본 연구는 에너지 저장 응용을 위한 PVI-PGMA/LiTFSI 고분자 막 전해질 및 CxNy-C 유연 전극의 합성 및 특성 에 관한 연구이다. 이중 기능을 갖는 PVI-PGMA 공중합체는 우수한 이온 전도성을 나타내었으며, PVI-GMA73/LiTFSI200 막 전해질은 1.0 × 10-3 S cm-1의 최고 전도도를 달성하였다. CxNy-C 전극의 전기화학적 성능을 체계적으로 분석하였으며, C3N2-C는 나노와이어와 다면체로 구성된 높은 연결성을 갖는 하이브리드 구조와 이중 Co/Ni 산화물을 포함하여 풍부한 산 화환원 활성 부위와 이온 확산을 용이하게 하는 특징으로 인해 958 F g-1의 최고용량 및 최소한의 전하 전달 저항(Rct)을 달성 하였다. 흑연 탄소 껍질의 존재는 충전-방전 동안 높은 전기화학적 안정성에 기여하였다. 이러한 결과들은 고성능 에너지 저 장 장치인 슈퍼커패시터 및 리튬 이온 전지와 같은 첨단 에너지 저장 장비에 PVI-PGMA/LiTFSI 고분자 막 전해질과 CxNy-C 전극을 활용하는 잠재력을 보여주었으며, 지속 가능하고 고성능의 에너지 저장 기술을 더욱 발전시키는 길을 열어가 고 있다.

Cryopreservation of avian semen is a useful tool to preserve genetic resource for aim of preventing extinction induced by infectious disease like avian influenza. Unlike those of mammals, data from chicken cryopreserved semen has not been showed feasible results. So, various cryoprotectants and diluents have been examined in many methods. In this report, as a major ingredient of avian seminal plasm, glutamine was substituted by alanyl glutamine to enhance physiological stability of chicken semen during freezing. We studied effect of glycerol and Dimethylacetamide(DMA) on motility and progressive motility of spermatozoa using glutamine diluent(EK-G) or alanyl glutamine diluent(EK-A) condition. The semen of Ogye was collected twice a week by the dorso-abdominimal massage method and diluted with same volume of EK-G or EK-A at 25℃ and stored for 10 min at 4℃ in cold chamber. Glycerol or DMA was added to diluted semen to reached 7% of final concentration at 4℃. After 3min of equilibration, the diluted semen was packed into 0.25ml straws and subjected to cryopreservation used freezing equipment. The packed straw were placed on height 5 cm above surface of liquid nitrogen(LN2) and held for 10min. After preserved for 2 weeks, the straw was thawed onto the 4℃ cooling bath. The images of motility and progressive motility spermatozoa were recorded by digital image recorder and analyzed by manual. The results showed 68.5% motility and 34.1% progressive motility in DMA/EKA diluent, 31.45% and 17.6% in glycerol/EKA, 45.4% and 8.6% in DMA/EKG, and 9.7% and 6.4% in glycerol/EKG. With these results, the alanyl glutamine and DMA could be used as a main composition of diluent and cryoprotectant for cryopreservation of chicken semen.

Sexual dimorphism is the most conspicuous difference between the sexes. This study examines possible sexual dimorphism and the relative growth patterns of morphometric characteristics in the marine medaka, Oryzias dancena for their potential to help differentiate between males and females of this species. The von Bertalanffy growth parameters estimated by a non-linear regression method were L∞=30.2 mm, K=3.22/year, and τ0=-0.05. All 18 characteristics measured showed a difference between males and females from 70 days after hatching. Each of these characteristics were significantly different between sexes (ANCOVA, P<0.05), and the ratio of standard length between sexes showed that males were larger than females for all five morphometric measurements. Fin length measurements were taken for 21 distances of anal fin and 7 distances of dorsal fin between landmarks. There were all differences for all dorsal fin rays between the males and the females and there is significant difference in 70 days after their hatch when the sexual dimorphism is presented. The significant difference (P<0.05) in fin ray for male and female was more greatly seen as they grow. Male marine medaka showed more rapid growth than females, with longer length, dorsal fins and anal fins. Differences in these characteristics will be useful during experiments when it is necessary to differentiate between sexes of marine medaka.

This study describes results on sexual maturation and characteristics of natural spawned eggs to develop a method for the production of stable, healthy fertilized eggs from captive-reared yellowtail kingfish, Seriola lalandi. A total of 59 yellowtail kingfish were captured off the coast of Jeju Island, after which the broodstock was cultured in indoor culture tank (100 m3) until they were 6.1–14.9 kg in body weight. As part of the rearing management for induced sex maturation, the intensity of illumination was maintained at 130 lux. The photoperiod (light/dark; L/D) was set to a 12 L/12 D from October 2013 to January 2014, and 15 L/9 D from February 2014 to June 2014. Feeds comprised mainly EP (Extruded Pellets), with squid cuttlefish added for improvement of egg quality, and was given from April to June 2014. The first spawning of yellowtail kingfish occurred in May 3, 2014, at a water temperature of 17.0°C. Spawning continued until June 12, 2014, with the water temperature set at 20.5°C. Time of spawning was 26 times at this period. The total number of eggs that spawned during the spawning period was 4,449×103. The buoyant rate of spawning eggs and fertilization rate of buoyant eggs during the spawned period were 76.1% and 100%, respectively. The diameters of the egg and oil globule were 1.388 ± 0.041 mm and 0.378 ± 0.029 mm, respectively, which was higher in early eggs than in those from late during the spawned period.

This study monitored the morphological development of embryo, larvae and juvenile yellowtail kingfish, Seriola lalandi, for their aquaculture. The fertilized eggs obtained by natural spawning were spherical shape and buoyant. Fertilized eggs were transparent and had one oil globule in the yolk, with an egg diameter of 1.35 ± 0.04 mm and an oil globule diameter of 0.32 ± 0.02 mm. The fertilized eggs hatched 67–75 h after fertilization in water at 20 ± 0.5°C. The total length (TL) of the hatched larvae was 3.62 ± 0.16 mm. During hatching, the larvae, with their mouth and anus not yet opened. The yolk was completely absorbed 3 days after hatching (DAH), while the TL of post-larvae was 4.72 ± 0.07 mm. At 40 DAH, the juveniles had grown to 30.44 ± 4.07 mm in TL, body depth increased, the body color changed to a black, yellow, and light gray-blue color, and 3–4 vertical stripes appeared. At 45 DAH, the juveniles were 38.67 ± 5.65 mm in TL and 10.10 ± 0.94 mm in body depth. The fish were green with a light orange color, with 7 faint green-brown stripes on the sides of their body. At 87 DAH, the juveniles had grown to 236.11 mm in TL, 217.68 mm in fork length, and 136.5 g in weight. The fish resembled their adult form, with a light yellow-green body color, loss of the pattern on the sides of their body, and a yellow coloration at the tip of the caudal fin.

The landmark-based morphometric and meristic analysis of the kelp grouper (Epinephelus bruneus), red spotted grouper (E. akaara) and seven-banded grouper (E. septemfasciatus) were performed to compare the differentiation of overall body shape and structure. The measurements of the morphometric dimensions were observed in 25 parts (truss dimension: 16 parts; head part dimension: 9 parts) of 38 morphometric dimensions and also meristic differences observed in 3 parts (dorsal fin, anal fin and caudal fin) of 6 meristic counts (P < 0.05). Observed morphometric characteristics primarily involved in truss and head part dimension, kelp grouper have larger values in caudal part of truss dimension, kelp grouper, red spotted grouper and seven-banded grouper have similar values in pectoral part of truss dimension, in addition to, results of head part dimension showed that red spotted grouper have smaller values in overall dimensions (P < 0.05). As meristic characteristics, kelp grouper have more number of anal fin rays than other fish, red spotted grouper have more number of dorsal soft rays than other fish, and seven spotted grouper have more number of anal soft rays, and caudal fin rays than other fish (P < 0.05). Photographed under the x-ray, kelp grouper have the most curved vertebral column and largest swim bladder than other fishes (P < 0.05). Our results of this study confirmed that 3 subfamily fishes adequately can distinguish with external body shape, and we hope that the results of our study could be used to identify in Serranidae family as taxonomical parameters.

In this paper, a robotic system which consists of a precision manipulator and a micro gripper for a micro system assembly is presented. By the experiment, we proved that the developed the system gives acceptable performance when minute operations. Developed the micro-nano robot is actuated by newly proposed modular revolute and prismatic actuators. As an end-effector of this system, micro gripper is designed and fabricated with MEMS technology and the displacement of jaw is up to 142.8 micro meter. We think that new robot system will be appropriate for micro system assembly tasks and life science application