High nickel content Li(NixCoyMn1-x-y)O2 (NCM, x ≥ 0.9) cathode materials suffer from rapid capacity fading, a significant obstacle to their commercial application. To mitigate this issue, strategies such as doping and coating with various elements have been widely reported. In particular, multi-element doping has been explored as a potentially more effective alternative to single or dual element modification. Concurrently, the synthesis of high-entropy precursors via coprecipitation has gained significant attention. In this study, high nickel content precursors with nine components were synthesized by hydroxide coprecipitation under varying concentrations of ammonia that was employed as a chelating agent. The primary particle morphology of the precursors was found to be dependent on the ammonia concentration, which in turn influenced the physicochemical and electrochemical properties of the final cathode materials. At low ammonia concentration, the formation of secondary phases was detected. Notably, the cathode synthesized under high ammonia concentration exhibited excellent cycling stability, delivering a discharge capacity of 164.22 mAh/g after 100 cycles at 1 C, which corresponds to a capacity retention of approximately 91 % of its initial discharge capacity (180.50 mAh/g at 0.1 C).

Mold grows more easily when humidity is higher in indoor spaces, and as such is found more often on wetted areas in housing such as walls, toilets, kitchens, and poorly managed spaces. However, there have been few studies that have specifically assessed the level of mold in the indoor spaces of water-damaged housing in the Republic of Korea. We investigated the levels of airborne mold according to the characteristics of water damage types and explored the correlation between the distribution of mold genera and the characteristics of households. Samplings were performed from January 2016 to June 2018 in 97 housing units with water leakage or condensation, or a history of flooding, and in 61 general housing units in the metropolitan and Busan area, respectively. Airborne mold was collected on MEA (Malt extract agar) at flow rate of 100 L/min for 1 min. After collection, the samples were incubated at 25oC for 120 hours. The cultured samples were counted and corrected using a positive hole conversion table. The samples were then analyzed by single colony culture, DNA extraction, gene amplification, and sequencing. By type of housing, concentrations of airborne mold were highest in flooded housing, followed by water-leaked or highly condensed housings, and then general housing. In more than 50% of water-damaged housing, the level of airborne mold exceeded the guideline of Korea's Ministry of Environment (500 CFU/m3). Of particular concern was the fact that the I/O ratio of water-damaged housing was greater than 1, which could indicate that mold damage may occur indoors. The distribution patterns of the fungal species were as follows: Penicillium spp., Cladosporium spp. (14%), Aspergillus spp. (13%) and Alternaria spp. (3%), but significant differences of their levels in indoor spaces were not found. Our findings indicate that high levels of mold damage were found in housing with water damage, and Aspergillus flavus and Penicillium brevicompactum were more dominant in housing with high water activity. Comprehensive management of flooded or water-damaged housing is necessary to reduce fungal exposure.

The purpose of this study was to evaluate the role of survivin in various salivary gland tumors. For this study, total 18 cases of salivary gland tumors; 6 cases of benign and 12 cases of malignant tumors were used as experimental group. In benign tumors; pleomorphic adenoma, oncocytoma, and in malignant tumors; adenoid cystic carcinoma, mucoepidermoid tumor, high grade and low grade malignancy each, adenocarcinoma, acinic cell adenocarcinoma cases were included. And for the control group, fresh submandibular glands were attained from gnathosurgical specimen. All the specimens, experimental, control group were fixed in 10% neutral formalin solutions, embedded in paraffin, sectioned 5um or more in thickness, stained with the hematoxylin and eosin, mounted and examined under the microscope. For the immunohistochemical studies, all the specimens were activated with survivin monoclonal, and secondary antibodies as usual manners, and taken photos on various pathologic fields analysed with the image analysis system, and evaluated the positive and negative stained area in the tumors on each images and statistically analyzed with SPSS 15.0 program. Attained result as follows. In control group, in part, acini cells show positive reaction on the nuclei, negative on the all most of the cytoplasm, more intense reaction on the cytoplasm and nuclei on the serous demilune (47.33%). In experimental group, all the specimens show survivin positive reaction on the cytoplasm with/or without positive reaction on nuclei according to the tumors, in benign tumors; pleomorphic adenoma (63.48%), oncocytoma (56.31%), each and in malignant tumors; adenoid cystic carcinoma (87.6%), acinic cell adenocarcinoma (56.35%). adenocarcinoma (67.47%), mucoepidermoid carcinoma, low grade (70.76%). high grade (55.23%). Survivin expression shows higher in tumors compare to that on the control group (p<0.05), but between the malignant tumors no significant are not noted(p>0.005). Survivin expression is strongly related to the malignancy of salivary gland tumors

Mananbyeo was developed from a three way cross ilyang110/Yeongdeog7//Milyang110 in 1999. It has short growing duration about 71 days from seeding to heading and short culm length of 75 cm. It has almost similar number of panicles per hill , spikelets per