본 연구를 통해 미기록종 Acronicta gigasa (큰뿔무늬저녁나방, 신칭)를 한국에 최초로 보고한다. 이 종에 대한 진단과 분류학적 기재문을 작성 하였고, 성충과 생식기 도해사진을 함께 제공하였다.

국립원예특작과학원에서는 밝은 화색과 안정적인 화형의 생 육이 우수한 빨간색 스탠다드 장미 품종을 육성하기 위해 진한 적색 스탠다드 장미 품종 ‘엔드리스러브(Endless Love)’를 모 본으로, 꽃잎수가 많고 안정적으로 가시가 적은 밝은 노란색 ‘페니레인(Penny Lane)’ 품종을 부본으로 인공교배하였다. 37 개의 교배실생을 양성해 1, 2, 3차에 걸친 특성검정 및 현장실증 을 통해 꽃이 크고 화형이 안정적이며, 재배안정성 및 생산성, 절화특성이 우수한 ‘원교 D1-390’을 최종 선발하였다. 2023년 ‘루비레드(Ruby Red)’로 명명하여 국립종자원에 품종보호출원·등록되었다. ‘루비레드’ 품종은 밝은 적색(R53C)을 가졌으 며, 꽃잎수가 32.8매, 화폭과 화고는 각각 10.9, 5.9cm로 대조 품종보다 크다. 절화장은 평균 71.7cm, 절화수명은 약 16.7일, 수량은 연간 168대/m2로 대조품종인 ‘레드스퀘어(Red Square)’ 대비 절화장이 길고 절화수명도 2배 이상 길며, 수확량도 1.4배 우수하다. 2023년 국내 육성 장미 품종 서울식물원 관람객 대상 공동평가회에서 스탠다드 장미 중 우수한 평가를 받았으며, 현 장 실증 결과 농가별로 균일하고 우수한 수량과 절화품질을 보 였다. 절화용 장미 ‘루비레드’ 품종은 밝은 적색과 우수한 화형 을 가지는 품종으로 해외 대체 품종으로 국내에서 많이 재배될 것으로 기대된다.

Unlike companion cats raised at home, feral cats are more likely to be infected with parasites. Feral cats can transmit parasites not only to other cats but also to pets and people. This study was conducted to investigate prevalence intestinal parasites prevalence through the fecal examination of feral cats in Gunsan City. After making a suspension in Sheather's Sucrose solution, the feces were mixed and centrifuged, and then examined under a microscope. The results were revealed mostly unsporulated oocysts and sporulated oocysts of coccidia, followed by pinworm's eggs, which showed a relatively high infection rate. Scabies and mites were also found in the feces. Due to the behavioral characteristics of cats, they tend to remove the foreign objects from their fur through grooming, which is why a lot of hairs were observed in the feces, and it is thought that this is why scabies and mites were also found in the fecal examination results. The results of this study confirm that feral cats are exposed to those parasites. It is also thought that consideration should be given to expanding the TNVR (trap-neuter-vaccinate-release) program, which can reduce the number of feral cats.

Schlumbergera truncata absorbs CO2 through its mature phylloclades during the night, and can use a substantial amount of CO2 without requiring ventilation. This study investigated the growth and photosynthetic responses of S. truncata ‘Red Candle’ at two CO2 levels—ambient (≈ 400 μmol･mol-1) and elevated (≈ 1000 μmol･mol-1). At 0–8 weeks after treatment (WAT), width and length of mature phylloclade and length of immature phylloclade did not differ significantly among the CO2 treatments. At 4–8 WAT, number of branches and phylloclades were significantly greater in plants grown under ambient CO2 than those under elevated CO2. Net CO2 uptake was highest in mature phylloclades of plants grown under ambient and elevated CO2 regimes at night, at 2.51 and 1.30 μmol·CO2·m-2·s-1, respectively. However, no statistically significant variation was observed at 6 WAT, and stomatal conductance was significantly affected only by CO2 uptake time at 6 and 8 WAT. Water-use efficiency of mature and immature phylloclades at night increased with increase in CO2 levels (r = 0.7462 and 0.9312, respectively). At 123 days after treatment, plants grown under elevated CO2 had 82.7 floral buds, compared to 72.1 buds in those under ambient CO2. However, this difference was not statistically significant. Moreover, S. truncata grown under elevated CO2 exhibited decreased growth and photosynthesis, whereas the number of floral buds did not exhibit any significant differences among the treatments.

본 논문은 모바일 폰 사진을 활용하여 도시 공간에서 전력선과 건물 사이의 거리를 편리하게 모델링하고 측정하는 방법에 중점을 두고 있으며, 이에 대한 정확성을 평가하였다. 모바일 장 치용 2뷰 지오메트리를 사용한 전력선과 건물의 3D 재구성 방법을 설계하여 어디에서나 즉시 측정할 수 있도록 하였다. 특징점을 사용하여 전력선과 건물 사이의 거리를 계산하고 건물 정 보를 활용하여 게임 가상 공간에 전력선과 전주를 배치할 수 있다. 본 논문에서는 대전시 내 10개의 위치에서 실험을 실시하고, 상업용 시스템과 LiDAR가 있는 경우와 없는 경우를 포함 한 이전 방법과의 성능을 평가하였다. 우리의 방법을 스마트폰에 구현했기 때문에 장점은 휴 대성과 저렴함이다.

AR (alkali resistant)-glass fibers were developed to provide better alkali resistance, but there is currently no research on AR-glass fiber manufacturing. In this study, we fabricated glass fiber from AR-glass using a continuous spinning process with 40 wt% refused coal ore. To confirm the melting properties of the marble glass, raw material was put into a (platinum) Pt crucible and melted at temperatures up to 1,650 °C for 2 h and then annealed. To confirm the transparent clear marble glass, visible transmittance was measured and the fiber spinning condition was investigated by high temperature viscosity measurement. A change in diameter was observed according to winding speed in the range of 100 to 700 rpm. We also checked the change in diameter as a function of fiberizing temperature in the range of 1,240 to 1,340 °C. As winding speed increased at constant temperature, fiber diameter tended to decrease. However, at fiberizing temperature at constant winding speed, fiber diameter tended to increase. The properties of the prepared spinning fibers were confirmed by optical microscope, tensile strength, modulus and alkali-resistance tests.

많은 연구에 따르면 Tenebrio molitor은 유충 단계에서 플라스틱을 섭취할 수 있다고 보고되었다. 이 연구의 목적은 T. molitor 유충의 성장과 발달에 발포폴리스티렌 섭취가 미치는 영향을 조사하는 것이다. 밀기울을 섭취한 유충의 성장률은 발포폴리스티렌을 섭취한 유충의 성장률보다 더 좋았고(p < 0.001) 발포폴리스티렌을 섭취한 유 충의 번데기로 전환되는 기간은 밀기울을 섭취한 유충의 번데기로 전환되는 기간보다 더 빨랐다(p < 0.001). 하지만 두 처리구간 생존율은 유의미한 차이가 없었다(p = 0.786). 이 결과에 따르면 발포폴리스티렌을 섭취한 유충은 체중 감소와 짧은 발육기간이 특징이지만 생존하는 것에는 문제가 없었다. 따라서 우리는 T. molitor가 플라스틱 폐기물 의 지속 가능하고 친환경적인 제거를 위한 주요 자원이라는 결론을 내렸다.

거저리는 식품으로 사용되기 때문에 유충기가 오래 지속되면 더 좋다. 반면에 거저리의 개체수 유지를 위 해 성장을 가속화하기 위해서는 유충이 빨리 성충이 되면 더 좋다. 이 연구에서는 개체군 밀도가 거저리의 발달 시 간에 미치는 영향을 구명하였다. 이를 위해 상단 7 cm, 하단 5 cm, 높이 3 cm 크기의 용기를 사용했다. 거저리는 용기 당 1, 2, 5, 10, 20마리의 밀도로 용기에서 서식하였다. 용기에 밀기울 1 g을 넣고 거저리의 먹이 여부에 따라 라벨을 붙였다. 실험은 세 번 반복되었다. 모든 실험에서 개체군 밀도가 높을수록 유충에서 번데기로의 변환 시간이 짧았 지만 번데기에서 성충으로 변환되는 시간은 크게 다르지 않았다. 또한 먹이가 있는 그룹에서 번데기로의 변환 시간 이 단축되었지만, 성충으로 변환되는 시간에는 차이가 없었다. 이 연구 결과는 유충기를 연장하기 위해 더 낮은 밀 도가 필요하고 더 빠른 속도로 성충이 필요하다면 밀도가 더 높아야 한다는 것을 보여주었다. 결론적으로 거저리의 발달 시간은 개체수 밀도에 의해 제어할 수 있을 것이다.

Carbon fusion is important to understand the late stages in the evolution of a massive star. Astronomically interesting energy ranges for the 12C+12C reactions have been, however, poorly constrained by experiments. Theoretical studies on stellar evolution have relied on reaction rates that are extrapolated from those measured in higher energies. In this work, we update the carbon fusion reaction rates by fitting the astrophysical S-factor data obtained from direct measurements based on the Fowler, Caughlan, & Zimmerman (1975) formula. We examine the evolution of a 20M⊙ star with the updated 12C+12C reaction rates performing simulations with the MESA (Modules for Experiments for Stellar Astrophysics) code. Between 0.5 and 1 GK, the updated reaction rates are 0.35 to 0.5 times less than the rates suggested by Caughlan & Fowler (1988). The updated rates result in the increase of core temperature by about 7% and of the neutrino cooling by about a factor of three. Moreover, the carbon-burning lifetime is reduced by a factor of 2.7. The updated carbon fusion reaction rates lead to some changes in the details of the stellar evolution model, their impact seems relatively minor compared to other uncertain physical factors like convection, overshooting, rotation, and mass-loss history. The astrophysical S-factor measurements in lower energies have large errors below the Coulomb barrier. More precise measurements in lower energies for the carbon burning would be useful to improve our study and to understand the evolution of a massive star.

Because plastics are cheap and light, their use is indispensable in our daily lives. However, the extensive use of plastics causes the disposal issue. Among various disposal processes, plastic recycling is of great attention because of minimizing waste and harmful byproducts. Herein, we recycle the most popular thermoplastic materials, high-density and low-density polyethylene, producing the anode materials for the Li-ion batteries. The electrochemical properties of the as-recycled soft carbon are investigated to study the energy storage capability as the anode of Li-ion batteries. Our work demonstrates the soft carbon recycled from plastic wastes is a promising anode material.

Background: This study focused on reproductive traits in Hanwoo cattle, specifically the environmental factors affecting gestation length and birth weight. Methods: The records of 1,540 cows calved at the Hanwoo Research Institute from 2015 to 2023 were examined. This study analyzed two populations, linebreeding Hanwoo (LBH) and general Hanwoo (GH), with all cows undergoing estrus synchronization and artificial insemination. The R software was used to compare the differences between the two populations and analyze the environmental factors affecting each trait. Results: The results showed that the average gestation length for LBH was 283.28 ± 5.93 days, which was significantly shorter than that of the GH, which had an average of 285.63 ± 6.21 days (p < 0.001). The average birth weight of LBH calves was 25.10 ± 3.69 kg, significantly lighter than GH calves, which weighed 27.26 ± 4.11 kg on average (p < 0.001). Analysis of environmental factors revealed significant differences in the gestation length of LBH based on dam parity, year, and season of calving. However, no significant differences were observed based on calf sex. For LBH, birth weight showed significant differences based on dam parity, year of calving, and sex of the calf, but not the season of calving. In GH, gestation length varied with dam parity and calving season, but not with calving year or calf sex. The GH birth weight showed differences based on dam parity, year of calving, and calf sex, but not the season of calving. Conclusions: Reproductive traits in the Hanwoo cattle industry are economically vital but are heavily influenced by environmental factors due to their low heritability. An accurate evaluation of the genetic potential of these traits requires an analysis of the environmental factors affecting them. The results of this study serve as foundational data for predicting the potential for genetic improvement in the gestation length and birth weight of Hanwoo cattle.

The pet industry, especially pet food, is experiencing rapid growth. This growth is accompanied by increasing concerns about pets' gut health, as an imbalanced microbiota can lead to various diseases. This study analyzes global patent trends in microbiome-based technologies for treating pet digestive issues using the WIPS database across major markets. Of 1,194 patents identified, 394 key references were examined, highlighting the increasing number of probiotic and microbiome-related patents since 2016. China dominates this sector, followed by Korea, Japan, and the United States. The findings provide a foundation for advancing microbiome-driven solutions for pet digestive ailments.