In this study, the abnormal noise phenomenon generated intermittently in the shock absorber of the combat armored vehicle was approached from the side of the squeak joint to solve the phenomenon. In order to identify the cause of the noise, the factors causing friction in the shock absorber were checked from the viewpoint of problem product analysis, process, and design. As an improvement plan, by improving the non-lubricated section in the nitrogen chamber, the operating noise was reduced to a level lower than that of a general automobile engine along with the elimination of noise. Considering that this is a combat vehicle, it is judged that it has been improved so as not to affect the survivability and health of the crew during equipment operation. Through the improvement of this study, it is expected to prevent power loss and improve the emotional quality of our soldier.

Combat-armored vehicles were equipped with an automatic-fire-extinguishing system to ensure the safety of the crew and vehicle from fires on the vehicle. When a fire was occurred, the automatic-fire-extinguishing system automatically detects the fire through sensors and detection lines, sprays a fire extinguisher, and notifies the crew visually and audibly. Recently, there had been cases of automatic-fire-extinguishing systems malfunction on combat-armored vehicles. In this study, in order to resolve the automatic-fire-extinguisher's malfunction phenomenon, ground noise and inter-circuit noise generated from the fire detection line were identified, and the resistance connected on the circuit was revised to remove noise. As a result of resistance revision, the noises was eliminated and the electromotive force difference between input circuits was made constant, thereby improving the malfunction of the automatic-fire-extinguishing system. By applying the result, it was confirmed that the control device sensed a temperature similar to the actual temperature on actual vehicles, and it was confirmed that the automatic-fire-extinguishing system's malfunction phenomenon was not founded in the field vehicles after then.

Combat vehicles were developed in two types depending on the purpose of operation. The body of the vehicle is relatively large welded structure, and there is a quality problem in that welding deformation occurs in a certain area. Welding deformation is a problem that is inevitably generated during the welding process, and additional corrective work is performed. However, due to the structural characteristics of the welded structure of combat vehicl, there are many limitations in the correction method, which lowered the productivity. To improve this problem, we intend to establish improvement measures through analysis of the areas where welding deformation occurs and apply corrective measures suitable for welding structures of combat vehicles. For the design improvement plans, the finite element analysis were used and the correction method were applied to simulated structure to confirm the possibility. Finally, the improvement effect was confirmed by manufacturing the actual welded structure. Based on the results of this study, it is expected that the productivity of related similar welding structures as well as structures of wheeled armored vehicles, can be improved.