본 연구는 에너지 저장 응용을 위한 PVI-PGMA/LiTFSI 고분자 막 전해질 및 CxNy-C 유연 전극의 합성 및 특성 에 관한 연구이다. 이중 기능을 갖는 PVI-PGMA 공중합체는 우수한 이온 전도성을 나타내었으며, PVI-GMA73/LiTFSI200 막 전해질은 1.0 × 10-3 S cm-1의 최고 전도도를 달성하였다. CxNy-C 전극의 전기화학적 성능을 체계적으로 분석하였으며, C3N2-C는 나노와이어와 다면체로 구성된 높은 연결성을 갖는 하이브리드 구조와 이중 Co/Ni 산화물을 포함하여 풍부한 산 화환원 활성 부위와 이온 확산을 용이하게 하는 특징으로 인해 958 F g-1의 최고용량 및 최소한의 전하 전달 저항(Rct)을 달성 하였다. 흑연 탄소 껍질의 존재는 충전-방전 동안 높은 전기화학적 안정성에 기여하였다. 이러한 결과들은 고성능 에너지 저 장 장치인 슈퍼커패시터 및 리튬 이온 전지와 같은 첨단 에너지 저장 장비에 PVI-PGMA/LiTFSI 고분자 막 전해질과 CxNy-C 전극을 활용하는 잠재력을 보여주었으며, 지속 가능하고 고성능의 에너지 저장 기술을 더욱 발전시키는 길을 열어가 고 있다.

In this study, the effects of Sm addition (0, 0.05, 0.2, 0.5 wt%) on the microstructure, hardness, and electrical and thermal conductivity of Al-11Si-1.5Cu aluminum alloy were investigated. As a result of Sm addition, increment in the amount of α-Al and refinement of primary Si from 70 to 10 μm were observed due to eutectic temperature depression. On the other hand, Sm was less effective at refining eutectic Si because of insufficient addition. The phase analysis results indicated that Sm-rich intermetallic phases such as Al-Fe-Mg-Si and Al-Si-Cu formed and led to decrements in the amount of primary Si and eutectic Si. These microstructure changes affected not only the hardness but also the electrical and thermal conductivity. When 0.5 wt% Sm was added to the alloy, hardness increased from 84.4 to 91.3 Hv, and electric conductivity increased from 15.14 to 16.97 MS/m. Thermal conductivity greatly increased from 133 to 157 W/m·K.

Titanium dioxide (TiO2) is a typical inorganic material that has an excellent photocatalytic property and a high refractive index. It is used in water/air purifiers, solar cells, white pigments, refractory materials, semiconductors, etc.; its demand is continuously increasing. In this study, anatase and rutile phase titanium dioxide is prepared using hydroxyl and carboxyl; the titanium complex and its mechanism are investigated. As a result of analyzing the phase transition characteristics by a heat treatment temperature using a titanium complex having a hydroxyl group and a carboxyl group, it is confirmed that the material properties were different from each other and that the anatase and rutile phase contents can be controlled. The titanium complexes prepared in this study show different characteristics from the titania-formation temperatures of the known anatase and rutile phases. It is inferred that this is due to the change of electrostatic adsorption behavior due to the complexing function of the oxygen sharing point, which crystals of the TiO6 structure share.

There has been much interest in recycling electronic wastes in order to mitigate environmental problems and to recover the large amount of constituent metals. Silver recovery from electronic waste is extensively studied because of environmental and economic benefits and the use of silver in fabricating nanodevices. Hydrometallurgical processing is often used for silver recovery because it has the advantages of low cost and ease of control. Research on synthesis recovered silver into nanoparticles is needed for application to transistors and solar cells. In this study, silver is selectively recovered from the by-product of electrodes. Silver precursors are prepared using the dissolution characteristics of the leaching solution. In the liquid reduction process, silver nanoparticles are synthesized under various surfactant conditions and then analyzed. The purity of the recovered silver is 99.24%, and the average particle size of the silver nanoparticles is 68 nm.

Poly-methylmetacrylate (PMMA) is mainly applied in the plastic manufacturing industry, but PMMA is weak and gradually got discolor. The strength of PMMA can be improved through organic-inorganic hybrid nano composites with inorganic nano particles such as, SiO2 or ZrO. However, inorganic nano particles are mostly agglomerated spontaneously. In this study, the zeta potential is controlled using different types of organic solvent with different concentrations, dispersibillity of SiO2 nano particles on the PMMA particle are analyzed. When 3 M acetic acid is used, absolute value of the zeta potential is higher, SiO2 nano particle is well attached, and dispersed on the PMMA particle surface. Results indicate that the absolute value of the zeta potential affects the stability of SiO2 dispersion.