional function model.

As a result of this study, the testor penetration resistance and the hardness of the durometer are considered highly correlated and are thought to be effective when using the durometer to determine the setting time in the field structure.

This study was conducted to propose a strength correction factor to compensate the strength delay at designed age caused by the temperature drop in low temperature condition. Strength correction factors due to temperature drop T28 were provided using the constant function model.

In this study, the mechanical properties of concrete incorporating blast furnace slag with 60 % were analyzed according to CBS-Dust replacement rate. Results indicate that replacement of more than 10 % of CBS-Dust have a positive effect on reducing waste disposal costs and strength improvement

In this study, as series of studies to provide how to apply coal gasification slag(CGS) as one of byproducts for high strength concrete, from a newly introduced power generation method in Korea, the possibility of using a mixed aggregate with 25 percent of CGS as a concrete residual were investigated. The results indicated that the compressive strength of concrete using CGS at early age was lower than that using CS, but compressive strength at 28 days showed similar levels of strength enhancement.

In this study, the temperature correction strength (Tn) was conducted to propose (Tn) according to the management age of structural concrete that is separated from the average curing temperature of 4°C to 17°C in cold conditions. After reviewing the strength difference of the concrete using fly ash as a combined material at W/C 50%, the temperature correction strength (Tn) is proposed. The temperature correction strength was proposed to compensate for differences with standard curing conditions due to decrease in curing temperature from 28th, 42nd, 56th and 91st of the models interpreted as equivalent age methods.

This study is a basic study to CGS, which originates from the IGCC, as fine aggregate for concrete. The study measured density, water absorption ratio, solid volume percentage for grain shape, fineness modulus, grading curve of physical properties of fine aggregate. As a result, the density and solid volume percentage for grain sheet were found to be satisfactory in the aggregate for content (KS F 2527).Water evaluation ratio, fitness modulus, and grinding curve did not meet KS standards. Therefore, it is deemed necessary to adjust the grain size through sieving in case of fineness modulus and grinding curve.

This study was conducted to improve the economy, quality, and load of Soil paving concrete by using waste materials such as Oystery and Dolomitic to solve strength reduction and durability reduction caused by hardening agents in Korea. According to the results of the study, for the curing expenses, the Fine part agreement (FC) and the Furnace slag power lower (BS) are 5:5, It was possible to verify that the best results were obtained in terms of the quality of cement mortar when the natural organic lime and dolomitic lime were mixed at a ratio of 5:5.

In this study, a series of studies is intended to elicit the improvement of the quality of Admixture Substitute Concrete using oil refined for petrochemical work (ERCO). In other words, ERCO is used to analyze the basic properties of Admixture Substitute Concrete by pre-adding the AE liquid solution on its products. As an experimental variable, the method of adding ERCO was added after mixing it with concrete. In addition, the mixing ratio was planned to be 2 levels of 0, 0.5 %, and the total volume of the AEs injection quantity is 5 % that combines 0, 1, 2, and 3 % of the mixed ERCO mass of concrete. As a result, as the pre-injection of AE was increased, the characteristics of the concrete showed that the slump, and air contents were not improved, and the pre-adopting effects of AE agent were also significantly increased in the concrete.

In this study, the correlation between the durometer and the proctor penetration resistance tester, which is considered to be efficient in determining the setting time in a simple portability for soil and concrete utilizing organic lime (H) and Goto lime (G), is used. The results of the study show a high correlation between the portable hardness meter, the durometer and the proctor penetration resistance test period. Therefore, it is expected that the durometer will be useful for the measurement of setting time and the time limit.

In this study, the correlation with a proctor penetration resistance tester is analyzed for the purpose of judging the setting time of concrete by the convenient portability of the durometer which is a rubber hardness meter.The result of this study showed a high correlation between the value of the tilt of the durometer and the measured value of the proctor penetration resistance tester.

This study is a basic review of the use of CGS generated in IGCC as a fine aggregate for concrete, and a basic feature of cement mortar was considered. The analysis shows that CGS and CS mix ratio is best when the CGS is mixed at about 0~50 % On the basis of workability and strength improvement effects. This is expected to contribute to the strength, workability, and quality improvement of concrete given the optimal mixing of CGS.

In this study, concrete slab with insulation and non-insulated formwork was used to monitor and control its strength using a wireless sensor network with equivalent age method. As a result, the temperature and compressive strength of the structures were monitored without any problems, which revealed a good management tool.

In this study examined the strength of wall concrete using insulated molds and non-insulated forms by monitoring the strength of the structure using a wireless sensor network by maturity method. It was confirmed that the temperature and compressive strength of the structures are monitored in real time, along with effective strength control.

In this study, the purpose of the study is to determine the depth of damage caused by early frost damage in concrete slab structures under the conditions of external temperature during winter. In other words, we intend to analyze the depth variation of the early frost damage as the thickness of the concrete slab member changes under the condition of the 3-component binder frequently used in practice. As a result, the thinner the component, the significantly reduced the overall temperature of the concrete. In addition, the thinner the component thickness, the higher the delay in increasing the brightness of the core collected from the concrete member, and the greater the effect on the depth of the early frost damage was on the thinner the component thickness.

뇌록은 조선시대 건축물의 바탕칠(가칠)에 사용된 녹색 안료이며, 불국사 대웅전 등 주요 건축물의 단청에 사용되었다. 본 연구에서는 한국 전통 안료 원료인 뇌록을 이용하여 소성온도에 따른 광물학적 특성 변화를 살펴보았다. 포항 뇌성산 일대에 국부적으로 산출하고 있는 뇌록은 주구성 광물이 셀라도나이트(celadonite)이며, 주요 구성 원소는 Fe, Si, K, Mg 등으로 주로 Fe가 풍부한 운모류임을 알 수 있다. 105℃~1000℃까지 단계적 소성실험 결과, 색상이 녹색 → 담녹색 → 갈색 → 적색으로 변하였으며, 열분석에서는 616℃ 부근에서 결정수의 탈수작용에 의한 흡열반응이 확인되었다. 광물의 변화는 600℃ 이상에서 결정면[(11-1), (02-1)]이 붕괴되고, 1000℃ 이상에서 철산화물이 형성되었다. 따라서 뇌록의 정출 온도가 600℃ 이하인 것으로 추정되며, 셀라도나이트만이 확인되는 것으로보아 Stage I 단계만의 변질을 겪은 것으로 판단된다.