간행물
한국산업경영시스템학회지 KCI 등재 Journal of Society of Korea Industrial and Systems Engineering
- 발행기관 한국산업경영시스템학회
- 자료유형 학술지
- 간기 계간
- ISSN 2005-0461 (Print)2287-7975 (Online)
- 수록기간 1978 ~ 2024
- 주제분류 공학 > 산업공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
Vol. 36 No. 3 (2013년 9월) 17건
1.
2013.09
구독 인증기관 무료, 개인회원 유료
This paper is a case study of reliability assessment with field warranty data of Clutch Master Cylinder (CMC) in hydraulic clutch system. We estimate lifetime distribution using field warranty data which contain much useful information for understanding reliability of the system in the real-world environments. However, the estimated parameters are far from existing reference values, which seems to be caused right censored field warranty data. To modify the parameters, we use the information of the durability test which is performed to verify that the lifetime of the item meets the required level. After that, we can observe that the modified parameters are closer to the existing reference values. This case study shows a possible idea to supplement lack of right censored field warranty data and its applicability.
4,000원
2.
2013.09
구독 인증기관 무료, 개인회원 유료
Determining relative importance among many quality attributes under financial constraints is an important task. The weighted value of an attribute particularly in QFD, will influence on engineering characteristics and this will eventually influence the whole manufacturing process such as parts deployment, process planning, and production planning. Several scholars have suggested weighting formulas using CSC (Customer Satisfaction Coefficient) in the Kano model. However, previous research shows that the validity of the CSC approaches has not been proved systematically. The aim of the present study is to address drawbacks of CSC and to develop APC (Average Potential Coefficient), a new approach for weighting of quality attributes. For this, the current study investigated 33 quality attributes of e-learning and conducted a survey of 375 university students for the results of APC, the Kano model, and the direct importance of the quality attributes. The results show that the proposed APC is better than other approaches based on the correlation analysis with the results of direct importance. An analysis of e-leaning’s quality perceptions using the Kano model and suggestions for improving e-learning’s service quality are also included in this study.
4,000원
3.
2013.09
구독 인증기관 무료, 개인회원 유료
Release planning in a software product line (SPL) is to select and assign the features of the multiple software products in the SPL in sequence of releases along a specified planning horizon satisfying the numerous constraints regarding technical prece- dence, conflicting priorities for features, and available resources. A greedy genetic algorithm is designed to solve the problems of release planning in SPL which is formulated as a precedence-constrained multiple 0-1 knapsack problem. To be guaranteed to obtain feasible solutions after the crossover and mutation operation, a greedy-like heuristic is developed as a repair operator and reflected into the genetic algorithm. The performance of the proposed solution methodology in this research is tested using a fractional factorial experimental design as well as compared with the performance of a genetic algorithm developed for the software release planning. The comparison shows that the solution approach proposed in this research yields better result than the genetic algorithm.
4,000원
4.
2013.09
구독 인증기관 무료, 개인회원 유료
This study investigates the current status of the green growth policies of Korean public corporations and proposes some potential improvement ideas. A set of twenty global green trends are first elicited by using classified macro trends of environmental changes. The green trends are categorized into four key issues based on which domestic and international research efforts are compared. The management performance reports of Korean public corporations are then throughly analyzed to evaluate the validity of their strategic green tasks in relevant to the global green trends. Finally, we suggest some potential government policies for enhancing the existing green growth businesses of public corporations.
4,000원
5.
2013.09
구독 인증기관 무료, 개인회원 유료
In this study, we develop a method for analyzing business process based on the event-driven process chain (EPC) model. The method consists of five stages such as identifying abnormal events, finding causes for the abnormal events and problems caused by the abnormal events, making cause-and-effect chains, drawing root-cause map, and defining improvement areas. We illustrate how to apply the method with some examples for the domestic registered mail delivery process.
4,000원
6.
2013.09
구독 인증기관 무료, 개인회원 유료
In this paper, the single-period inventory problem, what is called newsboy problem, has been revisited with two different conditions, uncertain supply and risk-averseness. Eeckhoudt et al. [5] investigated the effect of risk-averseness of a newsboy on the optimal order quantity in a stochastic demand setting. In contrary to Eeckhoudt et al. [5] this paper investigates the effect of risk-averseness in a stochastic supply setting. The findings from this investigation say that if represents the optimal order quantity without risk-averseness then the risk-averse optimal order quantity can be greater than and can be less than as well.
4,000원
7.
2013.09
구독 인증기관 무료, 개인회원 유료
We propose a method using QFD for design the hierarchical structure of AHP. This method provides definition for each area of House of Quality and design the hierarchical structure of the bottom-up QFD/AHP in which the upper hierarchy is designed through the classification of common characteristics with a focus on the lower hierarchy. Finally, we apply it to the development of an evaluation index for selecting heavy lifting service providers. This study has significance as the first instance of designing the archical structure of AHP after objectively verifying whether MECE condition, the basic requirement for AHP design, is satisfied.
4,300원
8.
2013.09
구독 인증기관 무료, 개인회원 유료
Many real world optimization problems are discrete and multi-valued. Meta heuristics including Genetic Algorithm and Particle Swarm Optimization have been effectively used to solve these multi-valued optimization problems. However, extensive comparative study on the performance of these algorithms is still required. In this study, performance of these algorithms is evaluated with multi-modal and multi-dimensional test functions. From the experimental results, it is shown that Discrete Particle Swarm Optimization (DPSO) provides better and more reliable solutions among the considered algorithms. Also, additional experiments shows that solution quality of DPSO is not lowered significantly when bit size representing a solution increases. It means that bit representation of multi-valued discrete numbers provides reliable solutions instead of becoming barrier to performance of DPSO.
4,000원
9.
2013.09
구독 인증기관 무료, 개인회원 유료
An efficient vehicle routing heuristic for different vehicle moving times for forward and backward between two points is studied in this research. Symmetric distance or moving times are assumed to move back and forth between two points in general, but it is not true in reality. Also, various moving speeds along time zones are considered such as the moving time differences between rush hours or not busy daytimes. To solve this type of extremely complicated combinatorial optimization problems, delivery zones are specified and delivery orders are determined for promising results on the first stage. Then delivery orders in each zone are determined to be connected with other zones for a tentative complete delivery route. Improvement steps are followed to get an effective delivery route for unsymmetric-time-varing vehicle moving speed problems. Performance evaluations are done to show the effectiveness of the suggested heuristic using computer programs specially designed and developed using C++.
4,000원
10.
2013.09
구독 인증기관 무료, 개인회원 유료
Recently, the number of smartphone users has skyrocketed because of a plenty of useful services that smartphone applications provide. In the Information Systems (IS) literature, however, there has been little understanding about the effects of the service quality of smatphone applications on user satisfaction and loyalty. Thereby, this study examined 1) the effects of the service quality of smartphone applications on users beliefs, perceived usefulness and easiness and 2) the effects of the user beliefs as mediating variables on users' attitude, satisfaction, and loyalty. A survey was conducted and SEM was employed to analyze the data. The results showed that the service quality of smartphone applications affect users' attitude, satisfaction, and loyalty through the mediating variables.
4,000원
11.
2013.09
구독 인증기관 무료, 개인회원 유료
The progress that becomes a basis for measuring the outcome of project is a core of project control. Follow-up corrective actions are determined depending on the degree of their differences. The methods of measuring the project progress have been developed though a variety of research and many were verified through the cases. Among such methods, this study selected Start/Finish method and Fixed Formula method. In order to check the limitations of the progress utilized in the two methods, the study compared their progresses to the progress of Percentage Complete method and analyzed the differences shown in their actual applications. Through this, it suggested the forms and scale of the projects appropriate to the application of Fixed Formula method. As for the research progress method, the study first generated a number of virtual project schedules for the establishment of an analysis model. These project schedules were varied in a way that they had different project periods and the number of different activities. The study also generated numerous project schedules for difference test. After establishing a virtual schedule plan by the scale of projects, it measured their progresses by period, analyzed the differences and repeated this procedure to obtain the results.
4,000원
12.
2013.09
구독 인증기관 무료, 개인회원 유료
The problem of constrained sequencing of a set of jobs on a conveyor system with the objective of minimizing setup cost is investigated in this paper. A setup cost is associated with extra material, labor, or energy required due to the change of attributes in consecutive jobs at processing stations. A finite set of attributes is considered in this research. Sequencing is constrained by the availability of conveyor junctions. The problem is motivated by the paint purge reduction problem at a major U.S. automotive manufacturer. We first model a diverging junction with a sequence-independent setup cost and predefined attributes as an assignment problem and this model is then extended for a more general situation by relaxing the initial assumptions in various ways.
4,600원
13.
2013.09
구독 인증기관 무료, 개인회원 유료
This study designed a “Diagnostic Model for Management Innovation of Medium Enterprises” based on the theoretical background of success factor and management diagnosis model for management innovation of medium enterprises and suggested a measure for utilization of strategic subject and diagnostic model that enterprises can apply. Utilization of medium enterprises management innovation diagnostic model designed through this study would be of help for making a diagnosis of the capability maturity level of enterprises’ current management system and improving it by establishing a challenging capability objective and building a circulation system capable of innovating enterprises. It is expected for enterprises to overcome growing pains and establish a management system capable of achieving outcome (productivity) by repeating measurement and innovation through management diagnosis. In addition, this study provides a method to produce a strategic subject, select priority of implementation and prepare an implementation road map by classifying and filtering management issues produced as a result of management diagnosis in a systematic way. If variables necessary for production of an objective weighted value of scoring and discover of elements for category of diagnostic model and elementary items as well as design of a self-diagnosis questionnaire, measurement of management outcome suggested in this study can be able to be verified and supplemented through case study in the future, it is expected to make the degree of completion as a diagnostic model elevated that may help for growth and development through innovation of medium enterprises.
4,000원
14.
2013.09
구독 인증기관 무료, 개인회원 유료
This paper deals with the picking batch size which a bi-directional carousel system can be feasible. The items that customers order are retrieved from the bins of carousel with batch size. The mathematical equations representing rotary travel distance and retrieval lead time to pick a given batch size are derived. Rotary travel distance represents the distance which carousel system rotates to retrieve items in a batch. The bi-directional carousel system rotates to minimize the travel distance in retrieving the items in a batch. Rotary travel distance and retrieval lead time are analyzed for the batch size through the simulation approach. From the simulation, the retrieval batch size that carousel system can be feasible is obtained. A numerical example is shown to explain the solution procedure.
4,000원
15.
2013.09
구독 인증기관 무료, 개인회원 유료
In this paper, efficiencies of core technology development projects, conducted by Ministry of Trade, Industry and Energy, are compared. In the process, DEA (Data Envelopment Analysis) is utilized as a main technique for comparing efficiencies. For DEA, input oriented BCC Model is adopted with government grant, recipient expenditure, the number of participating institutions, and project duration as input factors, and the number of patents, the number of papers, and occurred sales as output factors. As a result, next generation mobile communication project turns out to be the most efficient project of all. Therefore, next generation mobile communication project should be benchmarked for the other projects to follow. However, these results should be used only for reference data since every project has a different objective and, of course, is run under a different environment.
4,000원
16.
2013.09
구독 인증기관 무료, 개인회원 유료
The revitalization of e-business via Internet brings big changes to the postal business, and leads to a tremendous increase of heavy and large sized postal mails with continuing growth of home delivery business. Thus, even though the number of intermediate storages for mail delivery that mailmen use for picking up mails in the middle of mail delivery has been being increased, it has still many problems such as insufficient number and size of the storages as well as avoidance of mail keeping of trust agents. It is necessary that safety of mail keeping, seamless mail delivery, and individual parcel pick-up process reestablish- ment should be made through an improved counter plan for the problems described previously. This study presents the efficient and right operational plan for the intermediate storage for mail delivery with providing the number and size of intermediate storages per mail delivery sequence according to four different types of post offices.
4,000원
17.
2013.09
구독 인증기관 무료, 개인회원 유료
Among ammunitions which are stored in a war field, the lifespan of propelling gunpowder is affected by storage environment such as storage temperature, humidity, and exposure to sunlight. These are because Nitrocellulose (NC) which is the main component of propelling gunpowder can be naturally disassembled to unstable substances similar with other nitric acid ester. We can’t prevent it fundamentally from being disassembled, but to restrain induction of automatic disassembly by decomposition product, a decom- position product (NO2, NO3, and HNO3) and tranquillizer DPA (Diphenylamine), having high reactivity, are added into a propellant. For this, it will decrease the velocity of tranquillizer which can also affect the velocity of producing the decomposition product of NC, storage temperature or humidity of propelling gunpowder is higher, drop of tranquillizer content is much faster. Therefore, to extend storage lifespan of propelling gunpowder, it is really important to control storage temperature or humidity inside the magazine. Hereupon, according to the manufacture of small scale model magazine and the result of performing experiments and measuring variation of inside temperature (storage temperature), using roof types that have a steel slate structure of magazine among ground magazines, this research shows the differences in details.
4,000원
