In this study, we addressed the prevention of fire extinguishing device malfunction caused by noise in the fire detector of automatic fire extinguishing devices applied to mobile equipment such as armored vehicles and tanks. The automatic fire extinguishing system consists of a fire detection unit, an automatic control unit, and a fire suppression unit. In the case of a fire detector, it is a major component of the fire detection unit. Even though no fire occurred during operation in the field, a number of fire extinguisher sprays occurred, and the malfunction of the fire detector, which is a fire detection unit, was reproduced. The cause was identified as noise in the fire detector connector due to vibration and shock that may occur during operation of the mobility equipment. In order to solve this problem, noise generated momentarily from a fire detector is treated as an exception, and when a fire signal is transmitted from the fire detector to the automatic control unit for more than a certain period of time, Software has been improved to enable fire extinguishers to operate. This study analyzed the causes of malfunctions in automatic fire extinguishing devices, which are components of mobile equipment, and derived improvement measures to improve the reliability of automatic fire extinguishing devices.

The condensation phenomenon can affect the product in terms of function and aesthetics, so it is a complaint of many users from the past, and continuous research has been conducted to solve it. A portable instrument panel is installed inside combat vehicles such as tanks and armored vehicles. Due to the nature of the combat vehicle operated in the special situation of battle, the internal heat generation of the instrument panel has increased significantly, which is presumed to be the cause of condensation inside the instrument panel. In this paper, a study on the development of subsequent processes was conducted to reduce the condensation phenomenon of the instrument panel for combat vehicles. In order to reduce the condensation phenomenon, the experiment was carried out by setting baking time and stabilization time as major factors. This paper is considered to be a reference research data for all systems in which similar assemblies are used as well as instrument panels for combat vehicles.

A universal joint is a device that transmits the power of a combat vehicle engine to a cooling fan. The power of the engine is transmitted to the universal joint as it is without buffering, and play occurs at the joint between the drive shaft connected to the engine and the driven shaft connected to the cooling fan according to the usage time. Accordingly, the universal joint is periodically replaced, and the criterion for this is the degree of torsion of the universal joint. However, if the universal joint is not properly maintained during the replacement cycle, damage to the universal joint as well as damage to the surrounding power supply may occur. Accordingly, a backlash measuring device was developed to determine the limit of durability of the universal joint, and the limit of durability was derived through regression analysis of the backlash value according to the use time obtained from the accelerated life test.