Naval weapons systems of the Republic of Korea are acquired through the Defense Planning Management System. Recently, acquisition of some naval ships have been delayed, and the causes of the delays have been recognized as inappropriate project management at the Execution Phase. However, we argue that the delay problem in naval ships acquisition should be approached, with due regard for the entire Defense Planning Management System. That is, We should try to investigate from Planning Phase to those of Programming, Budgeting and Execution Phases. Therefore, in this study, we investigated the actual cases of the delay in naval acquisition at all phases of the Defense Planning Management System. Based on the investigation, we tried to identify the naval ship Acquisition Delay Factors and find out the Weights of those factors. As the next step, we calculated the Influence Measures on the naval missions, including the Cost of Naval Capability Gap derived from the delays in acquisition of naval ships. As a final step, we calculated the Acquisition Delay Measures based on the interrelationship between the Acquisition Delay Factors and the Influence Measures. Then we evaluated and analyzed what the results stand for. Finally, we made suggestions for future improvement. The improvement suggestions we made for preventing delay in acquisition of naval ships in this study are as follows. First, we need a shift in perception. It is necessary to measure the Acquisition Delay Factors in acquiring naval ships and manage them from the Planning Phase. Second, resolution must be concerted efforts. All relevant agencies, not just a few, should work together to resolve the problems of acquisition delay. Third, analysis must be based on the accumulation of data. This allows the elaborating of naval ship Acquisition Delay Factors and Delay Measures. If this research method is applied to other military weapons systems in the future, we may be able to not just identify the Acquisition Delay Factors in acquisition of other military weapons systems, but also pursue improvement in those cases.

In a series of recent launch tests, North Korea has been improving the firepower of its missiles that can target South Korea. North Korea’s missiles and submarines are capable of threatening targets in South Korea and are likely faster and more covert than the systems previously seen in North Korea. The advanced threats require that ROK Navy should not only detect them earlier than ever but also response quicker than ever. In addition to increasing threats, the number of young man that can be enlisted for military service has been dramatically decreasing. To deal with these difficulty, ROK navy has been making various efforts to acquire a SMART warship having enhanced defense capability with fewer human resources. For quick response time with fewer operators, ROK Navy should improve the efficiency of systems and control tower mounted on the ship by promoting the Ship System Integration. Total Ship Computing Environment (TSCE) is a method of providing single computing environment for all ship systems. Though several years have passed since the first proposal of TSCE, limited information has been provided and domestic research on the TSCE is still in its infancy. In this paper, we apply TSCE with open architecture (OA) to solve the problems that ROK Navy is facing in order to meet the requirements for the SMART ship. We first review the level of Ship System Integration of both domestic and foreign ships. Then, based on analyses of integration demands for SMART warship, we apply real time OA to design architecture for TSCE from functional view and physical view. Simulation result shows that the proposed architecture has faster response time than the response time of the existing architecture and satisfies its design requirements.

The Cooperative Engagement Capability (CEC) System produces a synergy between the sensors and shooters that are used on various platforms by integrating them. Even the US Navy has been recently adopting the CEC system that maximizes the effectiveness of the air defense operations by efficiently coordinating the dispersed air defense assets. The Navy of other countries are conducting research studies on the theory and application methods for the CEC system. The ROK Navy has limited air defense capabilities due to its independent weapons systems on battle ships. Therefore, the ROK Navy is currently going through a phase where research on proving the validity of building the CEC system because it will provide a way to overcome the limit of the platform based air defense capability. In this study, our goal is to propose methods that maximize the air defense capability of ROK Navy, identify the available assets for constructing the CEC system, and estimate effects of the CEC system when it is applied to the naval operations. In addition, we will provide a simple model that was developed to estimate these effects and a case study with virtual data to demonstrate the effects of the system when it is applied to the naval operations. The research result of this study will provide a way for building the basis of the Korean CEC system.

The private sector is currently reviewing the feasibility of the project or deciding economic policies by analyzing the economic ripple effects. However, the arms acquisition project focuses on the need for the national defense weapons system by analyzing the costs and the effectiveness of the analysis and reviewing the necessity and feasibility of the project. In order to analyze the economic ripple effects, KB (the Bank of Korea) prepares and publishes an analysis table of industrial associations in a given unit. IAAR (the industrial association analysis report) is difficult to apply directly to the defense weapons system. Therefore, research on the economic ripple effects applicable to the defense arms procurement project was needed. In this study, we propose the generic methodology for estimating economical and technical ripple effects resulted in acquiring new weapon systems. Based on the analysis of inter-industrial relations, economical ripple effects are estimated with production inducing effects, value-induced effects, employment-induced effects and export-induced effects. Also, the technological ripple effects are estimated with technological intensity represented by investment cost in research and development. To show the validity of proposed methodology, a case study of acquiring new weapon systems such as GR (guided rocket), destroyer, and helicopter is accomplished. From the case study, it is concluded that these economical & technological ripple effects can be used as a reference to decision making in the course of acquiring major future defense weapons systems.

Quantum-inspired Genetic Algorithm (QGA) is a probabilistic search optimization method combined quantum computation and genetic algorithm. In QGA, the chromosomes are encoded by qubits and are updated by quantum rotation gates, which can achieve a genetic search. Asset-based weapon target assignment (WTA) problem can be described as an optimization problem in which the defenders assign the weapons to hostile targets in order to maximize the value of a group of surviving assets threatened by the targets. It has already been proven that the WTA problem is NP-complete. In this study, we propose a QGA and a hybrid-QGA to solve an asset-based WTA problem. In the proposed QGA, a set of probabilistic superposition of qubits are coded and collapsed into a target number. Q-gate updating strategy is also used for search guidance. The hybrid-QGA is generated by incorporating both the random search capability of QGA and the evolution capability of genetic algorithm (GA). To observe the performance of each algorithm, we construct three synthetic WTA problems and check how each algorithm works on them. Simulation results show that all of the algorithm have good quality of solutions. Since the difference among mean resulting value is within 2%, we run the nonparametric pairwise Wilcoxon rank sum test for testing the equality of the means among the results. The Wilcoxon test reveals that GA has better quality than the others. In contrast, the simulation results indicate that hybrid-QGA and QGA is much faster than GA for the production of the same number of generations.

Naval combat system developed in-country is progressing at an alarming rate since 2000. ROK navy will be achieved all vessels that have combat system in the near future. The importance of System Engineering and Integrated Logistics Support based on reliability analysis is increasing. However, reliability analysis that everyone trusted and recognized is not enough and applied practically for development of Defense Acquisition Program. In particular, Existing Reliability Analysis is focusing on reliability index (Mean Time Between Failure (MTBF) etc.) for policy decision of defense improvement project. Most of the weapon system acquisition process applying in the exponential distribution simply persist unreality due to memoryless property. Critical failures are more important than simple faults to ship’s operator. There are no confirmed cases of reliability analysis involved with critical failure that naval ship scheduler and operator concerned sensitively.Therefore, this study is focusing on Mean Time To Critical Failure (MTTCF), reliability on specific time and Operational Readiness Float (ORF) requirements related to critical failure of Patrol Killer Guided missile (PKG) combat system that is beginning of naval combat system developed in-country. Methods of analysis is applied parametric and non-parametric statistical techniques. It is compared to the estimates and proposed applications. The result of study shows that parametric and non-parametric estimators should be applied differently depending on purpose of utilization based on test of normality. For the first time, this study is offering Reliability of ROK Naval combat system to stakeholders involved with defense improvement project. Decision makers of defense improvement project have to active support and effort in this area for improvement of System Engineering.

In order to achieve success in ground operations, searching for moving targets is one of critical factors. Usually, the system of searching for adversary ground moving targets has complex properties which includes target’s moving characteristics, camouflage level, terrain, weather, available search time window, distance between target and searcher, moving speed, target’s tactics, etc. The purpose of this paper is to present a practical quantitative method for effectively searching for infiltrated moving targets considering aforementioned complex properties. Based upon search theories, this paper consists of two parts. One is infiltration route analysis, through terrain and mobility analysis. The other is building dynamic probability maps through Monte Carlo simulation to determine the prioritized searching area for moving targets. This study primarily considers ground moving targets’ moving pattern. These move by foot and because terrain has a great effect on the target’s movement, they generally travel along a constrained path. With the ideas based on the terrain’s effect, this study deliberately performed terrain and mobility analysis and built a constrained path. In addition, dynamic probability maps taking terrain condition and a target’s moving speed into consideration is proposed. This analysis is considerably distinct from other existing studies using supposed transition probability for searching moving targets. A case study is performed to validate the effectiveness and usefulness of our methodology. Also, this study suggests that the proposed approach can be used for searching for infiltrated ground moving target within critical time window. The proposed method could be used not only to assist a searcher’s mission planning, but also to support the tactical commander’s timely decision making ability and ensure the operations’ success.

A missile defense system is composed of radars detecting incoming missiles aiming at defense assets, command control units making the decisions on weapon target assignment, and artillery batteries firing of defensive weapons to the incoming missiles. Although, the technology behind the development of radars and weapons is very important, effective assignment of the weapons against missile threats is much more crucial. When incoming missile targets toward valuable assets in the defense area are detected, the asset-based weapon target assignment model addresses the issue of weapon assignment to these missiles so as to maximize the total value of surviving assets threatened by them. In this paper, we present a model for an asset-based weapon assignment problem with shoot-look-shoot engagement policy and fixed set-up time between each anti-missile launch from each defense unit. Then, we show detailed linear approximation process for nonlinear portions of the model and propose final linear approximation model. After that, the proposed model is applied to several ballistic missile defense scenarios. In each defense scenario, the number of incoming missiles, the speed and the position of each missile, the number of defense artillery battery, the number of anti-missile in each artillery battery, single shot kill probability of each weapon to each target, value of assets, the air defense coverage are given. After running lpSolveAPI package of R language with the given data in each scenario in a personal computer, we summarize its weapon target assignment results specified with launch order time for each artillery battery. We also show computer processing time to get the result for each scenario.

An effective method for produce munitions effectiveness data is to calculate weapon effectiveness indices in the US military’s Joint Munitions Effectiveness Manuals (JMEM) and take advantage of the damage evaluation model (GFSM) and weapon Effectiveness Evaluation Model (Matrix Evaluator). However, a study about the Range Safety that can be applied in the live firing exercises is very insufficient in the case of ROK military. The Range Safety program is an element of the US Army Safety Program, and is the program responsible for developing policies and guidance to ensure the safe operation of live-fire ranges. The methodology of Weapon Danger Zone (WDZ) program is based on a combination of weapon modeling/simulation data and actual impact data. Also, each WDZ incorporates a probability distribution function which provides the information necessary to perform a quantitative risk assessment to evaluate the relative risk of an identified profile. A study of method to establish for K-Range Safety data is to develop manuals (pamphlet) will be a standard to ensure the effective and safe fire training at the ROK military education and training and environmental conditions. For example, WDZs are generated with the WDZ tool as part of the RMTK (Range Managers Tool Kit) package. The WDZ tool is a Geographic Information System-based application that is available to operational planners and range safety manager of Army and Marine Corps in both desktop and web-based versions. K-Range Safety Program based on US data is reflected in the Korean terrain by operating environments and training doctrine etc, and the range safety data are made. Thus, verification process on modified variables data is required. K-Range Safety rather than being produced by a single program, is an package safety activities and measures through weapon danger zone tool, SRP (The Sustainable Range Program), manuals, doctrine, terrain, climate, military defence M&S, weapon system development/operational test evaluation and analysis to continuously improving range safety zone. Distribution of this K-range safety pamphlet is available to Army users in electronic media only and is intended for the standing army and army reserve. Also publication and distribution to authorized users for marine corps commands are indicated in the table of allowances for publications. Therefore, this study proposes an efficient K-Range Safety Manual producing to calculate the danger zones that can be applied to the ROK military’s live fire training by introducing of US Army weapons danger zone program and Range Safety Manual

This study attempts to utilize the economic efficiency analysis results focused on the break-even point as an indicator for the decision making of commanders and staff. We suggested a method of determining economic life by utilizing logistics information system and commercial program Minitab with a focus on the equipment’s operational environment and performance data, whereas previously the equipment’s retirement period was simply determined by the current equipment prices and sustainable period.