In this study, the adsorption/desorption performance of toluene was evaluated using zeolite adsorbent to replace activated carbon with one-off and ignition characteristics. For the proper operation of the VOCs adsorption/desorption and condensate recovery steps, the operating range by various adsorption/desorption temperatures was selected. The adsorbent is a bead-type zeolite, which was put into an adsorption tower of 10 LPM scale. As a result, it was demonstrated that 0.079 mg/g was adsorbed at a low temperature (20°C) during adsorption. In the case of desorption, it was found that VOCs adsorbed on the adsorbent were completely recovered after the desorption operation at 220°C for about 160 minutes. However, in the heating rate step for desorption, it was not possible to maintain an appropriate heating rate by filling the tower with zeolite. This was complemented by applying a copper plate with high thermal conductivity, and it was shown that the time was shortened by about 10 minutes or more. When VOCs are emitted at high concentrations during the desorption process, they can be reused as energy resources through low-temperature maintenance, and a condensation method was attempted. The efficiency of condensing chiller (cooler) with temperature control and liquid nitrogen condensing was compared. It was found that the chiller condensing efficiency increased as the temperature decreased. In the case of liquid nitrogen condensation, the liquid nitrogen temperature was maintained at -196°C, showing a stable efficiency of 90%.

This review presents current progress in the preparation methods of liquid crystalline nanocarbon materials and the liquid crystalline spinning method for producing nano-carbon fibers. In particular, we focus on the fabrication of liquid crystalline carbon nanotubes by spinning from superacids, and the continuous production of macroscopic fiber from liquid crystalline graphene oxide.