전자 및 화학 산업의 초순수 생산 및 원자력 발전소의 부식 제어를 위해 이온교환 수지탑의 성능 파악이 필수적이다. 따라서 본 연구에서는 4종의 H 및 ETAH 형 양이온 교환수지가 채워진 양이온 및 혼상 이온교환수지탑에 미량의 NaCl를 포함하는 에탄올아민(ETA) 및 암모니아(NH3) 용액을 주입하여 양이온 파과특성을 조사하였다. 조사 결과, 주성분인 ETAH+ 및 NH4 +와 달리, 미량성분인 Na+는 (이론적교환용량의 3배 이상) 시험기간 동안 수지탑 출구에서 파과 및 오버슈팅 현상이 나타나지 않았다. H형 수지탑의 파과현상은 ETAH+ 및 NH4 +가 순서대로 일어났고, 오버슈팅은 NH4 +가 파과할때 ETAH+에 대해서 발생했다. 파과영역의 너비로 결정되는 상대적 선택도는 NH4 +가 ETAH+보다 최대 51.5 % 더 높았다. 유입수 Na+ 농도가 높을수록, 선택도는 감소하고 오버슈팅 현상은 증가하였다. 이온교환 수지의 고유 특성을 개선하여 감소시킬 수 있는 Na+ 누출은, ETAH형에서 높았고 4종의 양이온수지에 대해 동일하지 않은 것으로 조사되었다.

Sediment cell is renewable energy which produces electric energy using immanent ingredients or reducing power of marine sediment as natural resources. Also the cell has an advantage that environmental pollution can be reduced through conversion of organic and inorganic contaminants into inert matter with generation of the energy. In this paper, we compared characteristics of electricity generation of the two different sediment cells, and investigated the regeneration effect of the sediment cells with manipulation of the sediment such as mixing and re-positioning. The results showed that 14.1 W/m2 of power was obtained with the aluminum electrode, and the mixing of the sediment could increase the power by 4 W/m2 compared to the control. Also, mixing the sediment has kept electricity for 4 weeks at a relatively constant level, which implied ‘fuel regeneration effect'. Meanwhile, the sediment cell was proved to be effective in reduction of COD, which was up to 28.6%.

Sediment works as a resource for electric cells. This paper was designed in order to verify how sediment cells work with anodic material such as metal and carbon fiber. As known quite well, sediment under sea, rivers or streams provides a furbished environment for generating electrons via some electron transfer mechanism within specific microbial population or corrosive oxidation on the metal surfaces in the presence of oxygen or water molecules. We experimented with one type of sediment cell using different anodic material so as to attain prolonged, maximum electric power. Iron, Zinc, aluminum, copper, zinc/copper, and graphite felt were tested for anodes. Also, combined type of anodes-metal embedded in the graphite fiber matrix-was experimented for better performances. The results show that the combined type of anodes exhibited sustainable electricity production for ca. 600 h with max. 0.57 W/㎡ Al/Graphite. Meanwhile, graphite-only electrodes produced max. 0.11 W/㎡ along with quite stationary electric output, and for a zinc electrode, in which the electricity generated was not stable with time, therefore resulting in relatively sharp drop in that after 100 h or so, the maximum power density was 0.64 W/㎡. It was observed that the corrosive reaction rates in the metal electrodes might be varied, so that strength and stability in the electric performances(voltage and current density) could be affected by them. In addition to that, COD(chemical oxygen demand) of the sediment of the cell system was reduced by 17.5∼36.7% in 600 h, which implied that the organic matter in the sediment would be partially converted into non-COD substances, that is, would suggest a way for decontamination of the aged, anaerobic sediment as well. The pH reduction for all electrodes could be a sign of organic acid production due to complicated chemical changes in the sediment.

The microbial adsorption characteristics of two different media for biological treatment were studied using attached diverse microbes onto activated carbon and ceramic. The results in the experiments of the characteristics of physical adhesion on two different media with addition of high and low concentrated substrate in the culture were observed that the efficient of adhesion onto F-400 activated carbon was higher over that of ceramic due to the surface area of media. The irradiation treatment by ultrasonication with 400 W power and 3 min retention time on the media without addition substrate conditions and subsequent mixing throughly the culture showed the highest efficiencv of cell detachment on the media. Three different microbes, P. ovalis, A. calcoaceticus, and B. subtillis were used for the study of the characteristics of microbial adhesion on the media. P. ovalis showed the highest adhesion capability while B. subtillis showed the lowest capability adhesion onto media either addition of substrate in the culture. The mixed bacterial culture showed 10% lower removal efficiency of DOC in the low concentrated substrate culture compared to the single pure culture. Whileas, it did not show significant difference between two cultures at high concentrated substrate. It was also observed same population density of microorganism by counting of microbes adhered to microbial media with an ultrasound treatment.