In this study, we introduce a novel TiN/Ag embedded TiO2/FTO resistive random-access memory (RRAM) device. This distinctive device was fabricated using an environmentally sustainable, solution-based thin film manufacturing process. Utilizing the peroxo titanium complex (PTC) method, we successfully incorporated Ag precursors into the device architecture, markedly enhancing its performance. This innovative approach effectively mitigates the random filament formation typically observed in RRAM devices, and leverages the seed effect to guide filament growth. As a result, the device demonstrates switching behavior at substantially reduced voltage and current levels, heralding a new era of low-power RRAM operation. The changes occurring within the insulator depending on Ag contents were confirmed by X-ray photoelectron spectroscopy (XPS) analysis. Additionally, we confirmed the correlation between Ag and oxygen vacancies (Vo). The current-voltage (I-V ) curves obtained suggest that as the Ag content increases there is a change in the operating mechanism, from the space charge limited conduction (SCLC) model to ionic conduction mechanism. We propose a new filament model based on changes in filament configuration and the change in conduction mechanisms. Further, we propose a novel filament model that encapsulates this shift in conduction behavior. This model illustrates how introducing Ag alters the filament configuration within the device, leading to a more efficient and controlled resistive switching process.

In this study, we designed and manufactured a large angular contact ball bearing (LACBB) with low deformation using JIS-SUJ2 steel and analyzed changes in its structural characteristics and chemical composition upon heat treatment. The bearing was produced by hot forging and heat treatment including a quenching and tempering (Q/T) process, and its properties were analyzed using 4 mm thick specimens. A difference in the size distribution of the carbide in the outer and inner parts of the bearing was observed and it was confirmed that large and non-uniform carbide was distributed in the inner part of the bearing. After heat treatment, the hardness value of the outer part increased from 13.4 HRC to 61 HRC and the inner part increased from 8.0 HRC to 59.7 HRC. As a result of X-ray diffraction (XRD) measurements, the volume fraction of the retained austenite contained in the outer part was calculated to be 3.5~4.8 % and the inner part was calculated to be 3.6~5.0 %. The surface chemical composition and the content of chemical bonds were quantified through X-ray photoelectron spectroscopy (XPS), and a decrease in C=C bonds and an increase in Fe-C bonds were confirmed.

시설재배지 고추를 가해하는 꽃노랑총채벌레(Frankliniella occidentalis)를 대상으로 미끌애꽃노린재(Orius laevigatus)를 이용한 생물적 방 제가 검토되고 있다. 그러나 대상 해충의 빠른 집단 성장은 화학 살충제의 투입이 때에 따라 요구된다. 본 연구는 화학 살충제와 천적의 이상적 종합 방제를 구현하기 위한 목적으로 선택성이 높은 살충제 선발 및 이들 살충제 처리 이후 미끌애꽃노린재의 안전한 재투입 시기를 결정하기 위해 수행 되었다. 첫째로 꽃노랑총채벌레에 방제 효과가 높은 상용 살충제가 선발되었다. 총 17종류의 상용 살충제 가운데 5종류(pyriproxyfen+ spinetoram, abamectin, spinosad, acetamiprid, chlorpyrifos) 주성분을 갖는 상용 살충제가 꽃노랑총채벌레에 우수한 방제효과를 주는 약제로 선발되었다. 이들 5종류의 살충제에 대해서 미끌애꽃노린재의 감수성 반응은 꽃노랑총채벌레와 상이하였다. 특별히 아바멕틴과 스피네토람이 유 기인계 또는 네오니코티노이드에 비해 상대적으로 낮은 독성을 보였다. 이들 5종류의 살충제 처리 이후 잔류 독성을 미끌애꽃노린재를 이용하여 생물검정한 결과 유기인계 및 네오니코티노이드 약제는 비교적 오랜 기간 독성을 유지하지만, 아바멕틴과 스피네토람 약제의 경우 3일 이후에는 대상 천적에 피해를 주지 않는 것으로 나타났다. 이러한 잔류독성결과는 LC-MS/MS를 이용한 농약 잔류량 화학분석을 통해 뒷받침되었다. 이상 의 결과는 높은 밀도로 증가한 꽃노랑총채벌레에 대해서 이 해충에 살충성이 높은 아바멕틴 또는 스피네토람의 약제를 살포하고 이후 3일 지나 미 끌애꽃노린재의 투입을 통해 대상 해충의 평균 밀도를 경제적피해수준 이하로 유지할 수 있다는 종합방제 기술을 제시하고 있다.

In this study, surface roughness and interfacial defect characteristics were analyzed after forming a high-k oxide film on the surface of a prime wafer and a test wafer, to study the possibility of improving the quality of the test wafer. As a result of checking the roughness, the deviation in the test after raising the oxide film was 0.1 nm, which was twice as large as that of the Prime. As a result of current-voltage analysis, Prime after PMA was 1.07 × 10 A/cm2 and Test was 5.61 × 10 A/cm2, which was about 5 times lower than Prime. As a result of analyzing the defects inside the oxide film using the capacitancevoltage characteristic, before PMA Prime showed a higher electrical defect of 0.85 × 1012 cm2 in slow state density and 0.41 × 1013 cm2 in fixed oxide charge. However, after PMA, it was confirmed that Prime had a lower defect of 4.79 × 1011 cm2 in slow state density and 1.33 × 1012 cm2 in fixed oxide charge. The above results confirm the difference in surface roughness and defects between the Test and Prime wafer.

A spin coating process for RRAM, which is a TiN/TiO2/FTO structure based on a PTC sol solution, was developed in this laboratory, a method which enables low-temperature and eco-friendly manufacturing. The RRAM corresponds to an OxRAM that operates through the formation and extinction of conductive filaments. Heat treatment was selected as a method of controlling oxygen vacancy (VO), a major factor of the conductive filament. It was carried out at 100 oC under moisture removal conditions and at 300 oC and 500 oC for excellent phase stability. XRD analysis confirmed the anatase phase in the thin film increased as the heat treatment increased, and the Ti3+ and OH- groups were observed to decrease in the XPS analysis. In the I-V analysis, the device at 100 oC showed a low primary SET voltage of 5.1 V and a high ON/OFF ratio of 104. The double-logarithmic plot of the I-V curve confirmed the device at 100 oC required a low operating voltage. As a result, the 100 oC heat treatment conditions were suitable for the low voltage driving and high ON/OFF ratio of TiN/TiO2/FTO RRAM devices and these results suggest that the operating voltage and ON/OFF ratio required for OxRAM devices used in various fields under specific heat treatment conditions can be compromised.

In recent years, interest in the welfare of soldiers is increasing. More specifically, soldiers enlisted to fulfill their military service obligations live a group life that is controlled by group life, unlike military officers selected by their will. Therefore, this study aims to verify whether there is an effect of improving the morale of soldiers by increasing the satisfaction of military service meals along with the trend of increasing morale through enhancement of soldier welfare. In order to achieve the purpose of this study, we surveyed 145 army soldiers working in the front and rear areas and used 137 valid samples for analysis. The results of this study are as follows. First, both SERVQUAL (Responsiveness․Assurance, Tangibles) and Servicescape (Spatial Environment, Spatial Design) had a positive (+) effect on military meal satisfaction. Second, military service satisfaction and emotional commitment have a positive (+) effect on morale. Third, satisfaction with military meals has a positive effect on emotional commitment. This research has also shown that improvements in SERVQUAL (Responsiveness․Assurance, Tangibles) and Servicescape (Spatial Environment, Spatial Design) improve military service satisfaction and emotional engagement. Military food service SERVQUAL (Responsiveness․Assurance, Tangibles) and Servicescape (Spatial Environment, Space Design) must pay attention to increase military morale.

The concrete silo dry storage system, which has been in operation at the Wolsong NPP site since 1992, consists of a concrete structure, a steel liner plate in the inner space, and a fuel basket. The silo system’s concrete structure must maintain structural integrity as well as adequate radiation shielding performance against the high radioactivity of spent nuclear fuel stored inside the storage system. The concrete structure is directly exposed to the external climatic environment in the storage facility and can be expected to deteriorate over time owing to the heat of spent nuclear fuel, as well as particularly cracks in the concrete structure. These cracks may reduce the radiation shielding performance of the concrete structure, potentially exceeding the silo system’s allowable radiation dose rate limits. For specimens with the same composition and physical properties as silo’s concrete structures, cracks were forcibly generated and then irradiated to measure the change in radiation dose rate to examine the effect of cracks in concrete structures on radiation shielding performance, and in the current state, the silo system maintains radiation shielding performance.

The spent nuclear fuel, combusted and released in the nuclear power plant, is stored in the spent fuel pool (SFP) located in the fuel buildings interconnected with the reactors. In Korea, spent fuel has been stored exclusively in SFPs, prompting initiatives to expand storage capacity by either installing additional SFPs or replacing them with high-density spent fuel storage racks. The installation of these fuel racks necessitates obtaining a regulatory license contingent upon ensuring safe fuel handling and storage systems. Regulatory agencies mandate the formulation of various postulated accident scenarios and assessments covering criticality, shielding, thermal behavior, and structural integrity to ensure safe fuel handling and storage systems. This study describes an evaluation method for assessing the structural damage to storage racks resulting from fuel dropping as a part of the functional safety evaluation of these racks. A scenario was envisaged wherein fuel was dropped onto the base plates of the upper and lower sections of the storage racks, and the impact load was analyzed using the ABAQUS/Explicit program. The evaluation results revealed localized plastic deformation but affirmed the structural integrity and safety of the storage racks.

Because most spent nuclear fuel storage casks have been designed for low burnup fuel, a safety-significant high burnup dry storage cask must be developed for nuclear facilities in Korea to store the increasing high burnup and damaged fuels. More than 20% of fuels generated by PWRs comprise high burnup fuels. This study conducted a structural safety evaluation of the preliminary designs for a high burnup storage cask with 21 spent nuclear fuels and evaluated feasible loading conditions under normal, off-normal, and accident conditions. Two types of metal and concrete storage casks were used in the evaluation. Structural integrity was assessed by comparing load combinations and stress intensity limits under each condition. Evaluation results showed that the storage cask had secured structural integrity as it satisfied the stress intensity limit under normal, off-normal, and accident conditions. These results can be used as baseline data for the detailed design of high burnup storage casks.

The 300 concrete silo systems installed and operated at the site of Wolsong nuclear power plant (NPP) have been storing CANDU spent nuclear fuel (SNF) under dry conditions since 1992. The dry storage system must be operated safely until SNF is delivered to an interim storage facility or final repository located outside the NPP in accordance with the SNF management policy of the country. The silo dry storage system consists of a concrete structure, liner steel plate in the inner cavity, and fuel basket. Because the components of the silo system are exposed to high energy radiation owing to the high radioactivity of SNF inside, the effects of irradiation during long-term storage must be analyzed. To this end, material specimens of each component were manufactured and subjected to irradiation and strength tests, and mechanical characteristics before and after irradiation were examined. Notably, the mechanical characteristics of the main components of the silo system were affected by irradiation during the storage of spent fuel. The test results will be used to evaluate the long-term behavior of silo systems in the future.