PURPOSES : This paper presents a description of the current issues facing road managers regarding the surface-type conversion of lowvolume roads for cost savings. METHODS: The paper reviews previous works conducted toward this end, acknowledges gaps in the current research, and lays out what information is needed for further studies. RESULTS : If the cost to maintain an unsurfaced road is less than the cost of maintaining a surfaced road, then there is potential for cost savings for the management agency. However, the problem is bigger than simply maintaining the roads that already exist. If unsurfaced roads prove to be more economical than surfaced roads, then the cost to convert from a surfaced to an unsurfaced roadway, and vice versa, when necessary, must also be examined. CONCLUSIONS : No other studies have addressed the un-surfacing of a road for cost savings, and it is therefore unknown whether substantial savings can be realistically obtained by converting from a surfaced to an unsurfaced road. To determine whether a conversion policy would be a viable option, additional data and research are needed.

이전 연구들에서 rutin과 quercetin을 포함한 여러 flavonoids의 암예방 활성이 보고되었으나, rutin의 경우 섭취 시 체내에서 HVA, HPAA, DHT라는 대사체로 변형되어 흡수된다. 그러나, 이들 대사체와 관련한 암예방 효능 및 그 분자생물학적 작용기작에 대한 연구 결과는 보고된 바가 없어, 본 연구에서 이를 규명하였다. DHT는 EGF로 유도된 세포 변형을 억제하였으며, AP-1 전사인자의 활성 또한 억제하였다. DHT는 Raf-1 효소 활성을 효과적으로 저해하므로서 MEK 및 ERK의 인산화를 억제하였으며, Raf-1과 ATP는 비경쟁적으로 직접 결합하여 Raf-1 효소 활성을 저해한다는 사실을 밝혀내었다. 이와는 대조적으로, rutin은 EGF로 유도된 세포 변형, AP-1 활성, ERK 신호전달체계, Raf-1 효소 활성을 억제하지 못하였다. 이상의 연구결과는 DHT의 암예방 활성이 발암과정과 밀접한 연관이 있는 Raf-1 효소 활성을 억제하여 세포 변형을 억제하는 것과 관련되어 있다는 것을 제시한다.

In this experiment, a highly porous scaffold of biphasic calcium phosphate (BCP) was prepared using the spongereplica method. The BCP scaffold was coated with 58S bioactive glass (BG) and sintered for a second time. The resulting scaffold was coated with gelatin (Gel) and cross-linked with [3-(3-dimethyl aminopropyl) carbodiimide] and N-Hydroxysuccinamide (EDC-NHS). The initial average pore size of the scaffold ranged from 300 to 700μm, with more than 85 % porosity. The coating of BG and Gel had a significant effect on the scaffold-pore size, decreasing scaffold porosity while increasing mechanical strength. The material and surface properties were evaluated by means of several experiments involving scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) and X-ray diffraction (XRD). Cytotoxicity was evaluated using MTT assay and confocal imaging of MC3T3-E1 pre-osteoblast cells cultured in vitro. Three types of scaffold (BCP, BCP-BG and BCP-BG-Gel) were implanted in a rat skull for in vivo evaluation. After 8 weeks of implantation, bone regeneration occurred in all three types of sample. Interestingly, regeneration was found to be greater (geometrically and physiologically) for neat BCP scaffolds than for two other kinds of composite scaffolds. However, the other two types of scaffolds were still better than the control (i.e., defect without treatment).

The aim of this study was to determine the beneficial effect of propofol on human keratinocytes that have undergone hypoxia reoxygenation (H/R) injury and to investigate whether autophagy is associated with the protective mechanism. Thus, we evaluated how propofol influences the intracellular autophagy and apoptosis during the H/R process in the HaCaT cells. The cultured human keratinocyte cells were exposed to 24 h of hypoxia (5% CO2, 1% O2, 94% N2) followed by 12 h of reoxygenation (5% CO2, 21% O2, 74% N2). The experiment was divided into 4 groups: (1) Control=Normoxia ; (2) H/R=Hypoxia Reoxygenation ; (3) PPC+H/R=Propofol Preconditioning+Hypoxia Reoxygenation; (4) 3-MA+PPC+ H/R=3-MA-Methyladenine+Propofol Preconditioning+ Hypoxia Reoxygenation. In addition, Western blot analysis was performed to identify the expression of apoptotic pathway parameters, including Bcl-2, Bax, and caspase 3 involved in mitochondrial-dependent pathway. Autophagy was determined by fluorescence microscopy, MDC staining, AO staining, and western blot. The H/R produced dramatic injuries in keratinocyte cells. In our study, the viability of Propofol in H/R induced HaCaT cells was first studied by MTT assay. The treatment with 25, 50, and 100 μM Propofol in H/R induced HaCaT cells enhanced cell viability in a dose-dependent manner and 100 μM was the most effective dose. The Atg5, Becline-1, LC3-II, and p62 were elevated in PPC group cells, but H/R-induced group showed significant reduction in HaCaT cells. The Atg5 were increased when autophagy was induced by Propofol, and they were decreased when autophagy was suppressed by 3-MA. These data provided evidence that propofol preconditioning induced autophagy and reduced apoptotic cell death in an H/R model of HaCaT cells, which was in agreement with autophagy playing a very important role in cell protection.

The purpose of this study was to isolate and identify bacteria from the 4 patients with non-odontogenic infectious lesions (mucormycosis, chronic inflammation from wound infection, and two actinomycosis) and determine their antimicrobial susceptibility against eight antibiotics. Bacterial culture was performed under three culture conditions (anaerobic, CO2, and aerobic incubator). The bacterial strains were identified by 16S rRNA gene (16S rDNA) sequence comparison analysis method. For investigating the antimicrobial susceptibility of the bacteria against eight antibiotics, penicillin G, amoxicillin, tetracycline, cefuroxime, erythromycin, clindamycin, vancomycin, and Augmentin® (amoxicillin + clavulanic acid), minimum inhibitory concentration (MIC) measurement was performed using broth microdilution assay. Nosocomial pathogens such as Enterococcus faecalis, Klebsiella pneumoniae, Bacillus subtilis, and Neisseria flavescens were isolated from mucormycosis. Veillonella parvula, Enterobacter hormaechei, and Acinetobacter calcoaceticus were isolated from chronic inflammatory lesion. Actinomyces massiliensis was isolated from actinomycosis in parotid gland. Capnocytophaga ochracea was isolated from actinomycosis in buccal region in anaerobic condition. There was no susceptible antibiotic to all bacteria in mucormycosis. Tetracycline was susceptible to all bacteria in chronic inflammation. C. ochracea was resistant to vancomycin and penicillin G; and other antibiotics showed susceptibility to all bacteria in actinomycosis. The results indicated that the combined treatment of two or more antibiotics is better than single antibiotic treatment in mucormycosis, and penicillin is the first recommended antibiotic to treat actinomycosis.

Fe doped TiO2 nanoparticles were prepared under high temperature and pressure conditions by mixture of metal nitrate solution and TiO2 sol. Fe doped TiO2 particles were reacted in the temperature range of 170 to 200˚C for 6 h. The microstructure and phase of the synthesized Fe doped TiO2 nanoparticles were studied by SEM (FE-SEM), TEM, and XRD. Thermal properties of the synthesized Fe doped TiO2 nanoparticles were studied by TG-DTA analysis. TEM and X-ray diffraction pattern shows that the synthesized Fe doped TiO2 nanoparticles were crystalline. The average size and distribution of the synthesized Fe doped TiO2 nanoparticles were about 10 nm and narrow, respectively. The average size of the synthesized Fe doped TiO2 nanoparticles increased as the reaction temperature increased. The overall reduction in weight of Fe doped TiO2 nanoparticles was about 16% up to ~700˚C; water of crystallization was dehydrated at 271˚C. The transition of Fe doped TiO2 nanoparticle phase from anatase to rutile occurred at almost 561˚C. The amount of rutile phase of the synthesized Fe doped TiO2 nanoparticles increased with decreasing Fe concentration. The effects of synthesis parameters, such as the concentration of the starting solution and the reaction temperature, are discussed.

Perovskite manganites such as RE1-xAxMnO3 (RE = rare earth, A = Ca, Sr, Ba) have been the subject of intense research in the last few years, ever since the discovery that these systems demonstrate colossal magnetoresistance (CMR). The CMR is usually explained with the double-exchange (DE) mechanism, and CMR materials have potential applications for magnetic switching, recording devices, and more. However, the intrinsic CMR effect is usually found under the conditions of a magnetic field of several Teslas and a narrow temperature range near the Curie temperature (Tc). This magnetic field and temperature range make practical applications impossible. Recently, another type of MR, called the low-field magnetoresistance(LFMR), has also been a research focus. This MR is typically found in polycrystalline half-metallic ferromagnets, and is associated with the spin-dependent charge transport across grain boundaries. Composites with compositions La0.7(Ca1-xSrx)0.3MnO3)]0.99/(BaTiO3)0.01 [(LCSMO)0.99/(BTO)0.01]were prepared with different Sr doping levels x by a standard ceramic technique, and their electrical transport and magnetoresistance (MR) properties were investigated. The structure and morphology of the composites were studied by X-ray diffraction (XRD) and scanning electronic microscopy (SEM). BTO peaks could not be found in the XRD pattern because the amount of BTO in the composites was too small. As the content of x decreased, the crystal structure changed from orthorhombic to rhombohedral. This change can be explained by the fact that the crystal structure of pure LCMO is orthorhombic and the crystal structure of pure LSMO is rhombohedral. The SEM results indicate that LCSMO and BTO coexist in the composites and BTO mostly segregates at the grain boundaries of LCSMO, which are in accordance with the results of the magnetic measurements. The resistivity of all the composites was measured in the range of 90-400K at 0T, 0.5T magnetic field. The result indicates that the MR of the composites increases systematically as the Ca concentration increases, although the transition temperature Tc shifts to a lower range.

Intracytoplasmic sperm injection (ICSI) is one of the artificial fertilization methods when only a few sperm are available for insemination, and an important tool for the preservation of genetic materials of endangered animal species, especially the male is infertile. Different from other species such as mice and pigs, the conventional ICSI method which uses spiked pipette for injection (Spike-ICSI) is exhibited low success rates in cattle because the bovinesperm head membrane is hard to break during injection procedure. We chose piezo-assisted ICSI (Piezo-ICSI) for the improvement of the injection procedure including sperm head membrane rupture and efficient puncture of the plasma membrane of the oocytes. In this experiment, we compared the efficacy of the bovine ICSI embryo production between the Piezo-ICSI and Spike-ICSI. The second polar body extrusion, pronuclear formation, cleavage and blastocyst formation were evaluated after implementation of two different ICSI techniques. The Piezo-ICSI tended to show comparably higher rates of the second polar body extrusion (41.7%), the pronuclei formation (42.9%) and the two-cell cleavage (41.4%) than Spike-ICSI does (33.3%, 28.6% and 23.5%, respectively) although there is no statistic significance between two groups. In addition, the blastocysts were only obtained from the Piezo-ICSI group (10.3%). Our finding shows that the Piezo-ICSI may be used as an artificial fertilization method in cattle when in vitro fertilization is not applicable.

The early Ordovician graptolites from the upper part (Tumok Member) of the Mungok Formation of the Namaeri and Baeiljae sections at Yeongwol consist of five species belonging to five genera. They are Adelograptus cf. tenellus, Callograptus sp., Dendrograptus suni, Dictyonema sp., and Psigraptus jacksoni. Of these 5 species, Psigraptus is the most excellent index fossil for international correlation with the early Ordovician strata. Adelograptus cf. tenellus from the Mungok Formation of the Namaeri and Baeiljae sections is also recognized with especially short stipe relative to Adelograptus tenellus. Three graptolite zones (such as Adelograptus, Psigraptus, and Dendroid type zones) are correlated with those of Canada, Australia, and China, respectively. The upper part of the Mungok Formation is assigned to the late Tremadocian.

Lotus-type porous nickel with cylindrical pores was fabricated by unidirectional solidification under an Ar gas atmosphere using the thermal decomposition method of the compounds such as sodium hydroxide, calcium hydroxide, calcium carbonate, and titanium hydride. The decomposed gas does form the pores in liquid nickel, and then, the pores become the cylindrical pores during unidirectional solidification. The decomposed particles from the compounds do play a rule on nucleation sites of the pores. The behavior of pore growth was controlled by atmosphere pressure, which can be explained by Boyle's law. The porosity and pore size decreased with increasing Ar gas pressure when the pores contain hydrogen gas decomposed from calcium and sodium hydroxide and titanium hydride, ; however it they did not change when the pores contain containing carbon dioxide decomposed from calcium carbonate. These results indicate that nickel does not have the solubility of carbon dioxide. Lotus-type porous metals can be easily fabricated by the thermal decomposition method, which is superior to the conventional fabrication method used to pressurized gas atmospheres.

Simple and high efficiency green phosphorescent devices using an intermixed double host of 4, 4', 4"-tris(N-carbazolyl) triphenylamine [TCTA], 1, 3, 5-tris (N-phenylbenzimiazole-2-yl) benzene [TPBI], phosphorescent dye of tris(2-phenylpyridine)iridium(III) [Ir(ppy)3], and selective doping in the TPBI region were fabricated, and their electro luminescent characteristics were evaluated. In the device fabrication, layers of 70Å-TCTA/90Å-TCTA[0.5TPBI0.5/90Å-TPBI doped with Ir(ppy)3 of 8% and an undoped layer of 50Å-TPBI were successively deposited to form an emission region, and SFC137 [proprietary electron transporting material] with three different thicknesses of 300Å, 500Å, and 700Å were used as an electron transport layer. The device with 500Å-SFC137 showed the luminance of 48,300 cd/m2 at an applied voltage of 10 V, and a maximum current efficiency of 57 cd/A under a luminance of 230 cd/m2. The peak wavelength in the electroluminescent spectral and color coordinates on the Commission Internationale de I'Eclairage [CIE] chart were 512 nm and (0.31, 0.62), respectively.