간행물
한국산업경영시스템학회지 KCI 등재 Journal of Society of Korea Industrial and Systems Engineering
- 발행기관 한국산업경영시스템학회
- 자료유형 학술지
- 간기 계간
- ISSN 2005-0461 (Print)2287-7975 (Online)
- 수록기간 1978 ~ 2024
- 주제분류 공학 > 산업공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
Vol. 46 No. 3 (2023년 9월) 29건
1.
2023.09
구독 인증기관 무료, 개인회원 유료
Na-Yun Park, Ji-Hoon Kim, Tae-Min Kim, Kyeong-Jin Song, Yu-Jin Byun, Min-Ju Kang, Kyungkoo Jun, Jae-Gon Kim
In the realm of dental prosthesis fabrication, obtaining accurate impressions has historically been a challenging and inefficient process, often hindered by hygiene concerns and patient discomfort. Addressing these limitations, Company D recently introduced a cutting-edge solution by harnessing the potential of intraoral scan images to create 3D dental models. However, the complexity of these scan images, encompassing not only teeth and gums but also the palate, tongue, and other structures, posed a new set of challenges. In response, we propose a sophisticated real-time image segmentation algorithm that selectively extracts pertinent data, specifically focusing on teeth and gums, from oral scan images obtained through Company D's oral scanner for 3D model generation. A key challenge we tackled was the detection of the intricate molar regions, common in dental imaging, which we effectively addressed through intelligent data augmentation for enhanced training. By placing significant emphasis on both accuracy and speed, critical factors for real-time intraoral scanning, our proposed algorithm demonstrated exceptional performance, boasting an impressive accuracy rate of 0.91 and an unrivaled FPS of 92.4. Compared to existing algorithms, our solution exhibited superior outcomes when integrated into Company D's oral scanner. This algorithm is scheduled for deployment and commercialization within Company D's intraoral scanner.
4,000원
2.
2023.09
구독 인증기관 무료, 개인회원 유료
Recently, the importance of impact-based forecasting has increased along with the socio-economic impact of severe weather have emerged. As news articles contain unconstructed information closely related to the people’s life, this study developed and evaluated a binary classification algorithm about snowfall damage information by using media articles text mining. We collected news articles during 2009 to 2021 which containing ‘heavy snow’ in its body context and labelled whether each article correspond to specific damage fields such as car accident. To develop a classifier, we proposed a probability-based classifier based on the ratio of the two conditional probabilities, which is defined as I/O Ratio in this study. During the construction process, we also adopted the n-gram approach to consider contextual meaning of each keyword. The accuracy of the classifier was 75%, supporting the possibility of application of news big data to the impact-based forecasting. We expect the performance of the classifier will be improve in the further research as the various training data is accumulated. The result of this study can be readily expanded by applying the same methodology to other disasters in the future. Furthermore, the result of this study can reduce social and economic damage of high impact weather by supporting the establishment of an integrated meteorological decision support system.
4,000원
3.
2023.09
구독 인증기관 무료, 개인회원 유료
BNKT Ceramics, one of the representative Pb free based piezoelectric ceramics, constitutes a perovskite(ABO3) structure. At this time, the perovskite structure (ABO3) is in the form where the corners of the octahedrons are connected, and in the unit cell, two ions, A and B, are cations, A ion is located at the body center, B ion is located at each corner, and an anion O is located at the center of each side. Since Bi, Na, and K sources constituting the A site are highly volatile at a sintering temperature of 1100℃ or higher, it is difficult to maintain uniformity of the composition. In order to solve this problem, there should be suppression of volatilization of the A site material or additional compensation of the volatilized. In this study, the basic composition of BNKT Ceramics was set to Bi0.5(Na0.78K0.22)0.5TiO3 (= BNKT), and volatile site (Bi, Na, and K sources) were coated in the form of a shell to compensate additionally for the A site ions. In addition, the physical and electrical properties of BNKT and its coated with shell additives(= @BNK) were compared and analyzed, respectively. As a result of analyzing the crystal structure through XRD, both BNKT(Core) and @BNK(Shell) had perovskite phases, and the crystallinity was almost similar. Although the Curie temperature of the two sintered bodies was almost the same (TC = 290 ~ 300 ℃), it was confirmed that the d33 (piezoelectric coefficient) and Pr (residual polarization) values were different. The experimental results indicated that the additional compensation for a shell additive causes the coarsening, resulting in a decrease in sintering density and Pr(remanent polarization). However, coating shell additives to compensate for A site ion is an effective way to suppress volatilization. Based on these experimental results, it would be the biggest advantage to develop an eco-friendly material (Lead-free) that replaced lead (Pb), which is harmful to the human body. This lead-free piezoelectric material can be applied to a biomedical device or products(ex. earphones (hearing aids), heart rate monitors, ultrasonic vibrators, etc.) and skin beauty improvement products (mask packs for whitening and wrinkle improvement).
4,000원
4.
2023.09
구독 인증기관 무료, 개인회원 유료
In this study, a smart bench was developed and researched smart benches that can contribute to user convenience and satisfaction by installing them in parks, bus stops, and tourist attractions in line with the rapidly changing construction of smart cities. The smart bench is automatically operated by the control system according to the external temperature and provides additional functions such as charging, lighting, and advertising to improve general bench functions as well as heating in winter and cooling in summer, making it suitable for smart urbanization. The developed smart bench is designed to be strong enough to withstand loads of about 2,500 N. It minimizes the visible parts such as assembled bolts and 220V power supply wires, It can also give aesthetic effects. The development was carried out with the aim of waterproofing and dustproofing of IP44 grade in accordance with the climate of Republic of Korea, which has four seasons, and it is advantageous for long-term use because the paint was selected for the weather ability (discoloration) grade 3 or higher. If smart bench is commercialized, it is believed that various options can be provided to the smart bench market, where buyers had few product options, as the parts were developed in an assembled type so that all functions can be responded in an optional form according to the installation environment and the buyer's budget.
4,000원
5.
2023.09
구독 인증기관 무료, 개인회원 유료
Recently, there are some outdoor floor advertising lighting devices as one of the active marketing methods. However, for outdoor use, there are many restrictions due to the Outdoor Advertisement Act, according to requiring high-output heat generation, waterproofing, and AC power, etc. The purpose of this study is to develop a Duo Light product optimized for indoor use through publicity and information guidance in normal times and automatic evacuation route guidance display in case of disaster, in conjunction with disaster safety. To that end, patent search and patent association analyses were conducted, and a comparative analysis with commercial products was conducted as a case study. In addition, prototypes were designed and produced through the review of operation principles, where field environment surveys and self-tests were conducted. Also, technology roadmaps were presented by preparing plans for expandability and advancement of products. For the analysis of technology commercialization, the feasibility of technology commercialization was examined through the analysis of Jolly’s Model and Lean Canvas Model. The results of this study will be able to contribute to minimize human damage through the effective response to disasters, which can increase the effect of indoor advertising by using the proposed indoor floor advertising lighting device in advertising and disaster situations.
4,000원
6.
2023.09
구독 인증기관 무료, 개인회원 유료
This study identifies the commercialization success factors that can be an important indicator for the transfer and commercialization of national R&D results in the agricultural sector. Unlike other industries, the agricultural sector has a non-systematically scaled and processed industrial structure, and R&D is led by government rather than the private sector. Although the quantitative performance of national agricultural R&D, especially the number of patents and publications, has increased rapidly with the quantitative expansion of the government R&D budget, the technology commercialization of the results of agricultural R&D has been accompanied by difficulties for SMEs. Therefore, this study summarized the success factors for commercialization of state-owned technologies presented in previous studies, and based on them, analysed the success factors for commercialization specific to the agricultural sector. It also conducted a questionnaire survey using Delphi and focus group interviews (FGI) with experts from academia, research and industry, and a survey of agricultural companies to derive success factors for commercialization in the agricultural sector using logistic regression analysis. As a result, five indicators with positive correlation and three indicators with negative correlation within technology characteristics, suppliers, adopters, policy and market factors were finally derived as key factors for agricultural commercialization. In the future, it is expected that independent factor analysis of the food and seed sectors, which have independent industry characteristics from the agricultural sector, will be needed.
5,200원
7.
2023.09
구독 인증기관 무료, 개인회원 유료
Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.
4,000원
8.
2023.09
구독 인증기관 무료, 개인회원 유료
Recently, carbon composites have been applied to various fields. However, carbon composites have not been applied to the fishing vessel field due to its structure standards centered on glass composites. In this study, a structural strength evaluation study was conducted for the application of carbon composites in the fishing vessel field. Hull minimum thickness verification test and hull joint verification test were conducted. Compared to glass composites, the verification was based on equivalent or better performance. The results show that carbon composites can reduce the weight by 20% compared to glass composites. For hull joints, it was necessary to increase the thickness of the joint seam by the thickness of the hull to apply carbon composite. Through this study, a standard for the application of carbon composites to fishing vessel can be established.
4,000원
9.
2023.09
구독 인증기관 무료, 개인회원 유료
The increasing number of technology transfers from public research institutes in Korea has led to a growing demand for patent recommendation platforms for SMEs. This is because selecting the right technology for commercialization is a critical factor in business success. This study developed a patent recommendation system that uses technology transfer data from the past 10 years to recommend patents that are suitable for SMEs. The system was developed in three stages. First, an item-based collaborative filtering system was developed to recommend patents based on the similarities between the patents that SMEs have previously transferred. Next, a content-based recommendation system based on TF-IDF was developed to analyze patent names and recommend patents with high similarity. Finally, a hybrid system was developed that combines the strengths of both recommendation systems. The experimental results showed that the hybrid system was able to recommend patents that were both similar and relevant to the SMEs' interests. This suggests that the system can be a valuable tool for SMEs that are looking to acquire new technologies.
4,200원
10.
2023.09
구독 인증기관 무료, 개인회원 유료
Recently, as ESG management has become an important issue, major companies in the automotive parts manufacturing industry are conducting ESG evaluations of their suppliers for the purpose of supply chain management. The results of these evaluations are being incorporated into contractual agreements. However, many small and medium-sized enterprises(SMEs) are lacking in their capacity and resources to effectively respond to ESG evaluations. Furthermore, existing ESG management guidelines do not provide an industry-specific guidance, making it necessary to establish industry-specific guidelines that SMEs can refer to. Therefore, in this study, the evaluation Indicators of ESG supply chain assessments are surveyed, which is conducted by domestic major automotive parts companies and global automobile manufacturers. Then 56 supply chain ESG evaluation Indicators are derived. Also, ESG management indicators for SMEs is analyzed through the Importance-Performance Analysis(IPA), based on an interview of expert groups. Therefore, this study could propose industry-specific ESG guidelines, based on the results of the derived indicators, which reflects the need for SMEs to practice ESG management within certain boundaries.
4,300원
11.
2023.09
구독 인증기관 무료, 개인회원 유료
Although the proportion of coal-fired power generation is decreasing, efficient operating technology is needed to continuously invest in facilities and reduce maintenance costs until it is abolished. Boilers, one of the main facilities of power plants, operate for a long time in harsh environments of high temperature and high pressure. In addition, damage due to deterioration is likely to occur depending on the fuel and tube material used. It is very important to judge soundness because damage caused by deterioration adversely affects facility operation. Previously, replication method was used to analyze the progress of deterioration. In the replication method, pre-treatment such as chemical treatment is performed on the boiler tube in the field, the area is reproduced by attaching a film, and the replicated film is determined by an expert in the laboratory with an expensive microscope. However, this method involves substantial costs and time requirements, as well as the possibility of human errors. To address these issues, we developed a mobile health assessment system in this research. Since it is detachable and takes images in real time, this system enables swift evaluations across a broad range and facilitates the assessment of preprocessing quality. In addition, it was intended to reduce existing human mistakes by developing a degradation classification algorithm using the merger cluster method.
4,000원
12.
2023.09
구독 인증기관 무료, 개인회원 유료
As platforms become primary decision making tools, platforms for decision have been introduced to improve quality of decision results. Because, decision platforms applied augmented decision-making process which uses experiences and feedback of users. This process creates a variety of alternatives tailored for users’ abilities and characteristics. However, platform users choose alternatives before considering significant quality factors based on securing decision quality. In real world, platform managers use an algorithm that distorts appropriate alternatives for their commercial benefits. For improving quality of decision-making, preceding researches approach trying to increase rational decision -making ability based on experiences and feedback. In order to overcome bounded rationality, users interact with the machine to approach the optional situation. Differentiated from previous studies, our study focused more on characteristics of users while they use decision platforms. This study investigated the impact of quality factors on decision-making using platforms, the dimensions of systematic factors and user characteristics. Systematic factors such as platform reliability, data quality, and user characteristics such as user abilities and biases were selected, and measuring variables which trust, satisfaction, and loyalty of decision platforms were selected. Based on these quality factors, a structural equation research model was created. A survey was conducted with 391 participants using a 7-point Likert scale. The hypothesis that quality factors affect trust was proved to be valid through path analysis of the structural equation model. The key findings indicate that platform reliability, data quality, user abilities, and biases affect the trust, satisfaction and loyalty. Among the quality factors, group bias of users affects significantly trust of decision platforms. We suggest that quality factors of decision platform consist of experience-based and feedback-based decision-making with the platform's network effect. Through this study, the theories of decision-making are empirically tested and the academic scope of platform-based decision-making has been further developed.
4,600원
13.
2023.09
구독 인증기관 무료, 개인회원 유료
A Study on the Health Index Based on Degradation Patterns in Time Series Data Using ProphetNet Model
The Fourth Industrial Revolution and sensor technology have led to increased utilization of sensor data. In our modern society, data complexity is rising, and the extraction of valuable information has become crucial with the rapid changes in information technology (IT). Recurrent neural networks (RNN) and long short-term memory (LSTM) models have shown remarkable performance in natural language processing (NLP) and time series prediction. Consequently, there is a strong expectation that models excelling in NLP will also excel in time series prediction. However, current research on Transformer models for time series prediction remains limited. Traditional RNN and LSTM models have demonstrated superior performance compared to Transformers in big data analysis. Nevertheless, with continuous advancements in Transformer models, such as GPT-2 (Generative Pre-trained Transformer 2) and ProphetNet, they have gained attention in the field of time series prediction. This study aims to evaluate the classification performance and interval prediction of remaining useful life (RUL) using an advanced Transformer model. The performance of each model will be utilized to establish a health index (HI) for cutting blades, enabling real-time monitoring of machine health. The results are expected to provide valuable insights for machine monitoring, evaluation, and management, confirming the effectiveness of advanced Transformer models in time series analysis when applied in industrial settings.
4,900원
14.
2023.09
구독 인증기관 무료, 개인회원 유료
The metal bush assembling process is a process of inserting and compressing a metal bush that serves to reduce the occurrence of noise and stable compression in the rotating section. In the metal bush assembly process, the head diameter defect and placement defect of the metal bush occur due to metal bush omission, non-pressing, and poor press-fitting. Among these causes of defects, it is intended to prevent defects due to omission of the metal bush by using signals from sensors attached to the facility. In particular, a metal bush omission is predicted through various data mining techniques using left load cell value, right load cell value, current, and voltage as independent variables. In the case of metal bush omission defect, it is difficult to get defect data, resulting in data imbalance. Data imbalance refers to a case where there is a large difference in the number of data belonging to each class, which can be a problem when performing classification prediction. In order to solve the problem caused by data imbalance, oversampling and composite sampling techniques were applied in this study. In addition, simulated annealing was applied for optimization of parameters related to sampling and hyper-parameters of data mining techniques used for bush omission prediction. In this study, the metal bush omission was predicted using the actual data of M manufacturing company, and the classification performance was examined. All applied techniques showed excellent results, and in particular, the proposed methods, the method of mixing Random Forest and SA, and the method of mixing MLP and SA, showed better results.
4,000원
15.
2023.09
구독 인증기관 무료, 개인회원 유료
The air transport industry is experiencing unprecedented fluctuations in aviation demand through the Covid-19 pandemic, and is more focused than ever on maintaining and generating business profitability. During the pandemic, demand for air cargo has soared, and the conversion business from passenger aircrafts to freighters(P2F) is drawing attention as a new business in the aviation maintenance industry. This study derives important factors to be considered in order to successfully carry out the P2F project through a wide range of cases and related literature, and analyzes the relative importance of each factor using the analytic hierarchy process. Through a survey of 33 aviation maintenance experts with more than 20 years of field experience, the importance of main factors and their sub factors was determined and implications were drawn. As a primary result, in order to succeed in the P2F project, the main factors were identified in the order of skill, finance, and location. The most important sub factors for each main factors were identified in order of securing airframe modification skill, securing infrastructure construction cost, and creating P2F business complex and district. The quantified success factors suggested the critical direction for the successful development of Korea's P2F business, and presented viable and specific business strategies and implementation plans for each factors.
4,500원
16.
2023.09
구독 인증기관 무료, 개인회원 유료
Degenerative arthritis is a common joint disease that affects many elderly people and is typically diagnosed through radiography. However, the need for remote diagnosis is increasing because knee pain and walking disorders caused by degenerative arthritis make face-to-face treatment difficult. This study collects three-dimensional joint coordinates in real time using Azure Kinect DK and calculates 6 gait features through visualization and one-way ANOVA verification. The random forest classifier, trained with these characteristics, classified degenerative arthritis with an accuracy of 97.52%, and the model's basis for classification was identified through classification algorithm by features. Overall, this study not only compensated for the shortcomings of existing diagnostic methods, but also constructed a high-accuracy prediction model using statistically verified gait features and provided detailed prediction results.
4,000원
17.
2023.09
구독 인증기관 무료, 개인회원 유료
The advent of big data has brought about the need for analytics. Natural language processing (NLP), a field of big data, has received a lot of attention. Topic modeling among NLP is widely applied to identify key topics in various academic journals. The Korean Society of Industrial and Systems Engineering (KSIE) has published academic journals since 1978. To enhance its status, it is imperative to recognize the diversity of research domains. We have already discovered eight major research topics for papers published by KSIE from 1978 to 1999. As a follow-up study, we aim to identify major topics of research papers published in KSIE from 2000 to 2022. We performed topic modeling on 1,742 research papers during this period by using LDA and BERTopic which has recently attracted attention. BERTopic outperformed LDA by providing a set of coherent topic keywords that can effectively distinguish 36 topics found out this study. In terms of visualization techniques, pyLDAvis presented better two-dimensional scatter plots for the intertopic distance map than BERTopic. However, BERTopic provided much more diverse visualization methods to explore the relevance of 36 topics. BERTopic was also able to classify hot and cold topics by presenting ‘topic over time’ graphs that can identify topic trends over time.
4,900원
18.
2023.09
구독 인증기관 무료, 개인회원 유료
In this study, we focus on the improvement of data quality transmitted from a weather buoy that guides a route of ships. The buoy has an Internet-of-Thing (IoT) including sensors to collect meteorological data and the buoy’s status, and it also has a wireless communication device to send them to the central database in a ground control center and ships nearby. The time interval of data collected by the sensor is irregular, and fault data is often detected. Therefore, this study provides a framework to improve data quality using machine learning models. The normal data pattern is trained by machine learning models, and the trained models detect the fault data from the collected data set of the sensor and adjust them. For determining fault data, interquartile range (IQR) removes the value outside the outlier, and an NGBoost algorithm removes the data above the upper bound and below the lower bound. The removed data is interpolated using NGBoost or long-short term memory (LSTM) algorithm. The performance of the suggested process is evaluated by actual weather buoy data from Korea to improve the quality of ‘AIR_TEMPERATURE’ data by using other data from the same buoy. The performance of our proposed framework has been validated through computational experiments based on real-world data, confirming its suitability for practical applications in real- world scenarios.
4,300원
19.
2023.09
구독 인증기관 무료, 개인회원 유료
In order to enhance competitiveness in the industry, financial companies are building a high level of customer satisfaction and repurchase intention by further strengthening not only the technical quality of the platform business but also the customer-oriented service quality. Theoretically, it is time for a theoretical review of whether the expansion of service quality using platform business in the financial industry is directly linked to the performance of financial companies, such as satisfaction and repurchase intention of existing customers. Based on the rapid growth of mobile and the main activities of financial platform companies above, This study attempted to test a significant impact on customer satisfaction and reuse intention on information services and system services, which are service quality of mobile financial platforms. Even if a number of financial companies compete with each other, they could survive by dividing the market, In the digital environment, customers have free access, so the winner can monopolize the market. It is an environment in which customers can move to platform companies that provide better services. The contents presented through the results in this study will be able to be used strategically in terms of the implementation and operation of the financial platform. In addition, it served as an opportunity to find independent variables that affect customer satisfaction and reuse intention, which are financial platform service quality, and suggested the possibility of continuous development of the platform in the future. In summary, the service quality of financial platforms can further expand users by emphasizing user visibility in terms of information services and utilizing user-centered financial platforms that increase customer satisfaction and reliability by strengthening the responsiveness and ease of system services. This study is of important value and is believed to have laid an important foundation for future research.
4,200원
20.
2023.09
구독 인증기관 무료, 개인회원 유료
Recently, defects that occurred during the construction of apartment houses have become a social issue. Defects in apartment houses lead to waste of resources and economic loss, causing psychological and physical damage to customers, and a decrease in reliability and financial loss to construction companies. The purpose of this study was to analyze the impact of defect occurrence according to the difference in project management level in the apartment housing construction stage, and to investigate the extent to which the project manager's experience affects the defect occurrence rate. For the empirical analysis of the study, statistical analysis was conducted using data collected from 130 actual projects. The results of the analysis showed that schedule management, cost management, and quality management had a positive effect on reducing the defect occurrence rate in the execution stage of apartment housing construction, while human resource management productivity had a negative effect. This study theoretically demonstrated the importance of project management, and in practice, showed that schedule management, cost management, and quality management should be faithfully performed in the execution stage to reduce the rate of defects after project completion. It was also suggested that hiring an experienced project manager would help reduce project defects.
4,300원
1
2
