본 연구는 공기주입 이중피복온실과 관행 이중피복온실의 생육환경과 단열성능을 비교하기 위하여 수 행하였다. 두 온실의 온도, 상대습도, 포차, 이산화탄소농도, 일사량, 딸기 생산량 및 난방연료소비량을 비교하 였다. 공기주입온실이 관행온실보다 야간에 상대습도가 더 높고 포차는 더 낮게 나타나 딸기의 생육에 좋지 않은 환경을 보여주었다. 이산화탄소농도는 공기주입온실이 관행온실보다 더 높게 나타났으며, 이는 공기주입 온실이 더 밀폐되어 있어 환기량이 적기 때문인 것으로 판단된다. 관행온실의 광투과율이 77%로 공기주입온실 의 72%보다 더 높아 관행온실의 광환경이 더 우수한 것으로 나타났다. 관행온실의 딸기 생산량이 더 높게 나 타났으며, 이는 관행온실의 생육환경이 공기주입온실보다 더 우수한 결과로 판단된다. 난방연료는 공기주입온 실에서 더 적게 소모되어 공기주입온실의 단열성능이 더 우수한 것으로 나타났다.

Two sintering methods of a pressureless sintering and a spark-plasma sintering are tested to densify the Fe-TiC composite powders which are fabricated by high-energy ball-milling. A powder mixture of Fe and TiC is prepared in a planetary ball mill at a rotation speed of 500 rpm for 1h. Pressureless sintering is performed at 1100, 1200 and 1300oC for 1-3 hours in a tube furnace under flowing argon gas atmosphere. Spark-plasma sintering is carried out under the following condition: sintering temperature of 1050oC, soaking time of 10 min, sintering pressure of 50 MPa, heating rate of 50oC, and in a vacuum of 0.1 Pa. The curves of shrinkage and its derivative (shrinkage rate) are obtained from the data stored automatically during sintering process. The densification behaviors are investigated from the observation of fracture surface and cross-section of the sintered compacts. The pressureless-sintered powder compacts show incomplete densification with a relative denstiy of 86.1% after sintering at 1300oC for 3h. Spark-plasma sintering at 1050oC for 10 min exhibits nearly complete densification of 98.6% relative density under the sintering pressure of 50 MPa.

Fe-TiC composite powders are fabricated by planetary ball mill processing. Two kinds of powder mixtures are prepared from the starting materials of (a) (Fe, TiC) powders and (b) (Fe, TiH2, Carbon) powders. Milling speed (300, 500 and 700 rpm) and time (1, 2, and 3 h) are varied. For (Fe, TiH2, Carbon) powders, an in situ reaction synthesis of TiC after the planetary ball mill processing is added to obtain a homogeneous distribution of ultrafine TiC particulates in Fe matrix. Powder characteristics such as particle size, size distribution, shape, and mixing homogeneity are investigated. In case of (Fe, TiC) powder many coarse TiC particulates with size of several μm are unevenly distributed in Fe-matrix. The composite powder prepared from (Fe, TiH2, C) powder mixture showed a homogeneous dispersion of ulatrafine TiC particulates.

Fe-TiC composite was fabricated from Fe and TiC powders by high-energy milling and subsequent spark- plasma sintering. The microstructure, particle size and phase of Fe-TiC composite powders were investigated by field emission scanning electron microscopy and X-ray diffraction to evaluate the effect of milling conditions on the size and distribution of TiC particles in Fe matrix. TiC particle size decreased with milling time. The average TiC particle size of 38 nm was obtained after 60 minutes of milling at 1000 rpm. Prepared Fe-TiC powder mixture was densified by spark- plasma sintering. Sintered Fe-TiC compacts showed a relative density of 91.7~96.2%. The average TiC particle size of 150 nm was observed from the FE-SEM image. The microstructure, densification behavior, Vickers hardness, and frac- ture toughness of Fe-TiC sintered compact were investigated.

Withthe increasing trend of global trades and protection of agro-ecosystem in importing and exporting countries against quarantine pest, quarantine and pre-shipment(QPS) fumigation in perishable commodities is now more important to maintain postharvest quality until delivering to end user not just eradiation of quarantine pest. However, there are limited use of MB fumigation on export fruits and vegetables due to phytotoxic damages of fumigated one. VapormateTM, alternative to methyl bromide(MB), a gas formulation of ethyl formate(EF) with carbon dioxide, is commercially in use for imported fruits fumigation such as bananas and lemon. Herein, based on previous preliminary studies, scale-up and commercial scale fumigation of ethyl formate is presented for promising export paprika and tomato. Efficacy of ethyl formate was described in terms of concentration × time (CT) products to Myzus persicae for paprika and Bemisia tabaci for tomato.

Since Montreal protocol in1989 designated MB(methyl bromide) as ozone depleting chemicals, IPPC(International Plant Protection Convention) has adopted replacing the MB with alternative chemical and reducing the rate of MB use in plant quarantine in 2008. Pineapples are one of the most frequently fumigated imported fruit with MB in Korea. However, there was no technically available replacement. Therefore, we evaluated phosphine(PH3) fumigation as alternative to MB in applying pineapples. In the preliminary test, PH3 gas in 12L desicators to calculate ranged to 0.1 from 2g/m3 was tested at 2 and 24hr exposure to target pest, citrus mealy bug(CMB, Planococcus citri). All different of stage of CMB was shown 100% mortality when 2g/m3 of PH3 applied for 24hrs at 8℃. To confirm studies designed in 0.5m3 fumigation chamber, all egg, nymph and adult stages of CMB was killed completely and there wasn’t any phytotoxic and quality damages on pineapples for 2 weeks post-fumigation periods at 8℃. In terms of commercial use, further commercial research will need to be carry out in cooperation with importers and fumigators.

TiB2-reinforced iron matrix composite (Fe-TiB2) powder was in-situ fabricated from titanium hydride (TiH2) and iron boride (FeB) powders by the mechanical activation and a subsequent reaction. Phase formation of the composite powder was identified by X-ray diffraction (XRD). The morphology and phase composition were observed and measured by field emission-scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. The results showed that TiB2 particles formed in nanoscale were uniformly distributed in Fe matrix. Fe2B phase existed due to an incomplete reaction of Ti and FeB. Effect of milling process and synthesis temperature on the formation of composite were discussed.