간행물
한국산업경영시스템학회지 KCI 등재 Journal of Society of Korea Industrial and Systems Engineering
- 발행기관 한국산업경영시스템학회
- 자료유형 학술지
- 간기 계간
- ISSN 2005-0461 (Print)2287-7975 (Online)
- 수록기간 1978 ~ 2024
- 주제분류 공학 > 산업공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
Vol. 39 No. 4 (2016년 12월) 16건
1.
2016.12
구독 인증기관 무료, 개인회원 유료
As manufacturing industries become globalized, product design affects every area of organization. The design sets the goals for a number of different departments, so if it fails to effectively communicate these goals, the entire organization is less efficient. In addition, To communicate clearly, the design must represent a product that meets its technical specification.GD&T (Geometric Dimensioning and Tolerancing) is one of the most important factors, which has an effect on efficiency of manufacture system, in designing products. However, most of designers in different industries are prone to ignore the importance of GD&T.To analyse the importance of GD&T compliance with international standards for design drawing, a comparison analysis of the difference between two methods, composite profile control and multiple single segment profile control, is performed on three different cases and suggests how it used to be more suitable.Composite profile tolerance is specified by a dual feature control frame that has one profile symbol specified with two lines of tolerance information. Whereas a multiple single segment profile control is when two or more single segment profile callouts are used to define the location and/or orientation and/or size and/or form of a part feature. In this study, the following results will be provided : a clear definition and an obvious difference of the tolerance zone, datums and datums sequence and minimization of tolerances.On this study, composite profile tolerance and multiple single segment profile tolerance were discussed. Next steps of research will consist on reaching more accurate results for profile control. Further research will be focused on dealing with the remaining 14 symbols of GD&T.
4,000원
2.
2016.12
구독 인증기관 무료, 개인회원 유료
Unlike most researches that focus on single manufacturer or single buyer, this research studies the cooperation policy for two participants of supply chain such as single vendor and single buyer. Especially, this paper deals with single vendor-single buyer integrated-production inventory problem. If the buyer orders products, then the vendor will start to make products and then the products will be shipped from the vendor to the buyer many times. The buyer is supposed to order again when the buyer’s inventory level hits reorder point during the last shipment and this cycle keeps repeated. The buyer uses continuous review inventory policy and customer’s demand is assumed to be probabilistic. The contribution of this paper is to present a mixed approach and derive its cost function. The existing policy assumes that the size of shipping batch from single vendor to single buyer is increasing, called Type 1, or constant, called Type 2. In mixed approach, the size of shipping batch is increasing at the beginning part of the cycle, and then its size is constant at the ending part of the cycle. The number of shipping for Type 1 and Type 2 in a cycle in mixed approach is determined to minimize total cost. The relationship between parameters, for example, the holding cost per product, the set up cost per order, and the shortage cost per item and decision variables such as order quantity, safety factor, the number of shipments, and shipment increasing factor is figured out via sensitivity analysis. Finally, it is statistically proved that the mixed approach is superior to the existing approaches.
4,000원
3.
2016.12
구독 인증기관 무료, 개인회원 유료
SCM activities in a company are considered as total innovation through synchronizing supply and demand while maintaining appropriate inventory level and reducing the business operating costs. Until now, even several researches are carried out on the SCM performance of the companies which have introduced and been operating SCM, the research on the cost analysis for the inventory which occurs frequently on supply chain is still insufficient. Especially, for the electronics industry in which the product depreciation is sharp caused by the short product life cycle and the complexity of distribution channels, even the inventory related costs are a major factor in business management, since the current estimated criteria of inventory costs are limited to the interest and maintenance management costs, the criteria do not reflect the total influence of the product depreciation and lost opportunity cost which are related to the business management. Furthermore, even though the rapid price drops of the distributor inventory caused by the frequent new model launch can be covered by the product manufacturers, the scale of total costs related to the inventory has not been conceived because the price compensation is traditionally considered as a market costs.In this research, we analyzed the inventory characteristics of electronics industry in which the price depreciation happens frequently, newly defining the estimated criteria of the product total inventory cost which includes price depreciation from the product manufacturers’ view. Finally we focus on the case study of a representative electronics company and verify the scale of the influence on management performance.
4,200원
4.
2016.12
구독 인증기관 무료, 개인회원 유료
Korea’s main manufacturing industries, which have led its economy for the past three decades, are faced with a serious downturn and loss of competitive advantages due to the current economic depression, China’s rise, and the drop of oil prices. Korean business firms must adopt the paradigm shift in their value strategies, along with a government-led industrial restructuring in order to gain sustainable competitive advantages. Business firms allocate their limited resources between value creation and value appropriation, however, what effect does strategic emphasis on value creation versus value appropriation have on a business firm's financial performance? This paper empirically addresses this issue by examining the effect of shifts in strategic emphasis on stock return. Furthermore, this study examines appropriate choices of strategic emphasis to gain differential financial performance. The data set used in this regression analysis comes from the KISLINE database of NICE Information Service. The variables that form the basis of this analysis are stock return, ROA, and Strategic Emphasis [(advertising expenditures-R&D expenditures)/assets]. The interactive effect with situational factors regarding the firm and the type of technological environment in which the firm is operating was also analyzed. Our results show that investors acknowledge a shift of strategic emphasis as a sign of stock valuation. In comparison to US, Korean business firms have weak value creation capabilities in high-technology industries, and weak value appropriation capabilities in low-technology industries. This proves Korean firms are fast followers in the global market. Our findings suggest that Korean firms have to adopt a balanced value strategy, nurturing value creation and developing value appropriation for overcoming the current economic downturn and becoming a first mover in the dawn of “Industry 4.0.”
4,600원
5.
2016.12
구독 인증기관 무료, 개인회원 유료
The engineering knowledge and technology is core driving forces of continuous growth in knowledge based society. Companies, the government, and universities are the subjects of an innovation and the cooperation between them is very important. Nowadays, the main purpose of industry-university cooperation moves to train experts and develop a new product. A shift of the paradigm came from the change of recognition that the final consumers of the program are companies and the universities are supporters of the program. In this paper, we investigate the purpose, participation and satisfaction of companies to industry-academy technology cooperation through empirical studies. The need to expert training, product development and process development makes companies participate industry-academy technology cooperation and companies have different purpose of participation by the business type. Companies often feel that expert training, subsidiary purpose of industry-academy technology cooperation, is more important than product development or process development. This result is caused by the real world environment of small and mid-size companies, lacking of technology experts. The participation of companies to each technology cooperation program (technology transfer, joint technology development, consigned technology development, technology consulting, co-op. lab.) is also different by business type. The companies’ satisfaction with the purpose of process development is relatively higher than that with the purpose of product development and companies show also different satisfaction value by business type and participating program. The results of this study can give a contribution to the design of demand oriented industry-academy technology cooperation model.
4,000원
6.
2016.12
구독 인증기관 무료, 개인회원 유료
Naval combat system developed in-country is progressing at an alarming rate since 2000. ROK navy will be achieved all vessels that have combat system in the near future. The importance of System Engineering and Integrated Logistics Support based on reliability analysis is increasing. However, reliability analysis that everyone trusted and recognized is not enough and applied practically for development of Defense Acquisition Program. In particular, Existing Reliability Analysis is focusing on reliability index (Mean Time Between Failure (MTBF) etc.) for policy decision of defense improvement project. Most of the weapon system acquisition process applying in the exponential distribution simply persist unreality due to memoryless property. Critical failures are more important than simple faults to ship’s operator. There are no confirmed cases of reliability analysis involved with critical failure that naval ship scheduler and operator concerned sensitively.Therefore, this study is focusing on Mean Time To Critical Failure (MTTCF), reliability on specific time and Operational Readiness Float (ORF) requirements related to critical failure of Patrol Killer Guided missile (PKG) combat system that is beginning of naval combat system developed in-country. Methods of analysis is applied parametric and non-parametric statistical techniques. It is compared to the estimates and proposed applications. The result of study shows that parametric and non-parametric estimators should be applied differently depending on purpose of utilization based on test of normality. For the first time, this study is offering Reliability of ROK Naval combat system to stakeholders involved with defense improvement project. Decision makers of defense improvement project have to active support and effort in this area for improvement of System Engineering.
4,200원
7.
2016.12
구독 인증기관 무료, 개인회원 유료
Compound logistics is a service aimed to enhance logistics efficiency by supporting that shippers and consigners jointly use logistics facilities. Many of these services have taken place both domestically and internationally, but the joint logistics services for e-commerce have not been spread yet, since the number of the parcels that the consigners transact business is usually small. As one of meaningful ways to improve utilization of compound logistics, we propose a brokerage service for shipper and consigners based on the hybrid recommendation system using very well-known classification and clustering methods. The existing recommendation system has drawn a relatively low satisfaction as it brought about one-to-one matches between consignors and logistics vendors in that such matching constrains choice range of the users to one-to-one matching each other. However, the implemented hybrid recommendation system based brokerage agent service system can provide multiple choice options to mutual users with descending ranks, which is a result of the recommendation considering transaction preferences of the users. In addition, we applied feature selection methods in order to avoid inducing a meaningless large size recommendation model and reduce a simple model. Finally, we implemented the hybrid recommendation system based brokerage agent service system that shippers and consigners can join, which is the system having capability previously described functions such as feature selection and recommendation. As a result, it turns out that the proposed hybrid recommendation based brokerage service system showed the enhanced efficiency with respect to logistics management, compared to the existing one by reporting two round simulation results.
4,000원
8.
2016.12
구독 인증기관 무료, 개인회원 유료
The purpose of this study was to explore olfactory sensitivity of odors from injection molding processing. To do this, the experiment was carried out in an injection molding factory, and participants were exposed to the environment where odor-substances (Formaldehyde, Benzene, Toluene, Ethylbenzene, Xylene, Styrene) exist. In addition, we used the subjective scale using semantic adjectives as an olfactory sensitivity. As a result, the assessment structure of olfactory sensitivity was composed of eight factors (irritant, thermal, tense, unique, like-dislike, active, stable, masculine), and the main factor which was irritant characteristics explained 20% of the total olfactory sensibility. These results suggested that odors from injection molding processing would cause more negative emotional responses than the flavor which is mainly used in olfactory sensitivity. This study, as a basic study of the improvement in a factory environment for the efficiency of work, has limits in that it was conducted to the extent of identifying the olfactory sensitivity structure of those who were at a laboratory and who were exposed to the environment of odor substance induced in the injection molding processing. Therefore, for the method of removing malodorous substance, the effect of materials which can neutralize it, and the comparison of a direct performance in the environment where negative sensitivity structure exists, a series of studies which aim to improve the environment of injection molding factories, such as performance assessment in the environment of a factory and an office need to be conducted. It is expected that when these studies are put together, the improvement guidelines will be provided as a type that can maximize the effectiveness of work in the factory environment where injection molding processing is done.
4,000원
9.
2016.12
구독 인증기관 무료, 개인회원 유료
The market size of plant projects in overseas is so large that domestic EPC project contractors are actively seeking the overseas projects and then trying to meet completion plans since successful fulfillment of these projects can provide great opportunities for them to expand into new foreign markets. International EPC projects involve all of the uncertainties common to domestic projects as well as uncertainties specific to foreign projects including marine transportation, customs, regulations, nationality, culture and so on. When overseas project gets off-schedule, the resulting uncertainty may trigger unexpected exceptions and then critical effects to the project performance. It usually require much more time and costs to encounter these exceptions in foreign sites compared to domestic project sites. Therefore, an exception handling approach is required to manage exceptions effectively for successful project progress in foreign project sites.In this research, we proposed a methodology for prediction and evaluation of exceptions caused by risks in international EPC projects based on sensitivity analysis and Bayesian Networks. First, we identified project schedule risks and related exceptions, which may meet during the fulfillment of foreign EPC projects that is performed in a sequence of engineering, procurement, preparatory manufacture, foreign shipping, construction, inspection and modification activities, and affect project performance, using literature review and expert interviews. The impact of exceptions to the schedule delay were also identified. Second, we proposed a methodology to predict the occurrence of exceptions caused by project risks and evaluate them. Using sensitivity analysis, we can identify activities that critically affect schedule delay and need to focus by priority. Then, we use Bayesian Networks to predict and evaluate exceptions. Third, we applied the proposed methodology to an international EPC project example to validate the proposed approach. Finally, we concluded the research with the further research topics. We expect that the proposed approach can be extended to apply in exception management in project management.
4,000원
10.
2016.12
구독 인증기관 무료, 개인회원 유료
Distributed genetic algorithm (DGA), also known as island model or coarse-grained model, is a kind of parallel genetic algorithm, in which a population is partitioned into several sub-populations and each of them evolves with its own genetic operators to maintain diversity of individuals. It is known that DGA is superior to conventional genetic algorithm with a single population in terms of solution quality and computation time. Several researches have been conducted to evaluate effects of parameters on GAs, but there is no research work yet that deals with structure of DGA. In this study, we tried to evaluate performance of various genetic algorithms (GAs) for the famous symmetric traveling salesman problems. The considered GAs include a conventional serial GA (SGA) with IGX (Improved Greedy Crossover) and several DGAs with various combinations of crossover operators such as OX (Order Crossover), DPX (Distance Preserving Crossover), GX (Greedy Crossover), and IGX. Two distinct immigration policies, conventional noncompetitive policy and newly proposed competitive policy are also considered. To compare performance of GAs clearly, a series of analysis of variance (ANOVA) is conducted for several scenarios. The experimental results and ANOVAs show that DGAs outperform SGA in terms of computation time, while the solution quality is statistically the same. The most effective crossover operators are revealed as IGX and DPX, especially IGX is outstanding to improve solution quality regardless of type of GAs. In the perspective of immigration policy, the proposed competitive policy is slightly superior to the conventional policy when the problem size is large.
4,000원
11.
2016.12
구독 인증기관 무료, 개인회원 유료
Incremental sheet forming (ISF) is a highly versatile and flexible process for rapid manufacturing of complex sheet metal parts. Compared to conventional sheet forming processes, ISF is of a clear advantage in manufacturing small batch or customized parts. ISF needs die-less machine alone, while conventional sheet forming requires highly expensive facilities like dies, molds, and presses. This equipment takes long time to get preparation for manufacturing. However, ISF does not need the full facilities nor much cost and time. Because of the facts, ISF is continuously being used for small batch or prototyping manufacturing in current industries.However, spring-back induced in the process of incremental forming becomes a critical drawback on precision manufacturing. Since sheet metal, being a raw material for ISF, has property to resilience, spring-back would come in the case.It is the research objective to investigate how geometrical shaping parameters make effect on shape dimensional errors. In order to analyze the spring-back occurred in the process, this study experimented on Al 1015 material in the ISF. The statistical tool employed experimental design with factors. The table of orthogonal arrays of L8 (27) are used to design the experiments and ANOVA method are employed to statistically analyze the collected data. The results of the analysis from this study shows that the type of shape and the slope of bottom are the significant, whereas the shape size, the shape height, and the side angle are not significant factors on dimensional errors. More error incurred on the pyramid than on the circular type in the experiments. The sloped bottom showed higher errors than the flat one.
4,000원
12.
2016.12
구독 인증기관 무료, 개인회원 유료
As information system is getting higher and amount of information assets is increasing, skills of threatening subjects are more advanced, so that it threatens precious information assets of ours. The purpose of this study is to present a strategic direction for the types of companies seeking access to information security. The framework classifies companies into eight types so company can receive help in making decisions for the development of information security strategy depending on the type of company it belongs to. Paired comparison method survey conducted by a group of information security experts to determine the priority and the relative importance of information security management elements. The factors used in the security response strategy are the combination of the information security international certification standard ISO 27001, domestic information protection management system certification K-ISMS, and personal information security management system certification PIMS. Paired comparison method was then used to determine strategy alternative priorities for each type. Paired comparisons were conducted to select the most applicable factors among the 12 strategic factors. Paired comparison method questionnaire was conducted through e-mail and direct questionnaire survey of 18 experts who were engaged in security related tasks such as security control, architect, security consulting. This study is based on the idea that it is important not to use a consistent approach for effective implementation of information security but to change security strategy alternatives according to the type of company. The results of this study are expected to help the decision makers to produce results that will serve as the basis for companies seeking access to information security first or companies seeking to establish new information security strategies.
4,000원
13.
2016.12
구독 인증기관 무료, 개인회원 유료
MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer’s order is received. Manufacturing after receiving customer’s orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or ‘mass customization’ defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company’s costs increase, profits fall, and it make more difficult to survive in the competition.Based on the customer’s order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.
4,200원
14.
2016.12
구독 인증기관 무료, 개인회원 유료
Stress is resistance to stimuli to destroy a balance of mind and body in order to maintain an original steady state : A type of response and avoidance. Mild stress, which happens in tension, has a positive effect to improve concentration, but most of stress is likely to be a main factor to damage health. This is because it causes physical ailments and psychological diseases (e.g., depression, anger, frustration, loneliness, and anxiety). The purpose of this study is to analyze the difference between two groups, daytime and night university students, on ego-state, stressors, and stress coping types to improve their academic achievement by reducing their stress. There were 266 university students, who participated in a survey from November 30, 2015 until September 30, 2016. The study employed three measuring instruments : Ego-gram, stressor scale, and stress coping type scale. All the collected data were analyzed through regression analysis and t-test. The results of the regression analysis showed no significant differences in ego-state, stressors, and stress coping types between two groups. However, the results of t-test showed significant difference between the two groups : In terms of ego-state, a CP (Critical Parent) average of the night university students was significantly higher than the daytime university students’. Also, there is a significant difference in employment, future issues, and economic issues : the daytime university students considered employment and future issues more serious, while the night university students had more mental burdens of economic issues. When it comes to coping stress types, there was no significant difference between the two groups.
4,000원
15.
2016.12
구독 인증기관 무료, 개인회원 유료
The external R&D, which includes the adoption of the external technology and knowledge in addition to the internal R&D, is one of important factors for the innovation. Especially for small and medium-sized enterprises (SMEs), the external R&D has been considered as a key factor to carry out the innovation more efficiently due to the limitations of their resources and capacities. However, most of extant studies related to external R&D have focused on analyzing the influence of external R&D on innovation outputs or outcomes. Only a few studies have explored the impact of external R&D on the innovation efficiency. This study therefore investigates whether the external R&D effects the industry’s innovation efficiency and productivity. On this study, we used Korean manufacturing industry data of SMEs from 2012 to 2014 and employed a global Malmquist productivity analysis technique, which is based on the Data Envelopment Analysis (DEA), to assess the innovation efficiency and productivity. Innovation performances of external R&D group and internal R&D group are compared. Then, the sectoral patterns of both innovation efficiency and productivity are analyzed with respect to the technological intensity, which is introduced by OECD. The results show that the gap of innovation efficiency between external and internal R&D groups has gradually decreased because of the continuous improvement of the external R&D group’s performance, while the external R&D group lag behind the internal R&D group. In addition, patterns of the innovation efficiency and productivity change were different depending on the technological intensity, which means that the higher the technological intensity, the greater the effect of external R&D.
4,300원
16.
2016.12
구독 인증기관 무료, 개인회원 유료
In recent years, business environment is faced with multi uncertainty that have not been suffered in the past. As supply chain is getting expanded and longer, the flow of information, material and production is also being complicated. It is well known that development service industry using application software has various uncertainty in random events such as supply and demand fluctuation of developer’s capcity, project effective date after winning a contract, manpower cost (or revenue), subcontract cost (or purchase), and overrun due to developer’s skill-level. This study intends to social contribution through attempts to optimize enterprise’s goal by supply chain management platform to balance demand and supply and stochastic programming which is basically applied in order to solve uncertainty considering economical and operational risk at solution supplier. In Particular, this study emphasizes to determine allocation of internal and external manpower of developers using S&OP (Sales & Operations Planning) as monthly resource input has constraint on resource’s capability that shared in industry or task. This study is to verify how Stochastic Programming such as Markowitz’s MV (Mean Variance) model or 2-Stage Recourse Model is flexible and efficient than Deterministic Programming in software enterprise field by experiment with process and data from service industry which is manufacturing software and performing projects. In addition, this study is also to analysis how profit and labor input plan according to scope of uncertainty is changed based on Pareto Optimal, then lastly it is to enumerate limitation of the study extracted drawback which can be happened in real business environment and to contribute direction in future research considering another applicable methodology.
4,000원
