The aim of this paper is to consider the effect of the manufacturing processes on corrosion and centerline cracking of ancient bronze spoons. The ancient bronze spoons in question were made by several steps of forging, in reheated condition with cast ingots. The manufacturing method is similar to that of the modern spoons. The investigations include observations from light and scanning electron microscopes of the microstructure in terms of the crack propagation. Cracks in the centerline are caused by solute segregation in the center-line region; this solute is solidified in the final stage of bronze spoon manufacture. Centerline cracking is also caused by α phase segregation, accompanied by forged overlapping along the longitudinal direction of the spoons. A vertical stripe with cracks along the centerline of the spoon’s width is formed by folding in the wrought process. The overlapping area causes crack propagation with severe corrosion on the spoon surfaces over a period of a thousand years. The failure mechanisms of ancient bronze spoons may be similar to that of modern spoons, and the estimation of the failure mechanisms of ancient spoons can be appropriate to determine failure causes for such modern spoons.

Microstructural analysis of a (α+β) Ti alloy was investigated to consider phase transformation in each step of thethermo-mechanical process using by SEM and TEM EDS. The TAF (Ti-6Al-4Fe) alloy was thermo-mechanically treated withsolid solution at 880oC, rolling at 880oC and annealing at 800oC. In the STQ state, the TAF microstructure was composedof a normal hcp α and metastable β phase. In a rolled state, it was composed of fine B2 precipitates in an α phase, whichhad high Fe segregation and a coherent relationship with the β matrix. Finally, in the annealing state, the fine B2 precipitateshad disappeared in the α phase and had gone to the boundary of the α and β phase. On the other hand, in a lower rollingtemperature of 704oC, the B2 precipitates were more coarse in both the α and the boundary of α and β phase. We concludedthat microstructural change affects the mechanical properties of formability including rolling defects and cracks.

Metastable phase characteristics of beta Ti alloys were investigated to consider the relationship of the microstructureand diffraction pattern in TEM. TEM analysis showed that the microstructure was mottled as a modulated structure, and thediffraction pattern was composed of spot streaks between the main spots of a stable beta phase with a specific latticerelationship. The modulated structure may be induced by short distance slip or atom movement during a very short intervalof solution treated and quenched (STQ) materials. The athermal ω phase, which could be precipitated at low temperature aging,is also analysed by the metastable phase. The metastable phases including athermal ω phase had a common characteristic ofhardened and brittle behavior because the dislocation slip was restricted by a super lattice effect due to short distance atommovement at the metastable state.