한반도 남해안 지역의 여름철 대기 안정도 특성을 분석함으로써, 한반도 특성에 맞는 강수 예측을 위한 대기 안정도 지수의 정량적인 임계값을 도출하고자 하였다. 보성 표준기상관측소에서 관측한 2019년도 여름철 라디오존데 집중관측자료를 분석에 사용하였으며, 총 관측자료는 243개이다. 강수 유무 및 중규모 대기 현상에 대한 대기 안정도를 분석하기 위해서, 대류가용잠재에너지(Convective Available Potential Energy, CAPE)와 폭풍지수(Storm Relative Helicity, SRH)를 비교하였으며 특히 SRH 분석은 고도별로 총 4개의 층으로(0-1, 0-3, 0-6, 0-10 km) 세분화하였다. 강수 유무에 따른 분석은 강수가 없는 경우, 강수발생 전 12시간, 강수 발생 시로 구분하여 수행하였다. 그 결과, 2019년도 보성에서 발생한 여름철 강수 예측에는 CAPE 보다 SRH가 더 적합하며 0-6 km SRH가 약한 토네이도가 발생 가능한 기준과 같은 150 m 2 s−2 이상일 경우 강수가 발생한 것으로 분석 된다. 또한, 장마와 태풍 기간의 대기 안정도를 분석한 결과를 보면, 일반적으로 SRH는 대기 깊이가 두꺼워질수록 값이 커지는데 반해서 0-10 km SRH 평균값 보다 0-6 km 의 SRH 값이 더 크게 나타났다. 따라서, 2019년도 보성에서 발생한 태풍에 의한 강수를 판별하는 데는 0-6 km 의 SRH 값이 더 효과적이라고 할 수 있다.

This study examined the color reproducibility and color fastness of digital textile printing for nylon sublimation transfer. After measuring the temperature and time suited to nylon sublimation transfer, the researchers conducted various tests for comparison and analysis including polyester transfer paper on polyester fabric to check dyeing characteristics, color change, sharpness, and the rubbing fastness of the dyeing samples for nylon sublimation transfer. These tests produced the following results. At 185℃ and 187℃, the sublimation transfer dyeing characteristics of nylon were similar to those of polyester and the researchers even observed superior color development in some colors; at a low temperature of 180℃, the sample that was worked on had the lowest level of color development. The examination of color difference (ΔE), which compared L*a*b* values, showed that the ΔE value of magenta was 10.34, that of yellow was 24.70, and that of black was 15.28. These results highlight the important role of heat treatment temperature and time on color development in nylon sublimation transfer. Concerning sharpness, the samples subjected to higher temperature heat treatment exhibited fewer color spreading phenomena around lines. Thus, dyeing properties and fastness can be enhanced by elongating time at low temperatures and shortening time at high temperatures; however, considering production time constraints as well as the need to produce industrially marketable quantities, the findings of this study suggest that the heat treatment temperature most suitable for nylon sublimation transfer is 187℃ for a duration of 50 seconds.

본 연구의 목적은 시멘트계 복합재료의 적층을 위해 증점제를 적용하여 개발한 출력배합의 수축 특성을 평가하고, 프린팅 기법을 이용해 제작한 적층시험체와의 수축 특성을 비교하는 데 있다. 증점제 적용 시 수축이 기준배합과 비교하여 평균 25% 저감(56일 기준)되는 것을 확인하였다. 수축이 저감되는 긍정적인 효과에 반해 압축강도는 약 15% 감소(28일 기준)되는 부정적인 효과도 확인되었다. 출력배합을 이용해 제작한 적층시험체와 몰드시험체를 이용하여 수축을 평가한 결과, 적층시험체의 수축변형률이 약 25% 감소(28일 기준)되는 것을 확인하였다. 본 연구결과를 통해 3D 프린팅을 이용한 시멘트계 복합재료의 출력 시 수축의 진전속도와 수축으로 인한 균열의 발생시점을 예측할 수 있을 것으로 판단된다.

A 41-year-old woman arrived at our emergency department with semicomatous mentality due to aborted cardiac arrest from ventricular fibrillation, which occurred during resting state. Prolonged QT interval in condition of hypokalemia and hypomagnesemia was observed on initial electrocardiography. However, even after normalization of serum potassium, magnesium and mentality, QT prolongation was sustained. In addition, genetic analysis showed KCNH2 mutation which was consistent with type 2 congenital long QT syndrome (LQTS). In this case, the patient was treated with an implantable cardioverter defibrillator and genotype specific medical therapy with potassium channel opener.

Salicornia europaea (glasswort) is succulent, annual, halophytic plant mainly distributed throughout reclaimed land or salt marsh. It has strong tolerance to salt so that it plays the part of the pioneer species in the first succession. According to domestic and foreign studies, S. europaea contains plenty of minerals and antioxidant in the body. Since people take note of an availableness of this plant as health diet, the natural growth sites are threatened. In addition to development of salt marsh and sea shore, imprudent harvest has a bad effect to S. europaea population maintenance. To seek ways to preserve the population of this plant, we carried out the continuity of seed germination and restoration test. Seokmo Island, Daebu Island, Youngjong Island and Sudokwon landfill in Korea are selected sites for research. Result of germination continuity shows that most S. europaea seeds germinate on March but no more after July. However the germination was occurred after that time in the greenhouse. So we concluded that no germination after July is a matter of environmental condition not the number of remaining seeds. Also germination was seldom occurred in the spot where seeds production was not happened. In result of continuity test of seed germination by soil depth, germination was occurred vigorously only in top soil. From these results, we note that most S. europaea germinate in the early spring, and germination is finished by July. And this rapid germination speed makes the number of seeds in soil seed bank rare. If a large number of S. europaea in some area are harvested after July, the number of this species will dramatically decrease in that area the following year. In Seokmo Island, we carried out reintroduction experiment by sowing S. europaea seeds. On the first year, a small number of S. europaea settled and they produced seeds successfully. On April 2010, the second year, we observed many S. europaea in seed sowing sites. And we found out that plowing is more efficient than treatment sea water for settlement of S. europaea.