The aging of Korea is rapidly advancing in an unprecedented rate in the world. Indoor and outdoor safety accidents involving the elderly frequently occur, with elderly population increasing. Because the physical strength of elderly is decreased, it is necessary to develop devices that aid the everyday life of the elderly to prevent safety accidents. Among many activities, the motions of standing from and sitting on a chair require much physical strength from particular body parts, which causes an overload for particular body parts. To the elderly the repeating motion of standing from and sitting down on a chair is burdensome, because they do not have enough physical strength compare to young persons . As a result the elderly could be injured or falling during standing or sitting. Therefore, the development of a lift chair that considers the problems mentioned above is necessary to prevent the safety accidents of the elderly. The study designed a non-motorized lift chair that comfortably aids the standing and sitting down motion for the use of the elderly by reflecting the anthropometric data of the Korean elderly over 65 years old. Also the design was implemented to smoothly aid the standing motion by considering the knee angle of the elderly when standing. Because the regained strength to stand from a chair is depend on the knee angle. Unlike existing lift devices, this device utilizes a tilting mechanism that does not use electric power so that the product could be composed inexpensively than existing chairs released in the market.

With the increase in elderly population rate, interest in development of equipment to aid for the elderly activities has been increased. Since the physical features of repetitive behavior of elderly people standing and sitting can cause the stress on certain parts of the body, The necessity of developing Lift Chair concerning the foregoing problem has been to the fore. In this study, we set the average body size of the elderly aiming to develop non-motorized Lift Chair, developed Non-motorized tilting mechanism based on the Muscle strength change at knee angle, and did a study relatively inexpensive Lift Chair considering esthetic and practicality.

개의 인공수정에 사용할 정자의 보존방법을 확립하기 위하여, 동결속도와 응해 온도를 설정하여 적절한 동결방법을 정립하고자 본 실험을 실시하여 다음과 같은 결과를 얻었다. 동결의 방법에 있어서는 액체질소의 표면으로부터 17 cm 높이에서 동결하는 -3/min의 동결속도로 실시하여 37에서 2분간 응해하는 방법이 가장 좋은 결과를 보였다. 생존성과 운동성에 있어서의 차이는 없지만 첨체의 intact한 비율은 약간 낮은 결과를 보였으며, 이의 보완을 위해, 액

본 연구는 최근 형질전환동물의 생산 및 복제동물 생산에 이용되고 있는 핵이식 기법을 시행할 때 재조합된 핵이식란의 활성화를 위해 널리 적용되고 있는 6-dimethylaminopurine (DMAP)의 활성화 효율과 근래에 제기되고 있는 단위발생란의 비정상적인 염색체 및 핵형에 대해 알아보고 적합한 활성화 유도물질을 찾고자 시행되어졌다. 도축장 유래의 난소에서 채란한 난자를 10% 거세한 수소혈청이 포함된 TCM-199배양에서 22시간동안 체외 성숙을

Artificial insemination (AI) with frozen or cooled semen is widely used in commercial fields of cattle and pig. Little is known about characteristics of canine sperm after freezing or cooling. For both practical and commercial goal, the canine semen treated with cooling and freezing should be carried out to exam the fundamentals, including sperm motility, survivability and fertilizing capacity. The aim of this study, thus, was to identify the effects of extended exposure to 4 on canine semen by motility, survivability, acrosomal changes following different duration. Fifteen ejaculates collected by digital manipulation twice per week from 3 dogs (Shih-Tzu) were divided to 16 aliquots after adding Tris-egg yolk (TE) buffer formulated by our laboratory, and cooled from 37 to 4, by ramp rate of 0.6/min. Each sample was evaluated by their motility, survivability and the acrosomal status at 0h (control), 2h, 12h and 1 d~10 d, respectively. The motility of spermatozoa was graded to 6 levels using the modified method of Seager. The survivability of sperm was assessed using an epifluorescence microscope after Fert/Light (Mole-cular Probes Inc.) staining. To estimate the proportion of the spermatozoa of intact acrosome, 200 spermatozoa were assessed in randomly selected fields, using epifluorescence microscope after FITC/PSA (Sigma) staining. At 2 h after cooling, the motility of most spermatozoa were assessed to be grade 0 and 1. At 12 h, high number of sperm were in grade 0 to 1, however, it was significantly (P<0.05) lower than that of 2 h. From 1 d to 4 d, ~50% of sperm was assessed to grade 0 to 1. On day 7, a little sperm were in grade 0 to 1. No sperm showed motility on day 10. Sperm motility was rapidly reduced by the percent of 10% of grade 0 to 1. From 2 h to 6 h, the number of live sperm was 90% and the sperm chilled for 10 days lived>50%. Acrosomal intact of spermatozoa exposed to 4 for 2 h was 51%, supposed the sperm of control was 100%. Our results suggest that 1) this is easy to transfer and preservation for short periods 2) AI can be used by semen chilled for 6-Day.