In this study, presents the mechanical bond strength properties of mortar using bio polymer in seaweed. The evaluation was based on the method presented in KS F 2762. It was confirmed that the resistance performance all levels of biopolymer using mortar excellent performance with bond strength over 1.0 MPa as defined in KS F 4042 『Polymer-cement mortar for Concrete Structures』.

This paper presents the mechanical properties of high performance fiber-reinforced concrete composites(HFCC) according to binder replacement rate. the compressive strength and single-axial tensile strength of HFCC were evaluated according to binder replacement rete. As a result of the test, the compression strength decreased as binder replacement rates increased, and B-20 mix properties expressed the most ideal tensile strain-stress curve.

In this study, the absorption protection agent was applied to the surface of fiber reinforced concrete to evaluate the chloride ion penetration resistance. The evaluation was based on the method presented in KS F 2711. It was confirmed that the resistance performance against chloride ion was improved by 56∼71% when the coating material was applied.

최근 제설제의 영향으로 콘크리트에는 복합열화가 작용되어 도로시설물에 대한 2차 피해와 유지 보수 비용이 급격히 증가되고 있다. 그래서 실란, 실록산 계열의 흡수방지제를 사용하여 콘크리트 내부로 침투되는 수분 및 염화이온을 차단하는데 이용하고 있는 실정이다. 본 연구에서는 실란, 폴리실록산 계열의 흡수방지제가 갖는 단점을 개선하고자 이를 구형으로 제 조하여 콘크리트 강도별 침투깊이 및 동결융해저항 성능을 분석하였다.

In this study, cement mortar (KS F4041) used for surface of floor was evaluated for durability of abrasion according to the mixing ratio of polymer. From the experimental results, it was confirmed that as the polymer content increases, the durability of abrasion properties increase.

In this study, dry shrinkage was evaluated by adding limestone powder according to the substitution ratio to Engineered Cementitious Composite. The test method was carried out by KS F 2424, and it was confirmed that the drying shrinkage tends to increase slightly as the substitution ratio of the limestone fine powder increases.

The purpose of this study was to evaluate flowability of engineered cemetitious composite(ECC) Using blast furnace slag and fly ash as a binder in mixture. From the test result, flowability value of all ECC mixtures show good flowability and self compacting performance.

From the test results, it was found that the compressive strength and the resistance of chloride ion penetration were evaluated the slag content of the concrete for bridge pavement. Compressive strength test results showed that initial strength was decreased as slag replacement ratio increased. The chlorine ion penetration performance increased with increasing strength.

In this study, cement mortar (KS F 4042) used for repairing concrete structures was evaluated for compressive strength and bond strength according to the mixing ratio of polymer. From the experimental results, it was confirmed that as the polymer content increases, the bond strength properties increase, but the compressive strength decreases slightly at a certain rate.

In this current study evaluated the horizontal shear strength of reinforced concrete pile between pile body and infilled concrete interface. From the calculated results of horizontal shear strength it was found that the interface between pile body and infilled concrete was evaluated to be able to safely resist factored shear stress.

In This study, the bio-inspired high energy absorption cementitious composites was developed which is a new structural material performing a high energy absorption and ductility property imitated from shells. The flexural performance of the cementitious composites was evaluated and as a result, excellent ductility was obtained.

The purpose of this study was to evaluate flowability of engineered cemetitious composite(ECC) Using blast furnace slag and fly ash as a binder in mixture. From the test result, flowability value of all ECC mixtures show good flowability and self compacting performance.

From the test results, it was found that the compressive strength and the resistance of chloride ion penetration were evaluated the slag content of the concrete for bridge pavement. Compressive strength test results showed that initial strength was decreased as slag replacement ratio increased. The chlorine ion penetration performance increased with increasing strength.

In this study, cement mortar (KS F 4042) used for repairing concrete structures was evaluated for compressive strength and bond strength according to the mixing ratio of polymer. From the experimental results, it was confirmed that as the polymer content increases, the bond strength properties increase, but the compressive strength decreases slightly at a certain rate.

This study was performed to evaluate compressive strength of Engineered Cementitious Composite(ECC) using limestone powder. In order to evaluate compressive strength, specimens were manufactured based on KS F 2403 Standard. From the test result, compressive strength of specimens using 10% and 20% limestone powder was lower than plain specimens.

The Chloride ion penetration resistance of Engineered cementitious composite using surface coating material was evaluated in this study. The test results showed that the amount of chloride ion of surface coated specimens were decreased approximately 22 % lower than that of plain specimens

The purpose of this current study was to evaluate direct tensile properties of engineered cemetitious composite(ECC)1) according to the volume fraction of the non-sintered binder. From the test result, the higher volume fraction of the non-sintered binder, the tensile strength was decreased but the maximum strain was increased.

In this study, freezing and thawing test of secondary product was performed using the Fiber Reinforced polymer Cement composites. From the test result, it was found that fiber reinforced polymer cement composites resistance of freezing and thawing were better than that of conventional products.

This study was performed to analyze the flexural performance of large diameter PHC Pile reinforced with transveres and longitudinal rebar and in-filled concrete. From the flexural test result, it was found that the initial cracking strength and maximum flexural strength of composite PHC pile were approximately 400% and 345% higher than that of the conventional PHC pile.

The purpose of this study is inspection of concrete using impact resonance method and UPV(Ultrasonic Pulse Velocity) method. The frequency polygon of non-destructive testing result shows that non-destructive testing is closely related to compressive strength of concrete.