In this study, we measured the concentration of total volatile organic compounds (TVOCs) in four different seasons from 2016 to 2017 in order to determine seasonal variation of indoor air quality in relation to public transportation modes (subways, trains, and express buses). The measurement was carried out both during rush hour when traffic was congested as well as during non-rush hour when traffic was not congested. Effects by season, degree of congestion, and characteristics of public transportation were analyzed on the basis of 295 items of data during the periods of congestion and 295 items of data during the periods of non-congestion. The average TVOCs concentration in winter was the highest with 226.4 μg/m 3 . The average TVOCs concentration on an express bus was the highest with a seasonal average of 142.3 μg/m 3 . The TVOCs concentration in the period of congested traffic was higher than in the period of non-congested traffic for all public transportation modes. For the average TVOCs concentration by season and transportation, there was no data that exceeded the guidelines regarding maintaining indoor air quality. However, 2.5% of all sample measured data (TVOCs) exceeded the guidelines regarding maintaining indoor air quality. Therefore, the continuous monitoring of public transport vehicles is required.

스트론튬계 상전이물질은 특정한 온도에서 물질의 상태가 변함에 따라서 열을 흡수하거나 방출하게 된다. 본 연구의 목적은 스트론튬계 상전이물질의 혼입이 플라이애시 치환 모르타르 및 고로슬래그 치환 모르타르의 수화발열 및 역학적 특성에 미치는 영향을 실험적으로 평가하는 것이다. 스트론튬계 상전이물질의 혼입량은 결합재 질량의 1, 2, 3, 4, 5%로 하였다. 총 12개 수준의 모르타르 배합에 대해서 모르타르 흐름성능, 간이수화열온도상승, 압축 및 휨강도 실험을 각각 수행하였다. 실험결과 본 연구에서 사용한 스트론튬계 상전이물질은 모르타르의 수화열 저감 및 수화지연에 효과적인 것으로 판단된다. 특히 플라이애시 치환 모르타르의 최대온도 상승량은 고로슬래그 치환 모르타르의 최대온도 상승량에 비해 낮게 나타났다. 플라이애시 및 고로슬래그 치환 모르타르의 압축강도는 상전이물질 혼입량이 증가함에 따라 감소하는 것으로 나타났다.

This test was performed to verify the behavior of coupling beam using T-shaped steel for alternation of reinforcement details.

This test was performed to verify the failure mode of coupling beam using T-shaped steel for alternation of reinforcement details.

Coupling beam using L-shaped steel for alternation of reinforcement details was tested to evaluate energy dissipation capacity.

In recent year to improve the seismic behavior of conventional link beams, some efforts have been made by providing special reinforcement material, or using steel link beams as substitutes. In this study to facilitate the constructability and meanwhile ensure desirable seismic behavior, an innovative type of replaceable steel frame link beam was conceived and studied

Coupled shear wall systems, which consist of two or more in-plane shear walls interconnected with link beams, are frequently used in medium and high-rise buildings. In this study, an innovative type of replaceable steel angle for link beam, was conceived and studied.

As viable substitutes for reinforced concrete link beam, the use of alternlate link beam and composite coupling beams have also been investigated by several researchers. In this study to enhance the post-damage repair capability of the link beam, a different type of replaceable link beam with angle connection was investigated.

The study is aims at determining mechanical properties of pva fibers reinforced cement composite with recycled materials to overcome problems of plain concrete. The cement composites were evaluated using different ratio of recycled materials

When substation structures are designed, it is important to investigate the design, construction and maintenance plans to enhance the endurance for chloride environment, freezing and electrochemical attack. The research is conducted to investigate intended service life of reinforced concrete substation structures.